Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.
SKU:V18345-1010520001
Valve Positioner ABB V18345-1010520001
Manufacturer: ABB
Product No.: V18345-1010520001
Product Type: Valve Positioner Module
Product Origin: Sweden
Payment:T/T, Western Union
Weight: 1700g
Shipping port: Xiamen
Warranty: 12 months
Kongsi
- Penghantaran Pantas
- Sokongan 24/7
- Jaminan Kualiti
Penerangan
Product Overview
ABB V18345-1010520001 is an electro-pneumatic valve positioner from the TZIDC series, built for precise control of pneumatic actuators on large rotary machinery. It converts a 4–20 mA control signal into a proportional air output, achieving 0.5% linearity and ±0.2% repeatability. The non-contact position sensor eliminates mechanical wear, delivering stable performance in turbine, compressor, and process valve applications.
Technical Configuration
Core Hardware
The positioner uses a piezoresistive pressure sensor for air output feedback and a Hall-effect sensor for valve stem position. The HART protocol enables remote calibration and diagnostics without breaking the air loop. A local LCD and push-buttons allow on-site setup, zero/span adjustment, and fault readout.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Signal | 4–20 mA (HART) |
| Air Supply | 1.4–6.0 bar |
| Air Consumption | ≤0.03 kg/h (steady state) |
| Linearity | ±0.5% of span |
| Repeatability | ±0.2% of span |
| Operating Temperature | -40°C to +80°C |
| Protection Class | IP65 |
| Pneumatic Ports | 1/4" NPT |
| Electrical Entry | M20×1.5 |
| Housing Material | Aluminum, powder-coated |
| Weight | Approx. 1.7 kg |
Installation Guide
Mount the positioner rigidly on the actuator yoke and verify the feedback lever travels 0–100% without binding. Set the air supply to 1.4 bar minimum; below this, the output may not reach full stroke. Keep cable bend radius above 50 mm and route signal wiring away from VFD cables. For explosive atmospheres, confirm the certification label matches the zone classification before energizing.
Engineering Advantages
The TZIDC platform tolerates supply air contaminated with oil and dust, reducing downtime in dirty plant environments. The aluminum housing resists corrosion in coastal and chemical plants. HART diagnostics report valve signature data, helping maintenance teams plan repairs before a trip occurs. The unit drops into existing 4–20 mA loops without extra wiring.
Technical FAQs
Q1: How do I verify the positioner is calibrated correctly?
A1: Apply 4 mA and confirm the valve reaches 0% stroke; apply 20 mA and confirm 100%. Check the LCD readout matches the actual stem position within ±0.5%.
Q2: What does the 1010520001 suffix indicate?
A2: It defines the analog HART input, double-acting output, IP65 aluminum housing, and standard temperature range. Confirm against the nameplate before ordering spares.
Q3: Can this unit replace an older TZIDC positioner?
A3: Yes, it shares the same mounting footprint and 4–20 mA interface. Verify the pneumatic port size and cable entry match the existing installation.
Spesifikasi Tambahan
- Perak
Skalar (V/f)
Vektor
Dikuasakan oleh AC
Panduan Membeli
- Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
- Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
- Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
- Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
- Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.
Penghantaran dan Pemulangan
Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.
Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.
Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Penghantaran Pantas
Alat ganti automasi industri asli tersedia untuk penghantaran segera ke seluruh dunia.
-
Pemulangan Mudah
Sokongan pemulangan selama 30 hari dengan jaminan 12 bulan untuk perlindungan selepas jualan yang boleh dipercayai.
-
Sokongan 24/7
Sokongan profesional responsif untuk membantu mengekalkan operasi yang stabil dan cekap.
-
Asli & Tulen
100% asli, diperoleh terus dari pengeluar automasi industri yang dipercayai.
Panduan Teknikal & Pembelian
-
When Should You Replace a Yokogawa Analog IO Card?
This article breaks down Yokogawa analog AI/AO card calibration tolerances, drift aging benchmarks, and formal replac...
-
What Performance Gains Does S7-1500 Offer Over Legacy S7 PLCs?
Legacy Siemens S7-300 and S7-400 PLCs face spare-part shortages, rising failure rates and limited network capability,...
-
What Logic Changes Cut SIS False Trips by 94%?
This article examines practical logic modification and parameter tuning methods for ABB 800xA HI SIL3 safety ins...
-
Why Do FTE Redundancy Failovers Lock Up in DCS?
Honeywell FTE delivers sub-500 ms failover for Experion PKS, yet field records show 38% of outages stem from installa...
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
