Pular para o conteúdo
Peças de automação, fornecimento mundial
Pular para as informações do produto
1 de 3

SKU:V18345-1010221001

ABB V18345-1010221001 Valve Positioner | Original Stock

Em estoque (25 unidades), pronto para envio
  • Manufacturer: ABB

  • Product No.: V18345-1010221001

  • Product Type: Valve Positioner Module

  • Product Origin: Sweden

  • Payment:T/T, Western Union

  • Weight: 1700g

  • Shipping port: Xiamen

  • Warranty: 12 months

Política de Devolução em 30 Dias · Garantia de 12 Meses
  • Entrega Rápida
  • Suporte 24 horas por dia, 7 dias por semana
  • Garantia de Qualidade

Descrição

ABB V18345-1010221001 Valve Positioner

The V18345-1010221001 (also cataloged as the V18345 Valve Positioner) is a TZIDC-120 intelligent positioner in a varnished aluminium case rated IP 65 (NEMA 4X). It accepts a 4-20 mA two-wire input and provides single-acting, fail-freeze output for linear actuators to DIN/IEC 534 / NAMUR or rotary actuators to VDI/VDE 3845. Unit weight is 1.7 kg.

Hardware Specifications

Parameter Specification
Model V18345-1010221001
Brand ABB
Product Type Valve Positioner (TZIDC-120)
Enclosure Aluminium, varnished, IP 65 (NEMA 4X)
Weight 1.7 kg
Input Signal 4-20 mA, two-wire
Input Limit Max. 25 mA / 30 V
Impedance at 20 mA 435 ohms
Output Range 0 to 6 bar (0 to 90 psi)
Air Capacity at 6 bar 13 kg/h = 10 Nm3/h = 6.0 scfm
Output Function Single acting, fail freeze
Pneumatic Connections Air pipe: Thread 1/4-18 NPT
Electrical Connections Cable: Thread 1/2-14 NPT
Position Feedback Plug-in analog module, 4-20 mA
Explosion Protection Without

Electropneumatic Control Characteristics

The V18345 positioner uses two-wire technology with a nominal 4-20 mA range and supports split range configuration between 20 % and 100 % of nominal range. Minimum operating current is 3.4 mA without analog position feedback and 3.5 mA with the feedback module installed; start-up is from 3.8 mA. Load voltage at 20 mA is 8.7 V DC with a 435 ohm input impedance. A digital input accepts 24 V DC (12-30 V DC), with 0-10 V DC interpreted as logical 0 and 12-30 V DC as logical 1, drawing a maximum of 4 mA. The digital output follows the DIN 19234/NAMUR control circuit at 5-11 V DC, with less than 1.0 mA as logical 0 and greater than 2.0 mA as logical 1. Pneumatic output spans 0 to 6 bar (0 to 90 psi); air capacity at a 6 bar supply is 13 kg/h (10 Nm3/h, 6.0 scfm). Shut-off values are adjustable to 0-45 % at end position 0 % and 55-100 % at end position 100 %. The unit weighs 1.7 kg.

Field Installation Guidelines

Mount the positioner to a linear actuator per DIN/IEC 534 / NAMUR or to a rotary actuator per VDI/VDE 3845 using the mechanical kit. Verify the varnished aluminium case remains sealed to maintain IP 65 (NEMA 4X) integrity. Confirm the 1.7 kg unit is supported by the actuator mounting bracket during installation. Connect the 4-20 mA two-wire input through the 1/2-14 NPT cable entry and the air supply through the 1/4-18 NPT air pipe port. Confirm supply air is dry and oil-free at or below 6 bar before pressurizing. Route signal wiring separately from AC power conductors. Set the split range and fail-freeze action in configuration before placing the loop in service. Verify shut-off values at both end positions after commissioning.

Frequently Asked Questions

Q: What is the input signal and impedance of the V18345-1010221001?
A: 4-20 mA two-wire input with 435 ohms impedance at 20 mA.

Q: What is the fail-safe action of this configuration?
A: Single acting, fail freeze.

Q: What are the pneumatic and electrical connection thread sizes?
A: Air pipe: 1/4-18 NPT; cable: 1/2-14 NPT.

Product Resources

📄 Download PDF
  • Prata

Escalar (V/f)

Vetor

Alimentado por corrente alternada

  • Confirme o modelo exato, número da peça e especificações antes de fazer o pedido.
  • Garanta a compatibilidade com sua máquina ou sistemas de controle atuais.
  • Entre em contato pelo sale@etowonauto.com ou pelo +8617859788089 para assistência técnica.
  • Verifique as opções de entrega, prazos e requisitos de envio.
  • Siga as instruções do fabricante e as melhores práticas durante a instalação.

Itens em estoque geralmente são despachados no mesmo dia útil. Para produtos que não estão disponíveis no momento, os prazos de despacho podem variar conforme a disponibilidade. O envio internacional está disponível, e os custos de envio são calculados de acordo com o destino, peso e transportadora escolhida.

Devoluções são aceitas dentro de 30 dias após o recebimento, desde que os itens estejam sem uso e em condição original. Os custos de envio para devolução são de responsabilidade do cliente. Por favor, entre em contato conosco antes de devolver qualquer item para receber a autorização de devolução.

Para mais detalhes, por favor, consulte nossa Política de Envio e Devolução.

Ver informações completas

GARANTA DESEMPENHO CONFIÁVEL DAS MÁQUINAS

Transforme sua casa com as mais recentes soluções multi-eletrônicas, desde iluminação inteligente até dispositivos controlados por voz — tudo projetado para tornar a vida mais fácil, segura e conectada. Otimize suas operações com o Sistema de Monitoramento Bently Nevada 3500, que oferece monitoramento em tempo real de vibração e condição das máquinas para prevenir falhas e maximizar o tempo de atividade.