Bently Nevada 330103-00-06-10-02-00 Probe | 60mm Case

Product Overview

The Bently Nevada 330103-00-06-10-02-00 is a 3300 XL 8 mm proximity probe with M10×1 thread, without armor. Its 60 mm case and 1.0-metre cable suit turbine and compressor monitoring where a longer metric probe body is required. The probe weighs approximately 0.16 kg (0.35 lb).

Ordering Code Breakdown

330103 – 3300 XL 8 mm Probe, M10 x 1 thread, without armor
00 – Unthreaded Length: 0 mm
06 – Overall Case Length: 60 mm
10 – Total Cable Length: 1.0 metre (3.3 ft)
02 – Connector: Miniature coaxial ClickLoc, standard cable
00 – Agency Approval: Not required

Technical Specifications

Engineering Advantages

The 60 mm case provides extra reach for deep mounting bosses without armor bulk. The 15 mm maximum thread engagement prevents over-torque damage to the probe body. Viton O-ring sealing handles differential pressure between tip and case. Maximum field wiring runs of 305 metres support remote Proximitor mounting. At roughly 0.16 kg, the probe adds minimal mass to the mounting point.

Technical FAQs

Q1: What is the case length and thread engagement?
A1: 60 mm case with M10×1 thread, maximum engagement 15 mm.

Q2: What is the recommended gap setting?
A2: -9 Vdc, approximately 1.27 mm (50 mils) for radial vibration.

Q3: How long can the field wiring run?
A3: Maximum 305 metres (1,000 feet) between Proximitor and monitor.