Bahagian automasi, bekalan seluruh dunia
0
  • 51308363-175
  • 51308363-175-1
  • 51308363-175-2
1 3

51308363-175

Honeywell CC-TAIX01 51308363-175 Analog Input Module

Stok ada (12 unit), sedia untuk dihantar

  • Manufacturer: Honeywell

  • Product No.: 51308363-175

  • Product Type: Analog Input Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 350g

  • Shipping port: Xiamen

  • Warranty: 12 months

Polisi Pemulangan 30 Hari · Jaminan 12 Bulan
  • Penghantaran Pantas
  • Sokongan 24/7
  • Jaminan Kualiti

Penerangan

Product Overview

The Honeywell CC-TAIX01 51308363-175 operates as a high-density Analog Input Field Termination Assembly (IOTA) designed for the Experion Process Knowledge System (PKS) C300 controller. This premium module bridges field transmitters and your control system, delivering accurate signal conditioning and superior transient protection for critical industrial process loops.

Core Technological Advantages

Robust Isolation Architecture

The hardware features 1500 VAC continuous galvanic isolation between field circuitry and internal logic, blocking voltage surges and eliminating ground-loop interference.

Advanced Thermal Efficiency

Low power engineering minimizes thermal buildup. The unit draws only 0.320 Amps at 24 VDC, limiting total heat dissipation to 2.464 Watts.

Active Signal Protection

Onboard surge suppression and integrated low-pass filtering clean data streams by attenuating high-frequency electrical noise and EMI above 50 Hz.

Technical Specifications

Specification Parameter Value / Operational Limit
Manufacturer Honeywell
Model Number CC-TAIX01
Part Number 51308363-175
Input Channels 16 High-Level Analog Inputs
Signal Range 4 to 20 mA / 1 to 5 VDC
Current Consumption 0.320 Amps @ 24 VDC maximum
Heat Dissipation 2.464 Watts maximum
Resolution & Accuracy 16-Bit Sigma-Delta / ±0.075% FS
Operating Temperature 0°C to +60°C (+32°F to +140°F)
Harsh Environment Protection ISA-S71.04 Class G3 Conformal Coating

Engineering Installation Guide

Cabinet Placement

Mount the unit vertically or horizontally on standard Experion C300 rows. Maintain 50mm clearance above and below the assembly for natural convective airflow.

Field Wiring Rules

Use 18 AWG (0.8 mm²) twisted, shielded pair cables. Ground the shield at a single point on the board bars. Keep low-voltage lines 300mm away from high-voltage AC cables.

Hazardous Locations

In Class I, Division 2 / Zone 2 setups, torque screw clamps to 0.5 Nm. Never swap or disconnect wiring while the 24 VDC power is active unless the area is verified safe.

Engineering Advantages

Native DCS Compatibility

The module provides plug-and-play auto-discovery within Experion PKS, eliminating manual driver configuration or firmware re-flashing.

Environmental Durability

Standard G3 conformal coating guards circuits against H2S, Cl2, and NH3 gases, preventing corrosive oxidation and failure.

System Fault Redundancy

Dual-cable routing supports sub-millisecond line switching, preventing unplanned process shutdowns if a main signal line breaks.

Technical FAQs

Q1: How does the module handle a broken field transmitter wire?
A1: Integrated NAMUR NE43 burnout detection flags faults when current drops below 3.6 mA, triggering an immediate HMI alarm and moving the loop to a safe state.

Q2: Can this assembly supply loop power to field transmitters?
A2: Yes. The board routes 24 VDC power directly to field terminals, delivering up to 25 mA per channel to run 2-wire transmitters without external power blocks.

Q3: What specific hardware metrics can be monitored online?
A3: The DCS displays internal hardware temperature, supply rail limits (faulting below 21.6 VDC or above 28.8 VDC), and ADC converter health.

🏷️ Tags: Analog Input Module

Skalar (V/f)

Vektor

Dikuasakan oleh AC
  • Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
  • Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
  • Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
  • Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
  • Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.

Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.

Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.

Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

 Lihat Butiran Produk

PASTIKAN PRESTASI MESIN YANG BOLEH DIPERCAYAI

Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.

Beli sekarang
Nasihat teknikal langkah demi langkah dan petua pembelian untuk bahagian automasi industri.

Panduan Teknikal & Pembelian

Lihat semua blog