IC755ACCBATTNL | Quickpanel Backup Battery 512KB SRAM GE

Product Overview

The GE Fanuc IC755ACCBATTNL replacement battery pack provides backup power for 10-inch, 12-inch, and 15-inch Quickpanel+ industrial operator terminals. This lithium coin cell maintains the 512KB battery-backed SRAM, preserving critical configuration data during power interruptions. Use only this pack for battery replacement on these Quickpanel+ units.

Core Functionality

The IC755ACCBATTNL supplies continuous power to the SRAM when the terminal is disconnected from main power. This ensures retention of application programs, screen configurations, and historical data. The lithium coin cell offers long shelf life and stable voltage output. Replacement is required when the battery degrades from repeated charge/discharge cycles and can no longer sustain data retention for the appropriate duration.

Technical Specifications

Installation Guide

Perform replacement only in a non-hazardous location with trained personnel. Remove the 7 screws securing the back cover. Gently press on either side of the tab to release the cover, then lift it upward. Locate the coin cell battery and note its polarity. Remove the old battery and install the new one with correct orientation. Replace the back cover and tighten screws to secure. Dispose of faulty batteries per local and state regulations.

Safety Instructions

Lithium coin batteries present fire and explosion risks if mishandled. Do not crush, disassemble, short-circuit, or incinerate the battery. Store in a cool, dry location away from conductive materials. Replace only with the IC755ACCBATTNL pack – using alternative batteries may cause damage or data loss. Faulty batteries must be recycled through approved collection programs.

Engineering Advantages

This genuine GE Fanuc battery pack ensures reliable data retention for Quickpanel+ SRAM memory. The lithium coin cell delivers stable voltage over extended periods, minimizing the risk of configuration loss. The pack is specifically validated for 10, 12, and 15-inch terminals, eliminating compatibility concerns. The straightforward coin-cell design simplifies field replacement with basic tools and minimal downtime.

Technical FAQs

Q1: How do I know when the battery needs replacement?
A1: The Quickpanel+ displays a low-battery warning message. Data loss or configuration corruption upon power cycling also indicates the battery requires replacement.

Q2: Can I use a third-party battery instead of IC755ACCBATTNL?
A2: No. GE Fanuc specifies that only the IC755ACCBATTNL pack should be used. Third-party batteries may have incorrect voltage, polarity, or form factor causing damage.

Q3: Is the battery replacement hot-swappable?
A3: No. The terminal must be powered off and disconnected from main power before opening the back cover and replacing the battery.