Evinizi, akıllı aydınlatmadan ses kontrollü cihazlara kadar hayatı daha kolay, güvenli ve bağlantılı hale getirmek için tasarlanmış en yeni çoklu elektronik çözümlerle dönüştürün. Arızaları önlemek ve çalışma süresini maksimize etmek için gerçek zamanlı titreşim ve makine durumu izleme sunan Bently Nevada 3500 İzleme Sistemi ile operasyonlarınızı optimize edin.
SKU:6ES7350-1AH03-0AE0
SIEMENS 6ES7350-1AH03-0AE0 S7-300 Counter Module
Manufacturer: Siemens
Product No.: 6ES7350-1AH03-0AE0
Product Type: Counter Module
Product Origin: DE
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months
Paylaş
- Hızlı Teslimat
- 7/24 Destek
- Kalite Güvencesi
Açıklama
SIEMENS 6ES7350-1AH03-0AE0 SIMATIC S7-300 FM 350-1 Counter Module
The SIEMENS 6ES7350-1AH03-0AE0, also cataloged as the FM 350-1 Counter Module, operates as a dedicated single-channel high-speed counter for S7-300 systems, processing incremental encoder signals up to 500 kHz over the backplane bus.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6ES7350-1AH03-0AE0 |
| Brand | SIEMENS |
| Product Type | FM 350-1 Counter Module |
| Series | SIMATIC S7-300 |
| Weight | 250 g (approx.) |
| Dimensions | 40 mm width x 125 mm height x 120 mm depth |
| Rated Supply Voltage | 24 VDC |
| Permissible Voltage Range | 20.4 V to 28.8 VDC (dynamic 18.5 V to 30.2 V) |
| Current from Load Voltage 1L+ | 40 mA max (without load) |
| Current from Backplane Bus | 160 mA max at 5 VDC |
| Power Loss | 4.5 W typ. |
| Counter Inputs | 1 channel, 32 bit or +/-31 bit |
| Counting Frequency | 500 kHz max (5 V), 200 kHz max (24 V) |
| 5 V Encoder Supply | 5.2 V +/-2%, 300 mA max |
| 24 V Encoder Supply | 1L+ (-3 V), 400 mA max |
| Digital Inputs | 3 (gate start, gate stop, counter set) |
| Digital Outputs | 2, short-circuit protected, 0.5 A rated |
| Front Connector | 1x 20-pin |
| Isolation | Tested at 500 V |
Counter Inputs and Encoder Interface
Single 32-bit counter channel accepts symmetrical incremental encoders with two pulse trains offset by 90 deg, asymmetrical incremental encoders, 24 V initiators, and 24 V directional elements with one pulse train and one direction level. The 5 V counter input uses RS 422 differential signaling with a 220 ohm terminating resistor and 1.3 V differential input voltage. The 24 V counter input accepts +11 V to +28.8 V for signal "1" and -28.8 V to +5 V for signal "0" at 9 mA typical input current, with a minimum pulse width of 2.5 us. Potential separation between channels and the backplane bus is provided by optocouplers on digital inputs, digital outputs, and the counter. Isochronous mode is supported for deterministic cycle-synchronized operation. A configuration package is included on CD.
Frequently Asked Questions
Q: What is the maximum counting frequency of the FM 350-1?
A: 500 kHz for the 5 V RS 422 differential input, and 200 kHz for the 24 V input.
Q: What is the weight and physical size of the 6ES7350-1AH03-0AE0?
A: Approximately 250 g, with dimensions of 40 mm width, 125 mm height, and 120 mm depth.
Q: What front connector does the module require?
A: One 20-pin front connector.
Field Installation Guidelines
Insert the module into an S7-300 rack and secure with the mounting screws. Wire the 20-pin front connector per the module pin assignment before energizing. Verify supply voltage at 1L+ and 2L+ is within 20.4 V to 28.8 VDC. Route encoder cables separate from high-current power conductors to preserve signal integrity at 500 kHz. Confirm the 5 V encoder supply load does not exceed 300 mA and the 24 V encoder supply load does not exceed 400 mA. Verify the encoder type and signal format match the configured counting mode before commissioning.
Ek Özellikler
Skaler (V/f)
Vektör
AC ile çalışan
Satın Alma Rehberi
- Sipariş vermeden önce kesin model, parça numarası ve teknik özellikleri doğrulayın.
- Mevcut makine veya kontrol sistemlerinizle uyumluluğu kontrol edin.
- Teknik destek için sale@etowonauto.com adresinden veya +8617859788089 numarasından iletişime geçin.
- Teslimat seçeneklerini, teslim sürelerini ve nakliye gereksinimlerini inceleyin.
- Kurulum sırasında üretici talimatlarını ve en iyi uygulamaları takip edin.
Gönderim ve İade
Stokta bulunan ürünler genellikle aynı iş günü içinde gönderilir. Şu anda stokta olmayan ürünler için gönderim süreleri, ürünün bulunabilirliğine göre değişiklik gösterebilir. Uluslararası gönderim mevcuttur ve gönderim ücretleri varış yeri, ağırlık ve taşıyıcı seçimine göre hesaplanır.
Ürünler kullanılmamış ve orijinal durumda olmak koşuluyla, teslim alındıktan sonraki 30 gün içinde iade kabul edilir. İade gönderim ücretleri müşteriye aittir. Lütfen herhangi bir ürünü iade etmeden önce iade onayı almak için bizimle iletişime geçin.
Daha fazla bilgi için lütfen Gönderim ve İade Politikamızı inceleyin.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Hızlı Gönderim
Orijinal endüstriyel otomasyon parçaları, dünya çapında hızlı gönderim için mevcuttur.
-
Kolay İade
Güvenilir satış sonrası koruma için 12 aylık garanti ile 30 gün iade desteği.
-
7/24 destek
Kararlı ve verimli operasyonların sürdürülmesine yardımcı olmak için duyarlı profesyonel destek.
-
Orijinal ve Gerçek
%100 orijinal, güvenilir endüstriyel otomasyon üreticilerinden doğrudan temin edilmiştir.
Teknik ve Satın Alma Rehberi
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
-
What CFC Rules Cut PCS7 Batch Abort Rates Fast?
This article presents enforceable CFC programming governance rules for Siemens PCS7 DCS batch plants, covering b...
-
What Makes the 1769-L3ER Ideal for Compact Skid Automation?
This guide explains how the Allen-Bradley 1769 CompactLogix L3ER bridges the gap between micro PLCs and large DC...
-
Why Do SIL3 Safety Interlocks Still Trip in Industrial Plants?
This article reviews Honeywell Safety Manager SIL3 SIS architecture, wiring and cabinet installation rules, PFDa...
-
How Does Poor Grounding Cause 4-20mA Signal Drift?
This guide explains how MTL signal isolators fail through distortion, drift and EMI in PLC and DCS loops, then d...
