IC670ALG310 Analog Voltage Output Module - GE Fanuc

GE Fanuc IC670ALG310: Analog Voltage Output Module

Author: Etowon Auto

The GE Fanuc IC670ALG310 delivers precise voltage signals for control systems. This 8-channel module outputs ±10 volts with high accuracy. It is designed for the Rx7i PACsystem platform. 

Core Specifications

• Model: IC670ALG310 Analog Voltage Output Module
• Series: GE Fanuc Rx7i PACsystem
• Channels: 8 configurable voltage outputs
• Voltage Range: -10 to +10 Volts output
• Weight: Approximately 0.3 kg (0.66 lbs)

Signal Performance & Accuracy

• Resolution: 14-bit for precise control
• Accuracy: Within 0.05% of full scale
• Ripple/Noise: Less than 5 mV RMS
• Temp Drift: ±25 ppm/°C controlled
• Over/Under Range: ±50 mV detection
• Conversion Time: 2 ms per channel typical

Electrical & Power

• Bus Current: 170 mA draw from bus
• Power Loss Detection: Yes, with user monitoring
• Calibration Monitor: Built-in uncalibrated detection
• Data Capacity: Up to 8 words analog output data

Physical & Environmental

• Weight: Approx. 0.3 kg (0.66 lbs) module weight
• Width: 130 mm compact form factor
• Operating Temp: 0 to 60°C guaranteed range
• Storage Temp: -40 to +85°C extended range
• MTBF: Over 200,000 hours reliability

Configuration & Control

• Channel Control: Individual active/inactive config
• Default Output: Supports zero or default value
• Status Feedback: 0 to 3 bytes channel/module status
• Alarm Control: 0 to 2 bytes alarm clearing
• Magnitude Data: 14 bits data size

Package Contents

• One (1) IC670ALG310 Voltage Output Module (0.3 kg)
• Configuration and installation documentation
• (Note: Requires compatible Rx7i PACsystem backplane)

Installation Guide

• Install in compatible Rx7i PACsystem backplane
• Configure each channel as active with ±10V range
• Set local default output values as needed
• Enable power loss detection for system safety
• Monitor calibration status via system software

Shipping Information

• Shipping weight: ~0.3 kg module + protective packaging
• FedEx, UPS, DHL shipping services available
• ESD-safe packaging for electronic protection

FAQ

What is the output voltage range?

• The IC670ALG310 provides eight channels with -10 to +10 Volts output range and ±50 mV over/under range detection.

What is the resolution and accuracy?

• It offers 14-bit resolution with accuracy within 0.05% of full scale and less than 5 mV RMS ripple/noise.

How many channels can be controlled independently?

• All 8 channels are individually configurable as active or inactive, with support for local default output values.

Content by Etowon Auto.