330101-00-40-10-02-00 Bently Nevada Vibration Probe

Bently Nevada 330101-00-40-10-02-00 Proximity Transducer

The Bently Nevada 330101-00-40-10-02-00 is a precision vibration monitoring system. It provides accurate measurement of machinery vibration and position. This transducer is made in the USA. It features a 4.0-inch case length with an unthreaded design. The total cable length is 1.0 meter (3.3 feet). It uses a reliable miniature coaxial ClickLoc™ connector.

Key Features

• Precision Monitoring: Accurately measures shaft vibration and position.
• Robust Design: Industrial-grade construction for reliable performance.
• Quick Connection: Miniature coaxial ClickLoc™ connector for easy, secure installation.
• Flexible Length: 1.0 meter standard cable suits various mounting configurations.
• Global Application: No specific agency approval required for wide usability.

Technical Specifications

• Manufacturer: Bently Nevada (Baker Hughes)
• Model: 330101-00-40-10-02-00
• Product Type: Proximity Transducer System (Eddy Current Sensor)
• Country of Origin: USA
• Case Length: 4.0 inches (101.6 mm)
• Probe Extension: 0.0 inches (Unthreaded)
• Total Assembly Length: 1.0 meter (3.3 feet)
• Connector Type: Miniature Coaxial, ClickLoc™ Style
• Cable Type: Standard Flexible Coaxial Cable
• Operating Temperature: -35°C to 177°C (-31°F to 350°F)
• Frequency Response: 0 to 10 kHz
• Output Signal: -2 to -18 VDC
• Scale Factor: 200 mV/mil (7.87 V/mm)
• Power Supply: Requires -24 VDC
• Agency Approvals: Standard Industrial

Installation and Configuration

• Install in a stable bracket near the measurement target.
• Set the initial gap voltage per system requirements.
• Ensure the target surface is clean and smooth.
• Route cable away from power lines.
• Use the ClickLoc™ connector for secure connection.

Typical Applications

• Radial vibration monitoring of turbines and compressors.
• Axial position measurement on rotating equipment.
• Shaft eccentricity analysis.
• Condition monitoring in power generation and oil & gas.

Frequently Asked Questions (FAQ)

Q: What does an "unthreaded length option" mean?

• A: It means the probe barrel has no threads. It mounts in a separate threaded holder.

Q: Is this just the probe or the entire system?

• A: This is the transducer assembly (probe + cable + connector). You need a compatible driver and monitor separately.

Q: Can I cut the cable?

• A: No. Cutting changes the electrical calibration. Use approved extension cables.