{"product_id":"vibration-probe-330104-00-12-05-02-05-bently-nevada","title":"Vibration Probe 330104-00-12-05-02-05 Bently Nevada","description":"\u003ch3\u003eBently Nevada 3300 XL 8mm Industrial Proximity Probe\u003c\/h3\u003e\n\u003cp style=\"color: #7f8c8d; font-size: 14px; margin: 8px 0;\"\u003e\u003cspan style=\"color: #27ae60;\"\u003eFull Model:\u003c\/span\u003e 330104-00-12-05-02-05\u003cspan style=\"color: #2980b9;\"\u003e Configuration:\u003c\/span\u003e 00 (0mm Unthreaded) | 12 (12mm Case) | 05 (0.5m Cable) | 05 (CSA\/ATEX\/IECEx)\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-12-05-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e8mm Industrial Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e0 mm Unthreaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCSA \/ ATEX \/ IECEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eExplosion-Proof Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eATEX Certified: II 2G Ex ia IIC T4 Ga (-40 deg C to +80 deg C)\u003c\/li\u003e\n\u003cli\u003eIECEx Compliance: Ex ia IIC T4 Gb at 30 V max\u003c\/li\u003e\n\u003cli\u003eHazardous Areas: Zone 1\/21, Group IIC gas protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvanced Protection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIngress Protection: IP69K (100 bar waterjet resistant)\u003c\/li\u003e\n\u003cli\u003eImpact Resistance: IK10 (20 J impact protection)\u003c\/li\u003e\n\u003cli\u003eEMI Shielding: 60 dB attenuation at 1 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnhanced Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable Flexibility: 15,000+ bends (EN 50396 tested)\u003c\/li\u003e\n\u003cli\u003eDielectric Strength: 1500 V AC\/min\u003c\/li\u003e\n\u003cli\u003eThermal Cycling: 500 cycles (-55 deg C to +125 deg C)\u003c\/li\u003e\n\u003cli\u003eVibration: 10-2000 Hz at 20 g (IEC 60068-2-6)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownload\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf?v=1739784146\" target=\"_blank\"\u003eAccess Detailed Product Specifications PDF\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the gap voltage target for the 3300 XL 8mm probe?\u003c\/strong\u003e\u003cbr\u003eA: The 3300 XL 8mm system is calibrated for a -10 VDC gap voltage target at approximately 1.27 mm (50 mils) from the target surface. Verify against the transducer system datasheet before commissioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the weight of the 330104-00-12-05-02-05 probe?\u003c\/strong\u003e\u003cbr\u003eA: The exact probe weight is not specified in the source data. The 8mm probe with a 0.5 m cable and 12 mm case typically falls in the low-hundreds-of-grams range. Confirm against the factory datasheet for shipping and mounting load calculations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What hazardous area approvals does this probe carry?\u003c\/strong\u003e\u003cbr\u003eA: ATEX II 2G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Gb at 30 V max, and CSA approval for Zone 1\/21 Group IIC gas protection.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the probe with the 12 mm case threaded into the machine housing or a mounting bracket. Verify the gap voltage target of -10 VDC before securing the probe locknut. Route the 0.5 m cable away from high-current power conductors. Ground the cable shield at the monitor end only. Verify hazardous area classification matches the ATEX, IECEx, or CSA marking before installation. Confirm the extension cable and proximitor match the probe system length.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51050753228932,"sku":"330104-00-12-05-02-05","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330104-00-12-05-02-05.jpg?v=1790910704","url":"https:\/\/www.etowonauto.com\/fr\/products\/vibration-probe-330104-00-12-05-02-05-bently-nevada","provider":"Etowon Auto","version":"1.0","type":"link"}