İçeriğe atla
Otomasyon parçaları, dünya çapında tedarik
Ürün bilgisine atla
1 / 3

SKU:V18345-1010520001

Valve Positioner ABB V18345-1010520001

Stokta (11 adet), gönderilmeye hazır
  • Manufacturer: ABB

  • Product No.: V18345-1010520001

  • Product Type: Valve Positioner Module

  • Product Origin: Sweden

  • Payment:T/T, Western Union

  • Weight: 1700g

  • Shipping port: Xiamen

  • Warranty: 12 months

30 Gün İade Politikası · 12 Ay Garanti
  • Hızlı Teslimat
  • 7/24 Destek
  • Kalite Güvencesi

Açıklama

Product Overview

ABB V18345-1010520001 is an electro-pneumatic valve positioner from the TZIDC series, built for precise control of pneumatic actuators on large rotary machinery. It converts a 4–20 mA control signal into a proportional air output, achieving 0.5% linearity and ±0.2% repeatability. The non-contact position sensor eliminates mechanical wear, delivering stable performance in turbine, compressor, and process valve applications.

Technical Configuration

Core Hardware

The positioner uses a piezoresistive pressure sensor for air output feedback and a Hall-effect sensor for valve stem position. The HART protocol enables remote calibration and diagnostics without breaking the air loop. A local LCD and push-buttons allow on-site setup, zero/span adjustment, and fault readout.

Technical Specifications

Parameter Value
Input Signal 4–20 mA (HART)
Air Supply 1.4–6.0 bar
Air Consumption ≤0.03 kg/h (steady state)
Linearity ±0.5% of span
Repeatability ±0.2% of span
Operating Temperature -40°C to +80°C
Protection Class IP65
Pneumatic Ports 1/4" NPT
Electrical Entry M20×1.5
Housing Material Aluminum, powder-coated
Weight Approx. 1.7 kg

Installation Guide

Mount the positioner rigidly on the actuator yoke and verify the feedback lever travels 0–100% without binding. Set the air supply to 1.4 bar minimum; below this, the output may not reach full stroke. Keep cable bend radius above 50 mm and route signal wiring away from VFD cables. For explosive atmospheres, confirm the certification label matches the zone classification before energizing.

Engineering Advantages

The TZIDC platform tolerates supply air contaminated with oil and dust, reducing downtime in dirty plant environments. The aluminum housing resists corrosion in coastal and chemical plants. HART diagnostics report valve signature data, helping maintenance teams plan repairs before a trip occurs. The unit drops into existing 4–20 mA loops without extra wiring.

Technical FAQs

Q1: How do I verify the positioner is calibrated correctly?
A1: Apply 4 mA and confirm the valve reaches 0% stroke; apply 20 mA and confirm 100%. Check the LCD readout matches the actual stem position within ±0.5%.

Q2: What does the 1010520001 suffix indicate?
A2: It defines the analog HART input, double-acting output, IP65 aluminum housing, and standard temperature range. Confirm against the nameplate before ordering spares.

Q3: Can this unit replace an older TZIDC positioner?
A3: Yes, it shares the same mounting footprint and 4–20 mA interface. Verify the pneumatic port size and cable entry match the existing installation.

Product Resources

📄 Download PDF
  • Gümüş

Skaler (V/f)

Vektör

AC ile çalışan

  • Sipariş vermeden önce kesin model, parça numarası ve teknik özellikleri doğrulayın.
  • Mevcut makine veya kontrol sistemlerinizle uyumluluğu kontrol edin.
  • Teknik destek için sale@etowonauto.com adresinden veya +8617859788089 numarasından iletişime geçin.
  • Teslimat seçeneklerini, teslim sürelerini ve nakliye gereksinimlerini inceleyin.
  • Kurulum sırasında üretici talimatlarını ve en iyi uygulamaları takip edin.

Stokta bulunan ürünler genellikle aynı iş günü içinde gönderilir. Şu anda stokta olmayan ürünler için gönderim süreleri, ürünün bulunabilirliğine göre değişiklik gösterebilir. Uluslararası gönderim mevcuttur ve gönderim ücretleri varış yeri, ağırlık ve taşıyıcı seçimine göre hesaplanır.

Ürünler kullanılmamış ve orijinal durumda olmak koşuluyla, teslim alındıktan sonraki 30 gün içinde iade kabul edilir. İade gönderim ücretleri müşteriye aittir. Lütfen herhangi bir ürünü iade etmeden önce iade onayı almak için bizimle iletişime geçin.

Daha fazla bilgi için lütfen Gönderim ve İade Politikamızı inceleyin.

Tüm ayrıntıları görüntüle

GÜVENİLİR MAKİNE PERFORMANSINI GARANTİLEYİN

Evinizi, akıllı aydınlatmadan ses kontrollü cihazlara kadar hayatı daha kolay, güvenli ve bağlantılı hale getirmek için tasarlanmış en yeni çoklu elektronik çözümlerle dönüştürün. Arızaları önlemek ve çalışma süresini maksimize etmek için gerçek zamanlı titreşim ve makine durumu izleme sunan Bently Nevada 3500 İzleme Sistemi ile operasyonlarınızı optimize edin.