Evinizi ən son çoxfunksiyalı elektronika həlləri ilə dəyişdirin, ağıllı işıqlandırmadan səsə nəzarət olunan cihazlara qədər — hamısı həyatı daha asan, təhlükəsiz və daha əlaqəli etmək üçün hazırlanıb. Əməliyyatlarınızı Bently Nevada 3500 Monitorinq Sistemi ilə optimallaşdırın, bu sistem real vaxtda vibrasiya və maşın vəziyyətinin monitorinqini təmin edərək nasazlıqların qarşısını alır və iş vaxtını maksimuma çatdırır.
SKU:V18345-1010520001
Valve Positioner ABB V18345-1010520001
Manufacturer: ABB
Product No.: V18345-1010520001
Product Type: Valve Positioner Module
Product Origin: Sweden
Payment:T/T, Western Union
Weight: 1700g
Shipping port: Xiamen
Warranty: 12 months
Paylaşmaq
- Sürətli Çatdırılma
- 24/7 Dəstək
- Keyfiyyət təminatı
Təsvir
Product Overview
ABB V18345-1010520001 is an electro-pneumatic valve positioner from the TZIDC series, built for precise control of pneumatic actuators on large rotary machinery. It converts a 4–20 mA control signal into a proportional air output, achieving 0.5% linearity and ±0.2% repeatability. The non-contact position sensor eliminates mechanical wear, delivering stable performance in turbine, compressor, and process valve applications.
Technical Configuration
Core Hardware
The positioner uses a piezoresistive pressure sensor for air output feedback and a Hall-effect sensor for valve stem position. The HART protocol enables remote calibration and diagnostics without breaking the air loop. A local LCD and push-buttons allow on-site setup, zero/span adjustment, and fault readout.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Signal | 4–20 mA (HART) |
| Air Supply | 1.4–6.0 bar |
| Air Consumption | ≤0.03 kg/h (steady state) |
| Linearity | ±0.5% of span |
| Repeatability | ±0.2% of span |
| Operating Temperature | -40°C to +80°C |
| Protection Class | IP65 |
| Pneumatic Ports | 1/4" NPT |
| Electrical Entry | M20×1.5 |
| Housing Material | Aluminum, powder-coated |
| Weight | Approx. 1.7 kg |
Installation Guide
Mount the positioner rigidly on the actuator yoke and verify the feedback lever travels 0–100% without binding. Set the air supply to 1.4 bar minimum; below this, the output may not reach full stroke. Keep cable bend radius above 50 mm and route signal wiring away from VFD cables. For explosive atmospheres, confirm the certification label matches the zone classification before energizing.
Engineering Advantages
The TZIDC platform tolerates supply air contaminated with oil and dust, reducing downtime in dirty plant environments. The aluminum housing resists corrosion in coastal and chemical plants. HART diagnostics report valve signature data, helping maintenance teams plan repairs before a trip occurs. The unit drops into existing 4–20 mA loops without extra wiring.
Technical FAQs
Q1: How do I verify the positioner is calibrated correctly?
A1: Apply 4 mA and confirm the valve reaches 0% stroke; apply 20 mA and confirm 100%. Check the LCD readout matches the actual stem position within ±0.5%.
Q2: What does the 1010520001 suffix indicate?
A2: It defines the analog HART input, double-acting output, IP65 aluminum housing, and standard temperature range. Confirm against the nameplate before ordering spares.
Q3: Can this unit replace an older TZIDC positioner?
A3: Yes, it shares the same mounting footprint and 4–20 mA interface. Verify the pneumatic port size and cable entry match the existing installation.
Əlavə Texniki Xüsusiyyətlər
- Gümüş
Skalyar (V/f)
Vektor
AC ilə işləyən
Alış Rəhbəri
- Sifariş verməzdən əvvəl dəqiq model, hissə nömrəsi və spesifikasiyaları təsdiqləyin.
- Mövcud maşın və ya idarəetmə sistemlərinizlə uyğunluğu təmin edin.
- Texniki dəstək üçün sale@etowonauto.com ünvanına və ya +8617859788089 nömrəsinə müraciət edin.
- Çatdırılma variantlarını, çatdırılma müddətlərini və göndərmə tələblərini nəzərdən keçirin.
- Quraşdırma zamanı istehsalçı təlimatlarına və ən yaxşı təcrübələrə əməl edin.
Göndərmə və Qaytarma
Anbarda olan məhsullar adətən eyni iş günü göndərilir. Hal-hazırda stokda olmayan məhsullar üçün göndərmə vaxtları mövcudluğa görə dəyişə bilər. Beynəlxalq çatdırılma mövcuddur və çatdırılma xərcləri təyinat, çəki və daşıyıcı seçiminə əsasən hesablanır.
Qaytarma məhsulun qəbulundan etibarən 30 gün ərzində qəbul edilir, məhsullar istifadə olunmamış və orijinal vəziyyətdə olduqda. Qaytarma göndərmə xərcləri müştərinin üzərinə düşür. Hər hansı məhsulu qaytarmazdan əvvəl qaytarma icazəsi almaq üçün bizimlə əlaqə saxlayın.
Ətraflı məlumat üçün zəhmət olmasa Çatdırılma və Qaytarma Siyasətimizi nəzərdən keçirin.

3500/61-05-CN Temperature Monitor Module | Bently Nevada
3500/22-01-02-CN TDI Module Bently Nevada
Bently Nevada 3500/42-04-00 | Seismic Monitor
-
Sürətli Çatdırılma
Orijinal sənaye avtomatlaşdırma hissələri dünya üzrə sürətli çatdırılma üçün mövcuddur.
-
Asan Qaytarma
Etibarlı satış sonrası qoruma üçün 12 aylıq zəmanətlə 30 günlük geri qaytarma dəstəyi.
-
24/7 dəstək
Stabil və səmərəli əməliyyatların davam etdirilməsinə kömək edən çevik peşəkar dəstək.
-
Əsl və Orijinal
100% orijinal, birbaşa etibarlı sənaye avtomatlaşdırma istehsalçılarından əldə olunub.
Texniki və Alış Bələdçisi
-
When Should You Replace a Yokogawa Analog IO Card?
This article breaks down Yokogawa analog AI/AO card calibration tolerances, drift aging benchmarks, and formal replac...
-
What Performance Gains Does S7-1500 Offer Over Legacy S7 PLCs?
Legacy Siemens S7-300 and S7-400 PLCs face spare-part shortages, rising failure rates and limited network capability,...
-
What Logic Changes Cut SIS False Trips by 94%?
This article examines practical logic modification and parameter tuning methods for ABB 800xA HI SIL3 safety ins...
-
Why Do FTE Redundancy Failovers Lock Up in DCS?
Honeywell FTE delivers sub-500 ms failover for Experion PKS, yet field records show 38% of outages stem from installa...
-
How Does the Bently Nevada 3500/42M Vibration Module Drift?
This technical guide examines the Bently Nevada 3500/42M vibration module within industrial automation architect...
-
What Causes IC694MDL Fault Codes in GE RX3i PLC Systems?
This guide explains GE RX3i IC694MDL discrete I/O fault codes, key electrical parameters, ESD and torque requirements...
