Bahagian automasi, bekalan seluruh dunia
0
  • IC693CPU352-1
  • IC693CPU352-2
1 3

IC693CPU352

IC693CPU352 GE Fanuc 90-30 PLC Processor 25MHz 240KB

Stok ada (11 unit), sedia untuk dihantar

  • Manufacturer: General Electric

  • Product No.: IC693CPU352

  • Product Type: CPU Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 300g

  • Shipping port: Xiamen

  • Warranty: 12 months

Polisi Pemulangan 30 Hari · Jaminan 12 Bulan
  • Penghantaran Pantas
  • Sokongan 24/7
  • Jaminan Kualiti

Penerangan

Technical Specifications

Part Number IC693CPU352
Product Type Single-Slot Modular CPU Processor
Brand / Manufacturer GE Fanuc (Emerson)
Product Series Series 90-30 PLC
Processor Architecture Intel 80386EX / 25 MHz Clock Speed
User Memory Capacity 240 Kbytes (Firmware Release 9.0+) / 80 Kbytes (Pre-Release 9.0)
Typical Scan Rate 0.22 milliseconds per 1K of Boolean logic
Floating Point Math Yes (Hardware-based via integrated math co-processor)
Discrete Input/Output 2048 %I Discrete Inputs / 2048 %Q Discrete Outputs
Analog Inputs/Outputs Up to 32,640 %AI Words / Up to 32,640 %AQ Words
Onboard Communication 3 Serial Ports (Power Supply Connector: SNP/SNP-X Slave; Port 1 & 2: RTU Slave, SNP/SNP-X Master/Slave)
Chassis Expansion Supports up to 7 local expansion baseplates and 7 remote I/O baseplates
Current Consumption 910 mA @ 5 V DC backplane draw (0 mA from +12 V DC)
Thermal Dissipation 4.55 Watts
Operating Temperature 0°C to 60°C (32°F to 140°F)
Net Product Weight 0.30 kg (Approx. 0.66 lbs)

Product Overview

The GE Fanuc IC693CPU352 is a high-performance, single-slot modular CPU processor for the legacy Series 90-30 Programmable Logic Controller (PLC) family. Weighing approximately 0.30 kg (0.66 lbs), this compact module slots directly into the CPU baseplate to coordinate complex industrial processes. Driven by an Intel 80386EX 25 MHz processor with a built-in mathematical co-processor, it handles complex floating-point mathematical computations locally to deliver precise, fractional-value process control. Modernized with up to 240 KB of flash user memory on firmware version 9.0 or later, it easily scales to manage massive multi-rack layouts of up to seven local expansion racks and seven remote I/O racks.

Core Technical Advantages

  • Hardware-Based Floating Point Calculations: An onboard mathematical co-processor processes decimal or fractional values locally, optimizing PID loops for HMI/SCADA configurations without stalling the main execution cycle.
  • Substantial Logical Scalability: Manages up to 2048 discrete input/output points and up to 32,640 analog registry words to supervise large, complex machinery lines.
  • Dense Three-Port Connectivity: Provides native SNP, SNP-X, and Modbus RTU slave messaging natively over three communication points (including a dedicated RJ45 Port 1 and a 9-pin D-sub Port 2) without taking up valuable rack space.
  • Lightweight Rack Layout: At only 0.30 kg (0.66 lbs), this module inserts into standard backplane slots with a minimal physical profile, drawing a highly efficient 910 mA at 5 V DC and outputting a modest 4.55 Watts of heat.

Installation Guide

Ensure backplane power is fully deactivated before mounting the 0.30 kg module into the single dedicated CPU slot of your master baseplate. Align the rear connector pins and push firmly until the top and bottom industrial plastic retaining clips click into locked positions. Set the physical key-switch located on the front bezel of the IC693CPU352 to "Stop" before powering the system. Connect your programming interface to RJ45 Port 1 to upload or configure your system variables using Proficy Machine Edition, VersaPro, or LogixMaster 90-30 programming software. Once successfully configured, toggle the key-switch to "Run" to initiate the active logic loop.

Technical FAQs

Q1: Why is the user program memory listed as both 80 Kbytes and 240 Kbytes?
A1: The onboard user memory is directly dependent on your CPU's firmware level. Modules running legacy firmware versions older than Release 9.0 are limited to 80 KB of program space, whereas firmware Release 9.0 or higher unlocks the full 240 KB allocation.

Q2: Can this CPU run as a Modbus RTU Master natively?
A2: No. Out-of-the-box, the serial ports on the IC693CPU352 support Modbus RTU Slave and SNP/SNP-X protocols. If your network topology requires Modbus RTU Master or dedicated CMM communication, you must install an auxiliary PCM or CMM module in an adjacent slot.

Q3: How much load does this 0.30 kg module place on the backplane power supply?
A3: The IC693CPU352 CPU draws 910 mA from the internal 5 V DC logic rail provided by your 90-30 power supply. It places no power draw on the secondary 12 V DC power supply lines.

🏷️ Tags: CPU Module

Skalar (V/f)

Vektor

Dikuasakan oleh AC
  • Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
  • Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
  • Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
  • Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
  • Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.

Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.

Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.

Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

 Lihat Butiran Produk

PASTIKAN PRESTASI MESIN YANG BOLEH DIPERCAYAI

Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.

Beli sekarang
Nasihat teknikal langkah demi langkah dan petua pembelian untuk bahagian automasi industri.

Panduan Teknikal & Pembelian

Lihat semua blog