Bently Nevada 330104-00-14-05-02-00 Sonda mai kariya 0.5m

Takaitaccen Bayanin Samfuri

Bently Nevada 330104-00-14-05-02-00 na'urar auna kusanci ta masana'antu mai diamita 8mm ce, muhimmin ɓangare na tsarin 3300 XL Transducer System. Wannan samfurin yana da siffofi na **tsawon kwasfa 140mm** da kuma **zaren ma'aunin M10x1**, wanda hakan ke sanya shi ya dace sosai da sakawa ta cikin kwaf ɗin injuna masu kauri ko faranti na musamman na hawa. **Kebul mai sulke na mita 0.5** yana ba da kariyar inji mai ƙarfi daga goge-goge da murɗewa, yayin da maƙunsar kebul na coaxial na ClickLoc™ mai ƙanƙanta ke tabbatar da rufewa mai ƙarfi kuma marar shigar danshi. An yi ƙwanƙolinsa da PPS da aka ƙarfafa da gilashi kashi 30%, wannan binciken an gina shi ne don ya kiyaye ingancin sigina a gaban man turbin da kuma yanayin girgiza mai ƙarfi.

Muhimman Fa'idodin Fasaha

Ayyukan Lantarki Masu Daidaito

Tare da juriya na DC na al'ada 7.45 Ω ± 0.5 Ω don tsawonsa na 0.5m, 330104-00-14-05-02-00 yana tabbatar da ƙaramin bambancin daidaitawar auna. Wannan daidaiton lantarki, haɗe da sensitivity ɗin wutar ciyarwa ƙasa da 2mV/V, yana tabbatar da fitarwa mai kwanciyar hankali kuma madaidaiciya daga -1 zuwa -17 Vdc, wanda ke ba da damar sa ido daidai kan muhimman gibin sandar shaft.

Kare Inji Mai Ƙarfi

Ginin bakin karfe mai sulke yana kare wayoyin ciki masu rufin FEP daga tsauraran yanayin bene na masana'anta. Bugu da ƙari, ƙarshen binciken da kuma kwasfa an ƙera su ne don su rufe bambancin matsin lamba har zuwa 3.5 bar (50 psi), tare da amfani da zoben hatimi na Viton® O-ring mai inganci domin hana yayewar ruwa daga kwaf na inji.

Amincin ClickLoc™

Mai haɗa ClickLoc™ da aka saka daga masana'anta yana ba da matakin kariya na IP67, yana kare haɗin sigina daga gurɓatattu. Tsarin kullewarsa na musamman na "click" yana hana mai haɗin ya sake saboda girgizar injuna, yana tabbatar da ci gaba da aiki ba tare da yankewa ba ga tsarin sa ido kan girgiza.

Takamaiman Bayanai na Fasaha

Ka'idojin Sakawa & Mu'amala

• Daidaidawar Tsawon Tsari: Wannan furob na 0.5m dole ne a yi amfani da shi tare da igiyar tsawo ta 8.5m don cimma daidaitaccen tsawon tsarin mita 9 da ake buƙata ta Proximitor Sensor.
• Daidaita Gibin: A daidaita gibin iska zuwa 1.27 mm (50 mils) a kan manhajar karfen AISI 4140 da ake nufi don tabbatar da cewa firikwensin yana aiki a madaidaiciyar layin karatunsa.
• Hanyoyin Kariyar Iron Armor: Lokacin jan igiyar da aka rufe da armor, a guji lanƙwashe ta sosai wanda zai iya lalata ƙarfin kariyar bakin ƙarfe ko wayoyin da ke ciki.

Tambayoyin Fasaha (FAQs)

Q1: Za a iya amfani da wannan furob a wuraren da ke da haɗari?

A1: Eh, jerin 330104 yana bin ka'idodin ATEX/IECEx idan an girka shi tare da shingen tsaro na ciki da suka dace da kuma na'urorin firikwensin Proximitor.

Q2: Menene amfanin akwati na 140mm?

A2: Tsawon akwati 140mm (Zaɓi 14) an ƙera shi ne musamman don injuna masu bangon dauri ko tangarda a ciki inda daidaitaccen furob ba zai iya kai wa saman da ake niyya ba.

Q3: Shin zoben Viton® O-ring yana cikin kayan?

A3: Eh, furobnan yana da zoben Viton® O-ring da aka gina a ciki don tabbatar da hatimin bambancin matsin lamba har zuwa bar 3.5 a wurin girkawa.