Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.
SKU:IC670MDL740
IC670MDL740 GE Fanuc 24VDC 0.5A Logic Output Module
Manufacturer: General Electric
Product No.: IC670MDL740
Product Type: Positive Logic Output Module
Product Origin: USA
Payment:T/T, Western Union
Weight: 910g
Shipping port: Xiamen
Warranty: 12 months
Kongsi
- Penghantaran Pantas
- Sokongan 24/7
- Jaminan Kualiti
Penerangan
GE Fanuc IC670MDL740 Field Control 16-Point Discrete Output Module
The GE Fanuc IC670MDL740 is a high-reliability 16-point positive logic (sourcing) discrete output module from the Field Control series. Engineered to operate along a Bus Interface Unit (BIU) for versatile expansion I/O setups, it provides 16 discrete channels delivering 12/24 VDC nominal (9.2–29.5 VDC range) at 0.5 Amps per point (4 Amps maximum per module). Weighing approximately 2 pounds (0.91 kg), this module is ideal for powering low-current industrial loads like pilot lamps, solenoids, and relay coils. It features per-point LED status indication, integrated 5A group fuse protection with fault diagnostics, 1500 VAC isolation, and a 25-terminal integrated terminal block.
Technical Specifications
| Brand / Series | GE Fanuc / Field Control |
| Part Number | IC670MDL740 |
| Module Type & Logic | Discrete Output Module | Positive Logic (Sourcing) |
| Outputs & Grouping | 16 Channels | 1 Single Group |
| Output Voltage Range | 10–30 VDC (24 VDC Nominal) | Operational Range: 9.2–29.5 VDC |
| Current Output Rating | 0.5 A per point | 4.0 A maximum per module (1 mA min load) |
| Inrush Current & Voltage Drop | 2.0 A max for 100 ms | Output Drop: 0.5 V maximum |
| BIU Current Draw | 111 mA maximum from BIU Power Supply |
| Isolation Voltage | 1500 VAC for 1 minute (User Input to Logic / Frame Ground) |
| Protection & Diagnostics | 5A Slow-Blow Group Fuse | Low Voltage (<9.8 VDC) & Blown Fuse LEDs |
| Terminal Block & Wire Size | 25 Terminals | AWG #14 to #22 (Single) / AWG #18 (Two wires) |
| Shipping Weight | 2 lbs (approx. 0.91 kg) |
Quick Installation Guide
- Mount the IC670MDL740 directly onto the designated Field Control I/O base connected to the Bus Interface Unit (BIU).
- Wire loads to the 25-position terminal block using AWG #14–#22 field wiring; verify correct 24 VDC polarity to avoid blowing the protective fuse.
- Ensure an appropriately rated 5A, 250 VAC slow-blow fuse is installed in the internal fuse holder for output group protection.
Technical FAQs
Q1: What is the current switching capability of the IC670MDL740 per channel?
A1: Each output point supplies up to 0.5 Amps at 10–30 VDC, with a total module load limit of 4.0 Amps.
Q2: How does the module indicate fuse faults or power errors?
A2: Dedicated LED indicators signal a blown fuse or user supply voltage drop below 9.8 VDC, while diagnostic messages are transmitted to the BIU.
Q3: What type of replacement fuse is recommended for this output module?
A3: Use a 5 Amp, 250 VAC slow-blow type fuse designed for group short-circuit and reverse-polarity protection.
Spesifikasi Tambahan
Skalar (V/f)
Vektor
Dikuasakan oleh AC
Panduan Membeli
- Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
- Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
- Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
- Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
- Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.
Penghantaran dan Pemulangan
Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.
Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.
Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Penghantaran Pantas
Alat ganti automasi industri asli tersedia untuk penghantaran segera ke seluruh dunia.
-
Pemulangan Mudah
Sokongan pemulangan selama 30 hari dengan jaminan 12 bulan untuk perlindungan selepas jualan yang boleh dipercayai.
-
Sokongan 24/7
Sokongan profesional responsif untuk membantu mengekalkan operasi yang stabil dan cekap.
-
Asli & Tulen
100% asli, diperoleh terus dari pengeluar automasi industri yang dipercayai.
Panduan Teknikal & Pembelian
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
-
What CFC Rules Cut PCS7 Batch Abort Rates Fast?
This article presents enforceable CFC programming governance rules for Siemens PCS7 DCS batch plants, covering b...
-
What Makes the 1769-L3ER Ideal for Compact Skid Automation?
This guide explains how the Allen-Bradley 1769 CompactLogix L3ER bridges the gap between micro PLCs and large DC...
-
Why Do SIL3 Safety Interlocks Still Trip in Industrial Plants?
This article reviews Honeywell Safety Manager SIL3 SIS architecture, wiring and cabinet installation rules, PFDa...
-
How Does Poor Grounding Cause 4-20mA Signal Drift?
This guide explains how MTL signal isolators fail through distortion, drift and EMI in PLC and DCS loops, then d...
