Bahagian automasi, bekalan seluruh dunia
0
  • 1756-IR6I
  • 1756-IR6I-1
  • 1756-IR6I-2
1 3

1756-IR6I

Allen-Bradley 1756-IR6I ControlLogix 6-Point Isolated RTD Input Module

Stok ada (16 unit), sedia untuk dihantar

  • Manufacturer: Allen-Bradley

  • Product No.: 1756-IR6I

  • Product Type: Analog RTD Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 320g

  • Shipping port: Xiamen

  • Warranty: 12 months

Polisi Pemulangan 30 Hari · Jaminan 12 Bulan
  • Penghantaran Pantas
  • Sokongan 24/7
  • Jaminan Kualiti

Penerangan

Allen-Bradley 1756-IR6I ControlLogix RTD Input Module

The Allen-Bradley 1756-IR6I is a high-precision, temperature-measuring analog input module for the ControlLogix platform. Featuring six individually isolated channels and a 16-bit resolution architecture, this lightweight 0.32 kg module interfaces with 3-wire and 4-wire RTD sensors to deliver accurate thermal tracking in demanding process environments.

Key Advantages

  • Channel-to-Channel Isolation: Six fully independent isolated sensor circuits eliminate ground loop risks and prevent cross-channel signal corruption.
  • Dual Processing Modes: Supports baseline integer conversion as well as advanced 32-bit floating-point execution with temperature linearization and process/rate alarming.
  • Intelligent Diagnostics: Embedded with under-range/over-range detection, programmable digital notch filters, and real-time wire-off loop sensing.

Technical Specifications

Input Points 6 Individually Isolated Channels (20-pin faceplate)
Supported RTD Types Platinum (100, 200, 500, 1000 Ω; α=385/3916), Nickel (100, 120, 200, 500 Ω; α=672/618), Copper (10 Ω)
Analog Resolution 16 bits (7.7 mΩ/bit at 487 Ω max, 15 mΩ/bit at 1000 Ω max, 30 mΩ/bit at 2000 Ω max, 60 mΩ/bit at 4020 Ω max)
Module Scan Speeds 10 ms min (Integer Mode) / 25 ms min (Floating Point Ohms) / 50 ms min (Floating Point Temp)
Backplane Current Draw 250 mA at 5.1 VDC / 125 mA at 24 VDC (Total Power Dissipation: 4.3 Watts max)
Operating Scope & Weight 0°C to 60°C (32°F to 140°F) / Net Module Weight: Approx. 0.32 kg

Quick Installation

  • Chassis Placement: Align and firmly slide the module into any available local or remote I/O slot within the ControlLogix chassis.
  • Terminal Block Setup: Wire the sensors using a compatible 1756-TBNH or 1756-TBSH 20-pin Removable Terminal Block (RTB).
  • Multicast Configuration: Establish the proper Requested Packet Interval (RPI) and Real-Time Sampling (RTS) parameters to enable deterministic data multicasting.

Technical FAQs

Q1: What are the differences between Integer and Floating-Point data formats?
A1: Integer mode limits scaling data but processes raw readings much faster. Floating-Point mode utilizes the full internal processing library to support temperature linearization, rate alarms, and engineering unit scaling.

Q2: How does the module handle inherent line noise or minor resistance variances?
A2: A built-in digital notch filter minimizes plant electrical field noise, while an integrated 10-ohm copper offset feature compensates for small layout errors on sensitive copper RTD loops.

Q3: How does the wire-off detection feature operate?
A3: The wire-off diagnostic checks loop completeness continuously. If a connection on the terminal block is loosened or a field wire breaks, a system fault flag activates instantly to avoid inaccurate control loops.

Product Resources

📄 Download PDF
🏷️ Tags: Analog RTD Module

Skalar (V/f)

Vektor

Dikuasakan oleh AC
  • Sahkan model tepat, nombor bahagian, dan spesifikasi sebelum membuat pesanan.
  • Pastikan keserasian dengan mesin atau sistem kawalan anda sekarang.
  • Hubungi melalui sale@etowonauto.com atau +8617859788089 untuk bantuan teknikal.
  • Semak pilihan penghantaran, masa penghantaran, dan keperluan penghantaran.
  • Ikuti arahan pengeluar dan amalan terbaik semasa pemasangan.

Barangan yang ada dalam stok biasanya dihantar pada hari perniagaan yang sama. Untuk produk yang tidak tersedia dalam stok, masa penghantaran mungkin berbeza bergantung pada ketersediaan. Penghantaran antarabangsa disediakan, dan kos penghantaran dikira mengikut destinasi, berat, dan pilihan pengangkut.

Pengembalian diterima dalam tempoh 30 hari selepas penerimaan, dengan syarat barangan tidak digunakan dan dalam keadaan asal. Kos penghantaran untuk pengembalian adalah tanggungjawab pelanggan. Sila hubungi kami sebelum memulangkan sebarang barangan untuk mendapatkan kebenaran pengembalian.

Untuk maklumat lanjut, sila semak Polisi Penghantaran & Pengembalian.

 Lihat Butiran Produk

PASTIKAN PRESTASI MESIN YANG BOLEH DIPERCAYAI

Ubah rumah anda dengan penyelesaian multi-elektronik terkini, dari pencahayaan pintar hingga peranti kawalan suara — semua direka untuk memudahkan hidup, menjadikan ia lebih selamat, dan lebih berhubung. Optimumkan operasi anda dengan Sistem Pemantauan Bently Nevada 3500, yang menawarkan pemantauan getaran dan keadaan mesin secara masa nyata untuk mencegah kerosakan dan memaksimumkan masa operasi.

Beli sekarang
Nasihat teknikal langkah demi langkah dan petua pembelian untuk bahagian automasi industri.

Panduan Teknikal & Pembelian

Lihat semua blog