GE Fanuc Series 90-30 IC693CBL303 Backplane Connection Cable

Product Overview

The GE Fanuc IC693CBL303 is a rugged, industrial-grade expansion backplane cable designed specifically for the Series 90-30 PLC system. Measuring 6 feet (2 meters) in length, this cable is engineered to establish reliable, high-speed communication between a Series 90-30 CPU baseplate and an expansion or remote I/O baseplate. Fitted with 15-pin male D-subminiature connectors at both ends, heavy-duty AMP connector shells, and a complete metric mounting hardware kit, it ensures robust and secure signal transmission in demanding industrial environments.

Key Advantages

• Reliable Data Transmission: Built with high-quality #24 AWG (0.22 mm²) wiring to maintain exceptional signal integrity and prevent data drops between baseplates.
• Secure Mechanical Connection: Outfitted with premium AMP 207470-1 connector hoods and an AMP 207871-1 hardware kit (including metric screws and retaining clips) to lock the connections tightly against industrial vibration.
• Plug-and-Play Integration: Designed specifically for GE Fanuc Series 90-30 architectures, allowing immediate system expansion with zero manual pinning or field termination required.
• Lightweight and Flexible: Weighing only 0.2 kg, this cable easily routes through dense wire ducts and tight cabinet spaces without putting physical stress on the backplane ports.

Technical Specifications

Quick Installation Tips

• Power Down First: Always power off the PLC system and baseplates before connecting or disconnecting the IC693CBL303 cable to avoid electrical arcs or potential damage to the I/O modules.
• Secure the Mounting Screws: Utilize the included AMP 207871-1 hardware kit to anchor both 15-pin connectors to the baseplates. Hand-tighten the metric screws snugly to ensure consistent ground contact and resist vibration-induced loosening.
• Observe Bend Radius Limits: Avoid routing the cable with sharp, 90-degree folds. Maintain a gentle bend radius to prevent internal wire strain within the #24 AWG copper cores.

Technical FAQs

Q1: What is the maximum distance I can chain GE Fanuc Series 90-30 baseplates using these cables?

A1: The maximum total cumulative length of all expansion cables connected in a single PLC expansion system must not exceed 50 feet (15 meters). This 6-foot (2-meter) cable easily fits within that overall restriction.

Q2: Can I use this cable to connect an Expansion Baseplate as well as a Remote Baseplate?

A2: Yes, the IC693CBL303 is compatible with both Expansion and Remote systems. However, keep in mind that Remote Baseplates (which can be up to 700 feet away) require high-isolation converters, while local expansion chains simply use this standard copper cable directly.

Q3: Does this cable package include the hardware needed to secure the D-sub connectors?

A3: Yes. The cable comes complete with the AMP 207871-1 hardware kit, which includes 2 metric screws and 2 screw clips to lock both 15-pin connectors firmly into place on the baseplate connectors.