Bahagian automasi, bekalan seluruh dunia
0
  • IC670PBI001-1
  • IC670PBI001-3
1 3

IC670PBI001

IC670PBI001 Profibus BIU | GE Fanuc Field Control 12M Baud

Hanya tinggal 9 unit sahaja

  • Manufacturer: General Electric

  • Product No.: IC670PBI001

  • Product Type: Interface Unit

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 360g

  • Shipping port: Xiamen

  • Warranty: 12 months

Polisi Pemulangan 30 Hari · Jaminan 12 Bulan
  • Penghantaran Pantas
  • Sokongan 24/7
  • Jaminan Kualiti

Penerangan

Product Overview

The GE Fanuc IC670PBI001 is a high-performance Profibus Bus Interface Unit (BIU) designed for the Field Control series of modular, distributed I/O systems. Operating on a 24V DC external power supply (18–30V DC range), this module serves as the central communication gateway, interfacing up to eight (8) Field Control I/O modules to a host CPU via a high-speed Profibus DP network. Constructed with a rugged, compact aluminum housing, the unit features an approximate weight of 0.36 kg (0.8 lbs). Equipped with a standard 9-pin D-sub Profibus network port and a dedicated 9-pin D-sub Hand-Held Programmer (HHP) port, the IC670PBI001 supports selectable transmission speeds up to 12 Mbits. Mounted directly to a Bus Interface Terminal Block, it enables convenient hot-swappable module replacement without disturbing field wiring.

Technical Specifications

Parameter Specification
Product Catalog Number IC670PBI001
Manufacturer / Product Family GE Fanuc / Field Control Series
Product Type Profibus Bus Interface Unit (BIU)
Rated Input Voltage & Range 24 VDC Nominal (18 to 30 VDC Range)
Input Power & Power Dissipation 7.7 Watts Input Power | 4.45 Watts Dissipation
Supported Protocol & Topology Profibus DP | Linear Bus Topology (Daisy-Chain)
Transmission Speeds 9.6K, 19.2K, 93.75K, 187.5K, 500K, 1.5M, 3M, 6M, and 12 Mbits
Communication Ports 1x 9-Pin D-sub (Profibus Network), 1x 9-Pin D-sub (HHP Programmer)
Node Addressing & Expansion Capacity DIP Switches (Address 00–32) | Up to 8 I/O Modules per BIU
Approximate Module Weight 0.36 kg (0.8 lbs)
Status LED Indicators PWR (Power), RUN, OK
Holdup Time & Reliability MTBF 10 ms Maximum Holdup Time | 180,000 Operating Hours MTBF
Mounting Options DIN Rail or Panel Mount via BIU Terminal Block
Operating Temperature Range 0°C to 55°C (32°F to 131°F)

Key Hardware & Operational Features

  • Intelligent Distributed Processing: Manages scan processing, analog scaling, range selection, and I/O fault reporting for up to 8 local Field Control I/O modules.
  • High-Speed Communication: Supports flexible Profibus DP network transmission rates ranging from 9.6 Kbits up to 12 Mbits over shielded twisted-pair cabling.
  • Modular Maintenance Architecture: Mounts on a dedicated BIU terminal base, allowing rapid module insertion and removal without disconnecting network or field wiring.
  • Dedicated Programming Interface: Features a built-in 9-pin HHP port for local programming, diagnostic displays, program transfers, and I/O forcing.

Installation & Field Wiring Guidelines

1. Unit Mounting: Snap the BIU terminal block onto a standard DIN rail or secure it to a panel using mounting tabs. Seat the IC670PBI001 module firmly into the terminal base.

2. Network & Hardware Setup: Set node address (00–32) using the 8-position DIP switch array. Connect the 9-pin D-sub Profibus cable, ensuring terminating resistors are enabled at end nodes.

3. Power & Field Wiring: Wire external 24 VDC power to the terminal base. Verify line power protection via the onboard replaceable slow-blow fuse before energizing.

Frequently Asked Questions (FAQs)

Q1: How many I/O modules can the IC670PBI001 support?
A1: A single IC670PBI001 BIU module can host and manage up to 8 Field Control I/O modules.

Q2: How is the Profibus node address configured on this module?
A2: Address range 00 to 32 is set manually via the 8-position DIP switch array on the unit.

Q3: What maximum baud rate does the IC670PBI001 support?
A3: The module supports standard Profibus transmission speeds up to 12 Mbits.

🏷️ Tags: Interface Unit

Skalar (V/f)

Vektor

Dikuasakan oleh AC
  • Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
  • Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
  • Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
  • Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
  • Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.

Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.

Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.

Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

 Lihat Butiran Produk

PASTIKAN PRESTASI MESIN YANG BOLEH DIPERCAYAI

Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.

Beli sekarang
Nasihat teknikal langkah demi langkah dan petua pembelian untuk bahagian automasi industri.

Panduan Teknikal & Pembelian

Lihat semua blog