IC660BBD025 Genius Sink I/O Block 5/12/24 VDC - GE Fanuc

GE Fanuc / Emerson IC660BBD025: 32-Circuit Sink I/O Block

The GE Fanuc IC660BBD025 is a versatile 32-circuit Genius I/O block. It interfaces PLCs with field devices like proximity switches. This sink block is configurable for input, output, or output with feedback. It provides reliable distributed I/O for industrial automation.

Core Specifications

• Manufacturer: GE Fanuc / Emerson Automation
• Part Number: IC660BBD025 Genius Sink I/O Block
• Compatible Series: Series 90-30, Series 90-70 PLCs
• I/O Circuits: 32 configurable sink circuits
• Voltage: 5 / 12 / 24 VDC (TTL compatible)
• Load Current: 0.5 Amperes per circuit steady-state

Electrical & Performance Details

• Input Voltage Range: 4.9-5.3 VDC (5V), 10-30 VDC (12/24V)
• Inrush Current: 4 Amperes maximum for 10 ms
• Total Output Current: 16 Amperes maximum for module
• Input Processing: 1.4 ms typical processing time
• Filter Times: Selectable 1 to 100 ms in steps
• Isolation: 850 Volts block-to-block isolation

Physical & Environmental

• Dimensions: 8.83 x 3.58 x 4.7 inches (224 x 91 x 119 mm)
• Weight: Approximately 1.5 kg (3.3 lbs) typical
• Operating Temp: 0°C to 60°C (32°F to 140°F)
• Storage Temp: -40°C to 100°C (-40°F to 212°F)
• Humidity: 5-95% non-condensing
• Heat Dissipation: 11W (8 inputs), 18W (32 inputs)

Configuration & Features

• Configurable Circuits: Each of 32 circuits as Input, Output, or Output with Feedback
• Diagnostics: Monitors output, checks switch state, advanced diagnostics
• Protection: Short-circuit, overload, and overtemperature protection
• Communication: Genius bus, up to 7500 feet remote installation
• Configuration: Via Hand Held Monitor (HHM) port
• Compatible Base: IC660TBD025 terminal base assembly

LED Indicators & Ports

• Module OK LED: Indicates proper block operation
• I/O Enabled LED: Shows I/O circuits are active
• 32 Point LEDs: Individual status for each I/O circuit
• HHM Port: For configuration and monitoring
• Serial Ports: Two communication ports available

Package Contents

• One (1) IC660BBD025 Genius I/O Block
• Documentation and configuration guide
• (Note: Terminal base IC660TBD025 sold separately)

Installation Guidelines

• Mount in protective enclosure, avoid contaminants
• Ensure adequate cooling and airflow around block
• Connect to reliable grounding system via ground screws
• Wire power disconnects to remove block and input power simultaneously
• Use Hand Held Monitor for initial configuration and testing
• Connect field devices to terminals 5 through 46

Shipping Information

• Shipping weight: Approximately 1.5 kg (with packaging)
• FedEx, UPS, DHL shipping available worldwide
• Protected packaging for secure delivery

Frequently Asked Questions

What is the difference between Sink and Source blocks?

• This IC660BBD025 is a Sink block (receives current). For providing current to field devices, use the Source block IC660BBD024.

What devices can connect to this I/O block?

• It works with 2-wire/3-wire proximity switches and other binary devices using 5/12/24 VDC signals in sink configuration.

How is this block configured and monitored?

• Use the integrated Hand Held Monitor (HHM) port with a monitor to configure circuits, set filter times, and check status via LEDs.

Note on Product Status:

• The IC660BBD025 is a discontinued product from the GE Fanuc/Emerson Genius I/O series but remains available on the secondary market.

Content by Etowon Auto.