Bently Nevada 3300 XL 8mm M10x1 330103-00-08-10-02-00

Bently Nevada 330103-00-08-10-02-00 8mm Proximity Probe

Bently Nevada 330103-00-08-10-02-00 | 3300 XL 8mm Proximity Probe, M10x1 metric thread, without armor. Provides 7.87 V/mm (200 mV/mil) output over a 2 mm (80 mils) linear range. Engineered for radial vibration, axial position, and Keyphasor measurements in turbomachinery, compressors, and pumps. Weight: 323 g/m (11.4 oz).

Key Features

2 mm (80 mils) linear measurement range from 0.25 to 2.3 mm. 7.87 V/mm (200 mV/mil) scale factor. Recommended gap -9 Vdc (approx. 1.27 mm / 50 mils). Patented TipLoc and CableLoc designs provide 330 N (75 lbf) pull strength. Miniature coaxial ClickLoc connector, standard cable (Option 02). PPS probe tip material. AISI 303/304 stainless steel case. M10x1 thread, 15 mm maximum thread engagement. Operating temperature -52°C to +177°C. Weight 323 g/m (11.4 oz).

Technical Specifications

Ordering Code Breakdown

330103-00-08-10-02-00

330103 – 3300 XL 8mm Probe, M10x1 thread, without armor.
00 – Unthreaded Length: 0 mm.
08 – Overall Case Length: 80 mm.
10 – Total Length: 1.0 m (3.3 ft).
02 – Miniature coaxial ClickLoc connector, standard cable.
00 – Agency approval not required.

Hazardous Area Approvals

Installation Notes

Mount probe using M10x1 metric thread. Maximum thread engagement 15 mm. Set initial gap to -9 Vdc (approx. 1.27 mm / 50 mils) for radial vibration monitoring. Use 3-conductor shielded triad cable for field wiring (16-24 AWG), max length 305 m (1,000 ft). Ensure temperature does not drop below -34°C (-30°F) to prevent pressure seal failure. For hazardous area installation, use intrinsic safety barriers per drawing 141092 or non-incendive circuit per drawing 140979.

Engineering Advantages

M10x1 metric thread simplifies installation in metric-dimensioned machinery. 8mm probe design delivers thicker PPS encapsulation for superior durability. TipLoc and CableLoc technologies prevent common failure modes. 330 N pull strength ensures cable integrity. 2 mm linear range with 7.87 V/mm scale factor provides precise measurement. ATEX/IECEx hazardous area approvals enable installation in Zone 0 and Zone 2 environments.

FAQs

Q1: What is the thread size?
A1: M10 x 1 metric thread, with 15 mm maximum thread engagement.

Q2: What is the recommended gap setting for radial vibration?
A2: -9 Vdc, approximately 1.27 mm (50 mils).

Q3: What hazardous area approvals are available?
A3: Intrinsic safety (ia) for Class I Zone 0, and non-sparking (nA/ec) for Class I Zone 2/Division 2.