330104-00-07-10-02-05 Bently Nevada 3300 XL Sonda kusanci 8mm

Takaitaccen Bayanin Samfuri

Bently Nevada 330104-00-07-10-02-05 na'ura ce mai daidaito sosai ta 3300 XL sonda kusanci 8mm wadda ke da ma'aunin zare na mita M10 x 1 da garkuwar bakin karfe da aka haɗa a jikinta. Wannan firikwensin muhimmin ɓangare ne na jerin 3300 XL, wanda aka ƙera don aunawa girgizar juyawa (radial vibration) da matsayi a tsaye (axial position) a kan injinan da ke amfani da ɗanyen mai a matsayin mai (fluid-film bearing machines). Tare da ƙarfaffiyar ƙirarsa da ClickLoc ƙaramin haɗin coaxial, yana ba da daidaiton sigina mai kyau da tabbacin aiki a cikin muhallin masana'antu masu tsanani kamar tashoshin wutar lantarki da matatun mai.

Saitin Fasaha

• Mai ƙera: Bently Nevada (Baker Hughes)
• Lambar Sashi: 330104-00-07-10-02-05
• Tsawon ɓangaren da babu zare: 00 mm
• Jimillar tsawon ɓangaren rufin jiki: 70 mm
• Jimillar tsawo: Mita 1.0 (kafa 3.3)
• Nau'in Haɗi: Ƙaramin haɗin coaxial ClickLoc (Igiyar daidaitacciya)
• Zabin Garkuwa: Garkuwar bakin karfe da aka haɗa
• Amincewar Hukumo: CSA, ATEX, da IECEx – takardun shaida da dama (-05)

Takardun Fasaha

Tsarin Injin & Kariya ta Muhalli

1. Zaren Ma'aunin Mita: Jerin 330104 na amfani da daidaitaccen zare na mita M10 x 1. Wannan takamaiman samfurin yana da tsawon jiki 70mm ba tare da wani ɓangare da babu zare ba, wanda ke ba da damar soka zare sosai har zuwa 15mm a cikin jikin ko murfin injin. Ƙarfaffiyar ginin na'urar na nuna nauyin kusan gram 323 a kowane mita, wanda ke tabbatar da kwanciyar hankali na inji a lokacin girgiza.

2. Kayan Zamani: Ana ƙera ƙarshen sonda da Polyphenylene sulfide (PPS), wani nau'in roba mai ƙarfi da ke jure wa sinadarai da shan danshi. Ana gina jikin sonda daga bakin karfen 303 ko 304, wanda ke ba da babban kariya daga tsatsa da ƙarfin inji.

3. Haɗin ClickLoc: Ƙaramin haɗin coaxial na ClickLoc an rufe shi da zinariya don samun mafi girman isar lantarki kuma yana da tsarin kullewa wanda ke hana shi zubewa ko cirewa ba da gangan ba saboda girgizar injin mai saurin gaske.

Jagorar Shigarwa

Daidaitaccen Gibin Da Ake Ba da Shawara: Don sa ido kan girgizar juyawa, ana ba da shawarar gibin daidai na -9 Vdc (kimanin 1.27 mm ko 50 mils). Wannan yana sanya firikwensin a tsakiyar iyakar madaidaiciyar auna ta 2mm don samun daidaiton auna mafi kyau.

Wayoyi a Yankunan Haɗari: Lokacin da ake amfani da shi a aikace-aikacen da ke da aminci ta dabi'a (Class I, Zone 0), dole ne a shigar da sonda tare da katangar zener da aka amince da su ko na'urorin keɓe wutar lantarki (galvanic isolators) gwargwadon zane-zanen Bently Nevada na 141092. Don yankuna Division 2 / Zone 2, dole ne a bi ƙa'idodin yi wa igiyoyi na'urori waɗanda ba sa iya haifar da ƙonewa (non-incendive wiring).

Gargadin Hatimin Matsin Lamba: Ko da yake ƙarshen sonda yana da ƙimar jurewa manyan zafin jiki, fallasa sonda ga zafi ƙasa da -34°C (-30°F) na iya lalata hatimin matsin lamba na zoben Viton O-ring. Idan aikace-aikacenku yana da babban bambancin matsin lamba, ku tuntuɓi goyon bayan fasaha don tabbatarwa.

Tambayoyi na Fasaha

Q1: Mene ne mafi nisan da za a iya samu tsakanin sonda da na'urar Proximitor Sensor?
A1: Jimillar tsawon sonda da igiyar tsawo dole ne ya yi daidai da daidaiton na'urar Proximitor Sensor (yawanci mita 5 ko 9). Wannan sonda ɗin musamman sigar mita 1.0 ce, wadda ke buƙatar igiyar tsawo da ta dace da ita.

Q2: Shin wannan sonda ɗin tana dacewa da daidaitattun na'urorin 3300 XL Proximitor Sensors?
A2: Eh, tana dacewa gaba ɗaya da jerin 3300 XL, tana bayar da ma'aunin sikeli na 7.87 V/mm (200 mV/mil).

Q3: Ta yaya garkuwar bakin karfe ke kare sonda?
A3: Garkuwar tana ba da kariya ta inji daga murƙushewa ko goge-goge ga igiyar coaxial da ke ciki, wanda ya sa ta dace da jan igiyar ta cikin yankunan masana'antu masu tsanani ko hanyoyin cikin injuna.