Bently Nevada 330104-00-12-05-02-CN Sonda M10x1 mai kariya

Bayani Kan Samfur

Bently Nevada 330104-00-12-05-02-CN na’urar bincike ce ta kusanci (proximity probe) mai nauyin aiki 3300 XL 8 mm da aka ƙera don kariyar injuna masu daidaito sosai. Wannan takamaiman samfurin yana da zaren ma’auni na M10 x 1 kuma an sanye shi da garkuwar ƙarfe bakin karfe mai hade da igiyar lantarki, wadda ke ba da kariya ta inji mai ƙarfi ga kebul ɗin coaxial a muhallin masana’antu masu tsanani inda goge-goge ko tarkace na zahiri ke iya zama matsala.

An ƙera shi a U.S.A., wannan na’urar bincike an tsara ta ne don ƙananan wuraren shigarwa da ke buƙatar tsawon jimla na mita 0.5 (ƙafa 1.6). Duk da ginin garkuwa mai ƙarfi, nauyin tsarin kusan 323 g/m (oz 11.4) ne a ɓangaren kebul, wanda ke sauƙaƙa sarrafawa yayin da yake kiyaye hatimin matsa lamba mai inganci ta bakin tip na roba PPS da zoben Viton® O-ring.

Saitin Fasaha

Muhimman Fasalolin Aiki

• Gidaje na Ma’aunin Metric mai ƙarfi: Akasin bakin karfe AISI 303/304 tare da zaren M10x1 yana ba da ingantaccen wurin ɗaurewa don ƙa’idojin injuna na ƙasashen duniya.
• Ƙarin Kariyar Kebul: Garkuwar da aka sakawa daga masana’anta tana hana lanƙwasawar kebul fiye da kima kuma tana kare layin 75 Ω coaxial na ciki daga lalacewar muhalli.
• Tsabtataccen Siginar Fitarwa: Yana da juriya ta DC na al’ada 7.45 ± 0.50 Ω, an daidaita shi musamman don saitin mita 0.5 domin rage asarar sigina zuwa mafi ƙanƙanta.
• Daidaitawar Ma’auni ta Ƙa’ida: An inganta shi don amfani da guraben ƙarfe na AISI 4140, yana samar da daidaitattun ma’aunai don auna karkarwar radial da matsayi na axial.

Kayan Lantarki & Na Inji

Jerin 330104 yana haɗuwa daidai da na’urorin 3300 XL Proximitor® Sensors, suna aiki da wutar -24 Vdc. An ƙera na’urar binciken ne don ta jure bambancin matsa lamba tsakanin tip da jikin akasin, godiya ga zoben Viton® O-ring na ciki. Don samun madaidaicin zangon layi, tabbatar cewa wutar lantarki tana tsakanin -23 Vdc zuwa -26 Vdc. Juriya ta fitarwar na’urar bincike an daidaita ta ne a 50 Ω domin ta dace da wayoyin tsawo na tsarin.

Tambayoyi na Fasaha (FAQs)

Q1: Menene amfanin tsawon na’urar bincike na mita 0.5?
A1: Gajeren tsawon 0.5m ya dace sosai da shigarwar da aka ɗora na’urar Proximitor kusa ƙwarai da wurin shigar da probe, yana rage yawan kebul da za a sarrafu.

Q2: Shin wannan probe ɗin na aiki da wayoyin tsawo na 3300 XL na yau da kullum?
A2: Eh, mahaɗin ClickLoc™ (Zaɓi 02) na’urar haɗin coaxial ce karama ta daidaitacciya wadda take haɗuwa kai tsaye da duk wayoyin tsawo na jerin 3300 XL.

Q3: Za a iya amfani da wannan probe a muhallin da ke da matsa lamba mai yawa?
A3: An ƙera probe ɗin ne da zoben Viton® O-ring don kulle bambancin matsa lamba. Don takamaiman buƙatun matsa lamba mai yawa, don Allah tuntuɓi sashen fasaha don gwajin aikace-aikace.

Matsayi: Sabon samfur & Asali cikin marufin masana’anta

Garanti: Garanti na watanni 12 na masana’anta