Bahagian automasi, bekalan seluruh dunia
0
  • IC693BEM333
  • IC693BEM333-1
  • IC693BEM333-2
1 3

IC693BEM333

IC693BEM333 GE Fanuc 1MHz Dual-Port Remote FIP Module

Stok ada (13 unit), sedia untuk dihantar

  • Manufacturer: General Electric

  • Product No.: IC693BEM333

  • Product Type: Interface Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 270g

  • Shipping port: Xiamen

  • Warranty: 12 months

Polisi Pemulangan 30 Hari · Jaminan 12 Bulan
  • Penghantaran Pantas
  • Sokongan 24/7
  • Jaminan Kualiti

Penerangan

Product Overview

The GE Fanuc IC693BEM333 is a specialized Remote FIP (Factory Instrumentation Protocol) Bus Expansion Interface Module designed for the GE Series 90-30 Programmable Logic Controller (PLC) architecture. Operating as a high-speed fieldbus communication gateway, this module provides seamless deterministic data exchange across industrial networks at a transmission speed of 1 MHz.

Equipped with dual 9-pin D-type serial ports, the IC693BEM333 supports redundant or multi-drop FIP network topologies across maximum segment lengths of up to 100 meters per port. Weighing approximately 0.27 kg (0.60 lbs), this IP20-rated module operates directly off the Series 90-30 backplane power supply, features 4 real-time diagnostic LEDs (CD1, TEN1, CD2, TEN2), and installs into any available I/O slot in a Series 90-30 chassis (excluding Slot 1, which is dedicated to the CPU).

Core Technical Advantages

  • Dual-Port FIP Communication: Features 2 x 9-pin D-type connectors supporting 1 MHz high-speed deterministic Factory Instrumentation Protocol (FIP) networking.
  • Comprehensive Diagnostics: Built-in front panel LED array (CD1, TEN1, CD2, TEN2) provides immediate visual feedback for carrier detect and transmit enable status across both channels.
  • Flexible Chassis Installation: Mounts into any open slot of a standard Series 90-30 baseplate (Slots 2 through 10) for direct backplane power and bus communication.
  • Industrial Thermal Resilience: Engineered to operate reliably in control panel enclosures from 0°C to +60°C (32°F to 140°F) under standard IP20 environmental protections.

Technical Specifications

Parameter Specification Details
Brand / Manufacturer GE Fanuc Automation
Full Catalog Part Number IC693BEM333
Module Function Bus Expansion Module (Remote FIP Interface)
System Compatibility Series 90-30 PLCs (Not supported on PACSystems RX3i)
Communication Protocol Factory Instrumentation Protocol (FIP)
Transmission Rate 1 MHz
Serial Port Interfaces 2 x 9-Pin Sub-D Female Connectors
Maximum Cable Distance 100 meters (328 feet) per port segment
Net Module Weight 0.27 kg (0.60 lbs)
Chassis Slot Location Any baseplate slot except Slot 1 (reserved for CPU)
Power Source Internal power supplied via Series 90-30 backplane bus
Diagnostic Status Indicators 4 LEDs (CD1, TEN1, CD2, TEN2)
Ingress Protection Rating IP20 (requires indoor control enclosure)
Operating Temperature Range 0°C to +60°C (32°F to 140°F)
Storage Temperature Range -40°C to +85°C (-40°F to 185°F)

Installation & Gap Calibration Guide

  • Chassis Slot Mounting: Align the module with the card guides in any Series 90-30 chassis slot (except Slot 1) and press firmly until seated on the backplane.
  • Port Wiring & Distance Limits: Connect 9-pin Sub-D FIP network cables to Ports 1 and 2, keeping each cable segment under the 100-meter maximum length rule.
  • Enclosure Protection: Install the chassis in an IP54 or NEMA-rated enclosure to shield the IP20-rated module from moisture, airborne dust, and conductive oil mist.

Technical FAQs

Q1: What does model designation IC693BEM333 represent?
A1: GE Series 90-30 Bus Expansion Module (BEM) equipped with a 1MHz dual-port Remote FIP interface. (93 chars)

Q2: Can the IC693BEM333 module be used in a PACSystems RX3i rack?
A2: No, it is specifically designed for Series 90-30 baseplates and is not compatible with RX3i systems. (96 chars)

Q3: Which slot should I install the IC693BEM333 into?
A3: It can be placed in any open Series 90-30 baseplate slot except Slot 1, which is reserved for the CPU. (97 chars)

Product Resources

📄 Download PDF
🏷️ Tags: Interface Module

Skalar (V/f)

Vektor

Dikuasakan oleh AC
  • Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
  • Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
  • Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
  • Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
  • Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.

Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.

Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.

Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

 Lihat Butiran Produk

PASTIKAN PRESTASI MESIN YANG BOLEH DIPERCAYAI

Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.

Beli sekarang
Nasihat teknikal langkah demi langkah dan petua pembelian untuk bahagian automasi industri.

Panduan Teknikal & Pembelian

Lihat semua blog