Bahagian automasi, bekalan seluruh dunia
0
  • 330101-00-28-90-02-00
  • 330101-00-28-90-02-00-1
  • 330101-00-28-90-02-00-2
1 3

330101-00-28-90-02-00

Original Bently Nevada 330101-00-28-90-02-00 8mm Probe

Stok ada (21 unit), sedia untuk dihantar

  • Manufacturer: Bently Nevada

  • Product No.: 330101-00-28-90-02-00

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 450g

  • Shipping port: Xiamen

  • Warranty: 12 months

Polisi Pemulangan 30 Hari · Jaminan 12 Bulan
  • Penghantaran Pantas
  • Sokongan 24/7
  • Jaminan Kualiti

Penerangan

Product Overview

The Bently Nevada 330101-00-28-90-02-00 is a high-performance 3300 XL Series 8 mm eddy current proximity probe designed for continuous shaft vibration, thrust position, and speed monitoring in critical machinery. Featuring a 3/8-24 UNF fully-threaded body with 0.0 inches unthreaded length and a 2.8-inch (71 mm) overall case length, this sensor is built with an integrated 9.0-meter (29.5 feet) standard coaxial cable terminated with a miniature coaxial ClickLoc™ connector and connector protector. Manufactured with an impact-resistant Polyphenylene sulfide (PPS) tip, TipLoc™ tip-molding, CableLoc™ 330 N cable retention, and an AISI 304 stainless steel case, the assembly has an approximate net hardware weight of 0.45 kg (0.99 lbs). It operates reliably across severe temperature conditions from -51°C to +177°C (-60°F to +351°F) and provides full interchangeability without individual system recalibration.

Technical Specifications

Parameter Specification Details
Manufacturer Bently Nevada
Part Number 330101-00-28-90-02-00
Product Line 3300 XL 8 mm Proximity Transducer System
Thread & Casing Dimensions 3/8-24 UNF thread / 0.0 in unthreaded / 2.8 in overall case length
Total Cable Length 9.0 meters (29.5 feet) nominal
Connector & Approval Profile Miniature coaxial ClickLoc™ connector with protector / No agency approvals
Linear Range & Scale Factor 2.0 mm (80 mils) linear range / 7.87 V/mm (200 mV/mil) ISF
Recommended Target Gap 1.0 mm (40 mils) corresponding to -10 Vdc bias output
Probe DC Resistance 12.6 Ω ± 0.8 Ω (Center to outer conductor for 9.0m cable)
Cable Capacitance & Construction 69.9 pF/m typical / FEP insulated 75 Ω coaxial cable
Operating Temperature Range -51°C to +177°C (-60°F to +351°F)
Component Net Weight Approx. 0.45 kg (0.99 lbs)

Installation & Torque Guidelines

Mechanical Installation: Thread the probe into a tapped 3/8-24 UNF housing opening. Apply the recommended installation torque of 7.3 N•m (65 in•lb), taking care not to exceed the maximum rated torque limit of 12.5 N•m (110 in•lb). Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal coaxial conductor fatigue.
Gap Calibration & Connection: Set the initial probe gap to 1.0 mm (40 mils) from the shaft target to establish the nominal -10 Vdc voltage center point. Fasten the ClickLoc connector finger-tight (do not exceed 0.56 N•m / 5 in•lb) and secure the protective sleeve to prevent environmental corrosion and mechanical disengagement.

Technical FAQs

Q1: What does the -90- option code signify in the part number?

A1: The "90" code indicates a 9.0-meter (29.5 feet) total length configuration, allowing direct connection to a 9.0m 3300 XL Proximitor Sensor without an extension cable.

Q2: What is the recommended gap distance for setting probe bias voltage?

A2: The recommended gap is 1.0 mm (40 mils), which yields an approximate -10 Vdc output centered in the 2.0 mm (80 mil) linear operating range.

Q3: What is the maximum field wiring length supported back to the monitoring rack?

A3: Field wiring using 3-conductor shielded triad cable can extend up to 305 meters (1,000 feet) between the 3300 XL Proximitor sensor and the monitor rack.

Commercial Contact Email: sale@etowonauto.com

Product Resources

📄 Download PDF
🏷️ Tags: 3300 XL 8 mm Probe Proximity Probe

Skalar (V/f)

Vektor

Dikuasakan oleh AC
  • Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
  • Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
  • Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
  • Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
  • Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.

Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.

Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.

Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

 Lihat Butiran Produk

PASTIKAN PRESTASI MESIN YANG BOLEH DIPERCAYAI

Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.

Beli sekarang
Nasihat teknikal langkah demi langkah dan petua pembelian untuk bahagian automasi industri.

Panduan Teknikal & Pembelian

Lihat semua blog