IC200PNS002 Versamax PNS Module | GE Fanuc PROFINET IO

GE Fanuc IC200PNS002 Versamax PROFINET Scanner (PNS) Module

The GE Fanuc IC200PNS002 is a PROFINET scanner module for the Versamax series. It enables high-speed industrial network communication via dual fiber optic ports.

Technical Specifications

• Brand & Model: GE Fanuc IC200PNS002
• Series: Versamax PROFINET Scanner (PNS) Module
• PROFINET Standard: Version 2.2, Class A IO-Device
• Ports: Two 100 Mbps SC-Duplex Multi-Mode Fiber (MMF)
• I/O Update Rate: Configurable from 1ms to 512ms
• Power Requirement: 1.10 Amps at 5V DC (5 Watts)
• Operating Temperature: 0 to 60°C (without fan)
• Dimensions: 132 mm H x 134 mm W (5.2 x 5.28 in)

Compatibility & Requirements

• Software: Requires Proficy Machine Edition Version 7.0 or later
• Controller: Must be used with an RX3i PLC CPU (firmware 7.0+)
• LED Indicators: PWR1, PWR2, OK, FAULT, CONNECT, LAN for status monitoring
• Normal Operation: OK LED solid green, CONNECT LED solid green when linked

Status Indicators (LEDs)

• PWR1/PWR2: Solid green = power on
• OK LED: Solid green = normal; Off/Flashing = fault; Flashing amber = manual restart needed
• FAULT LED: Solid amber = PROFINET diagnostic condition present
• CONNECT LED: Flashing amber = startup; Solid green = communication established; Rapid amber flash = firmware update active
• LAN LED: Flashes during Ethernet packet activity

FAQ

• Q: What is the IC200PNS002 module used for?
  A: It acts as a PROFINET scanner to connect Versamax I/O to a PROFINET network for real-time control.
• Q: What type of network ports does it have?
  A: It provides two 100 Mbps SC-Duplex fiber optic ports for reliable, noise-immune communication.
• Q: What controller is required?
  A: It must be used with an RX3i programmable controller with firmware version 7.0 or newer.

For pricing and technical support for the IC200PNS002, contact us at sale@etowonauto.com.