{"title":"Bently Nevada Yaxınlıq Sensorları və Kabeli","description":"\u003cp\u003eBently Nevada yaxınlıq probu və kabelləri fırlanan maşınlarda oxun vibrasiyası və yer dəyişməsinin dəqiq ölçülməsi üçün nəzərdə tutulub. Bu kateqoriyaya 3300 XL yaxınlıq probu, uzatma kabelləri və turbin, kompressor və generator monitorinq sistemlərində istifadə olunan əlaqə komponentləri daxildir. Bu hissələr neft və qaz, enerji istehsalı və ağır sənaye mühitlərində geniş tətbiq olunur, burada dəqiq təmas olmayan ölçmə maşınların qorunması və etibarlılığı üçün vacibdir.\u003c\/p\u003e","products":[{"product_id":"21504-24-64-05-02-bently-nevada-7200-series-probe","title":"21504-24-64-05-02 Bently Nevada 7200 Series Probe","description":"\u003ch2\u003eBently Nevada 21504-24-64-05-02 Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eModel: \u003cstrong\u003e21504-24-64-05-02\u003c\/strong\u003e. This 8mm proximity probe from Bently Nevada measures vibration and position in rotating machinery. Configuration: 2.4-inch unthreaded section, 6.4-inch housing, 20-inch cable with coaxial connector. Total weight: 0.59 kg (1.3 lb).\u003c\/p\u003e\n\n\u003ch3\u003eConfiguration details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e24: 2.4 inches (61.0 mm) unthreaded section.\u003c\/li\u003e\n  \u003cli\u003e64: 6.4 inches (162.6 mm) housing length.\u003c\/li\u003e\n  \u003cli\u003e05: 20 inches (0.5 m) cable assembly.\u003c\/li\u003e\n  \u003cli\u003e02: Miniature coaxial connector interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrecision measurement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSystem-calibrated linearity: 0.02 mm (±0.8 mils).\u003c\/li\u003e\n  \u003cli\u003eDetection range: 10-80 mils (0.25-2.0 mm).\u003c\/li\u003e\n  \u003cli\u003eOutput gradient: 7.87 V\/mm at 200 mV\/mil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eElectrical profile\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMax input voltage: -26 VDC.\u003c\/li\u003e\n  \u003cli\u003eCurrent draw: 12 mA nominal.\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 10 kHz flat (±5%).\u003c\/li\u003e\n  \u003cli\u003eTemperature coefficient: -396 ppm\/°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRugged construction\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 3\/8-24 UNF for secure mounting.\u003c\/li\u003e\n  \u003cli\u003eCasing: Nickel-plated brass for durability.\u003c\/li\u003e\n  \u003cli\u003eSealing: IP67 equivalent protection.\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.59 kg (1.3 lb).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEnvironmental specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProbe operation: -34°C to +177°C (-30°F to +350°F).\u003c\/li\u003e\n  \u003cli\u003eChemical resistance: 10% H₂SO₄ compatible.\u003c\/li\u003e\n  \u003cli\u003eHumidity tolerance: 95% RH non-condensing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage contents \u0026amp; shipping\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Bently Nevada 21504-24-64-05-02 proximity probe.\u003c\/li\u003e\n  \u003cli\u003eFactory packaging with documentation included.\u003c\/li\u003e\n  \u003cli\u003eShips via FedEx, UPS, or DHL with tracking.\u003c\/li\u003e\n  \u003cli\u003eAnti-static protection during transit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. What is the unthreaded section length?\u003c\/strong\u003e\u003cbr\u003e\n2.4 inches (61.0 mm) for flexible positioning.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2. What temperature range can it handle?\u003c\/strong\u003e\u003cbr\u003e\n-34°C to +177°C for probe operation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3. What is the detection range?\u003c\/strong\u003e\u003cbr\u003e\n10-80 mils (0.25-2.0 mm) measurement range.\u003c\/p\u003e\n\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/7200_Proximity_Transducer_Systems.pdf?v=1740024620\" target=\"_blank\"\u003eDownload detailed product specifications PDF\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047682211972,"sku":"21504-24-64-05-02","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/21504-24-64-05-02.jpg?v=1771934730"},{"product_id":"bently-nevada-330851-02-000-070-10-00-05-25mm-probe","title":"Bently Nevada 330851-02-000-070-10-00-05 25mm Probe","description":"\u003ch2\u003eBently Nevada 3300 XL 25mm Proximity Probe 330851-02-000-070-10-00-05\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada \u003cstrong\u003e330851-02-000-070-10-00-05\u003c\/strong\u003e is a 3300 XL 25 mm proximity probe designed for extreme temperature environments. \u003c\/p\u003e\n\u003ch3\u003eProduct Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct No.:\u003c\/strong\u003e \u003cstrong\u003e330851-02-000-070-10-00-05\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Type:\u003c\/strong\u003e M30x2 Thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Cable Length:\u003c\/strong\u003e 1.0 metre (3.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor:\u003c\/strong\u003e No Armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance (1.0m cable):\u003c\/strong\u003e 6.2 ± 0.5 ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTemperature Ratings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Operating Temperature:\u003c\/strong\u003e -55°C to +200°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort Term Peak (less than 24 hours):\u003c\/strong\u003e +250°C maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTorque Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Rated Torque:\u003c\/strong\u003e 163 N•m (120 ft•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Torque:\u003c\/strong\u003e 68 N•m (50 ft•lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Example\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMonitored 850 hours at 230°C in volcanic steam turbine without signal drift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the continuous temperature range?\u003c\/strong\u003e\u003cbr\u003e-55°C to +200°C continuous operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the DC resistance of the 1.0m cable?\u003c\/strong\u003e\u003cbr\u003e6.2 ± 0.5 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat certifications does this probe hold?\u003c\/strong\u003e\u003cbr\u003eATEX Zone 0, IECEx EPL Ga, ABS Maritime, FCC, EMC, RoHS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eShipping via FedEx, UPS, or DHL.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300-XL-25MM-Datasheet.pdf?v=1743998122\" target=\"_blank\"\u003eDownload 3300 XL 25mm Probe Detailed Specifications PDF\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047694237828,"sku":"330851-02-000-070-10-00-05","price":241.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330851-02-000-070-10-00-05.jpg?v=1775307501"},{"product_id":"330851-02-000-080-50-01-05-bently-nevada-80mm-probe","title":"330851-02-000-080-50-01-05 Bently Nevada 80mm Probe","description":"\u003ch2 id=\"product-overview\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong style=\"color: #2e86c1; font-size: 1.1em;\"\u003eBently Nevada 330851-02-000-080-50-01-05\u003c\/strong\u003e is a heavy-duty 25mm proximity probe within the 3300 XL series, specifically engineered for the most demanding industrial environments. This eddy current sensor features a reinforced 80mm armored case capable of withstanding extreme radial compression. Designed for large-scale machinery, it provides a superior linear range for vibration and position monitoring, ensuring high-fidelity data in offshore and high-pressure applications where standard sensors might fail.\u003c\/p\u003e\n\n\u003ch2 id=\"technical-configuration\"\u003eTechnical Configuration\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e \u003cspan style=\"color: #2e86c1;\"\u003e\u003cstrong\u003e330851-02-000-080-50-01-05\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProbe Diameter:\u003c\/strong\u003e 25 mm High-Performance Tip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Specification:\u003c\/strong\u003e M30 x 2 Metric Heavy-Duty Threads (02)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 0 mm Full Engagement (000)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCase Length:\u003c\/strong\u003e 80 mm Armored Case (080)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 5.0 Meters \/ 16.4 Feet (50)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector Option:\u003c\/strong\u003e Miniature Coaxial Connector with Connector Protector (01)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e Multiple Hazardous Area Approvals (05)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 id=\"technical-specifications\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; border: 1px solid #cccccc; margin-bottom: 20px;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc; background-color: #f9f9f9;\"\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc;\"\u003e12.7 mm (500 mils)\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc; background-color: #f9f9f9;\"\u003e\u003cstrong\u003ePressure Rating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc;\"\u003e100 Bar (1450 psi)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc; background-color: #f9f9f9;\"\u003e\u003cstrong\u003eTemperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc;\"\u003e-50°C to +177°C\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc; background-color: #f9f9f9;\"\u003e\u003cstrong\u003eTip Material\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc;\"\u003ePEEK Thermal Shield\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #cccccc; background-color: #f9f9f9;\"\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd colspan=\"3\" style=\"padding: 10px; border: 1px solid #cccccc;\"\u003eIECEx EPL Ga\/Gb, DNV GL Marine, API 670, IP69K\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"installation-guide\"\u003eInstallation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Torque and Armor:\u003c\/strong\u003e The \u003cspan style=\"color: #2e86c1;\"\u003e\u003cstrong\u003e330851-02-000-080-50-01-05\u003c\/strong\u003e\u003c\/span\u003e supports a high torque capacity of 163N·m. The 4mm SST armor ensures the internal sensing elements remain protected even under significant mechanical stress during installation on heavy casings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Gap Calibration:\u003c\/strong\u003e Calibrate using a 3300 XL 25mm Proximitor. Because of the large 25mm tip, ensure that the target area on the shaft is at least 1.5 times the diameter of the probe tip to avoid side-view interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Connector Protection:\u003c\/strong\u003e The \"01\" option includes a pre-installed connector protector. This is vital for maintaining the 100Bar pressure resistance and ensuring signal continuity in submersed or fluid-heavy environments.\u003c\/p\u003e\n\n\u003ch2 id=\"engineering-advantages\"\u003eEngineering Advantages\u003c\/h2\u003e\n\u003cp\u003eThis 25mm system is the industry benchmark for monitoring shaft axial displacement and vibration on large steam turbines and generators. The PEEK thermal shield and MIL-STD-810H shock rating allow the \u003cspan style=\"color: #2e86c1;\"\u003e\u003cstrong\u003e330851-02-000-080-50-01-05\u003c\/strong\u003e\u003c\/span\u003e to operate reliably in the presence of extreme thermal cycling and mechanical transients. Its compliance with DNV GL standards makes it a top-tier choice for offshore platforms and maritime propulsion systems where salt-spray resilience (ISO 14993) is mandatory.\u003c\/p\u003e\n\n\u003ch2 id=\"technical-faqs\"\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What does the \"01\" connector option provide?\u003c\/strong\u003e\u003cbr\u003e\nA1: The \"01\" option includes a miniature coaxial connector with a connector protector, essential for achieving the full IP69K ingress protection rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Can this probe handle extreme cold starts?\u003c\/strong\u003e\u003cbr\u003e\nA2: Yes, the probe is tested for immediate startup at temperatures as low as -50°C, making it suitable for arctic and high-altitude industrial sites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Is a special proximitor required?\u003c\/strong\u003e\u003cbr\u003e\nA3: Yes, you must pair this with the Bently Nevada 3300 XL 25mm Proximitor Sensor. It is not compatible with standard 8mm Proximitors.\u003c\/p\u003e\n\n\u003ch2 id=\"download\"\u003eDownload Resource\u003c\/h2\u003e\n\u003cp style=\"margin-top: 20px;\"\u003e\n  \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_Proximity_Transducer_System.pdf?v=1741578115\" target=\"_blank\" style=\"display: inline-block; padding: 10px 20px; background-color: #2e86c1; color: #ffffff; text-decoration: none; border-radius: 4px; font-weight: bold;\"\u003e\n    Access Detailed Product Specifications PDF\n  \u003c\/a\u003e\n\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047694270596,"sku":"330851-02-000-080-50-01-05","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330851-02-000-080-50-01-05.jpg?v=1775980885"},{"product_id":"probe-330851-02-000-080-10-01-05-proximity-bently-nevada","title":"Probe 330851-02-000-080-10-01-05 Proximity | Bently Nevada","description":"\u003ch2\u003eBently Nevada 330851-02-000-080-10-01-05 3300 XL 25 mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330851-02-000-080-10-01-05\u003c\/strong\u003e is a 3300 XL 25 mm proximity probe with heavy-duty armor. Features 1.2mm thick SST shielding and 80mm extended case length.\u003c\/p\u003e\n\u003ch2\u003eConfiguration highlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor:\u003c\/strong\u003e 1.2mm thick SST shielding (code 01)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 80mm extended housing (code 080)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread lock:\u003c\/strong\u003e M30x2 with Loctite-compatible coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 1.0 meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 kg (approx)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eElectrical performance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6.2Ω (±0.5Ω) DC resistance at 20°C\u003c\/li\u003e\n\u003cli\u003e75Ω impedance with ±1.5% frequency variation (2-10kHz)\u003c\/li\u003e\n\u003cli\u003e1500V AC isolation between core and shield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncludes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330851-02-000-080-10-01-05\u003c\/strong\u003e proximity probe\u003c\/li\u003e\n\u003cli\u003eFactory packaging\u003c\/li\u003e\n\u003cli\u003e12-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFedEx, UPS, DHL\u003c\/li\u003e\n\u003cli\u003eTracking provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca style=\"color: #0066cc;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_Proximity_Transducer_System.pdf?v=1741578115\" target=\"_blank\"\u003e📥 Access Detailed Product Specifications PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armor protection does this model have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1.2mm thick SST shielding with 3-layer braided stainless steel cable armor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impact rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e50J impact rating per IEC 60068-2-75.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat corrosion testing has it passed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1000-hour salt spray test for harsh environment durability.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047694434436,"sku":"330851-02-000-080-10-01-05","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330851-02-000-080-10-01-05.jpg?v=1774881226"},{"product_id":"bently-nevada-3300-nsv-probe-330901-00-32-05-02-00","title":"Bently Nevada 3300 NSv Probe 330901-00-32-05-02-00","description":"\u003ch2 style=\"color: #2c3e50; text-align: center; margin-bottom: 20px; font-size: 30px;\"\u003eBently Nevada 330901-00-32-05-02-00 3300 NSv Proximity Probe\u003c\/h2\u003e\n\u003ch3 style=\"color: #1e88e5; margin-bottom: 15px;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Number:\u003c\/strong\u003e 330901-00-32-05-02-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3300 NSv Proximity Probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e 3300 NSv Probe, 1\/4-28 UNF thread, without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 14 to 150 g (0.5 to 5.3 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #ffb300; margin-bottom: 15px;\"\u003eDimensions \u0026amp; Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 0.0 in (-00)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 3.2 in (81.3 mm) (-32)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 0.5 meter (20 in) (-05)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Miniature coaxial ClickLoc connector, standard cable (-02)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e Not required (-00)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047698169988,"sku":"330901-00-32-05-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330901-00-32-05-02-00.jpg?v=1774620946"},{"product_id":"bently-nevada-3300-nsv-armored-cable-330930-060-04-00","title":"Bently Nevada 3300 NSv Armored Cable | 330930-060-04-00","description":"\u003ch2\u003eBently Nevada 3300 NSv Armored Cable: Maximum Protection for Industrial Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBently Nevada 330930-060-04-00\u003c\/strong\u003e armored extension cable delivers reliable performance in toughest conditions. This 6-meter cable features \u003cspan style=\"color: #2980b9;\"\u003econnector protectors\u003c\/span\u003e and advanced FEP insulation. Perfect for nuclear plants, oil rigs, and mining operations. Made in USA with quality materials.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmored Design\u003c\/strong\u003e: Stainless steel protection against physical damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Temperature Range\u003c\/strong\u003e: Performs from \u003cspan style=\"color: #27ae60;\"\u003e-51°C to +177°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e: FEP jacket withstands harsh chemicals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Protection\u003c\/strong\u003e: Built-in connector protectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Connectors\u003c\/strong\u003e: Gold-plated brass for optimal signal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e: \u003cstrong\u003e330930-060-04-00\u003c\/strong\u003e (Complete suffix information)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 6.0 meters \/ 19.7 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Range\u003c\/strong\u003e: 0.25-1.75mm (10-70 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Signal\u003c\/strong\u003e: -1 to -13 Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Gap\u003c\/strong\u003e: 1.0mm (40 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance\u003c\/strong\u003e: 75Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacitance\u003c\/strong\u003e: 69.9 pF\/m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.5 kg shipping weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCombine probe and extension cable for total sensor length\u003c\/li\u003e\n\u003cli\u003eMaximum field wiring: 305 meters with triad shielded cable\u003c\/li\u003e\n\u003cli\u003eAlways use connector protectors in high-vibration areas\u003c\/li\u003e\n\u003cli\u003eEnsure proper gap setting: 1.0mm recommended\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer's torque specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents \u0026amp; Warranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6-meter armored cable with connector protectors\u003c\/li\u003e\n\u003cli\u003eFEP outer jacket for maximum protection\u003c\/li\u003e\n\u003cli\u003eOptional COO document upon request\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Year Manufacturer Warranty\u003c\/strong\u003e included\u003c\/li\u003e\n\u003cli\u003eQuality guaranteed by Bently Nevada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 220N rating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Conductor\u003c\/strong\u003e: 0.220 Ω\/m resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Resistance\u003c\/strong\u003e: 0.066 Ω\/m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Integrity\u003c\/strong\u003e: Maintains accuracy over long distances\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Survives extreme industrial conditions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047699513476,"sku":"330930-060-04-00","price":208.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330930-060-04-00.jpg?v=1760765629"},{"product_id":"3300-nsv-probe-330903-00-02-05-11-00-bently-nevada","title":"3300 NSv Probe 330903-00-02-05-11-00 Bently Nevada","description":"\u003ch2\u003eBently Nevada 330903-00-02-05-11-00 3300 NSv Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330903-00-02-05-11-00\u003c\/strong\u003e is a 3300 NSv proximity probe with FluidLoc cable and connector protector. \u003c\/p\u003e\n\u003ch2\u003ePart configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 330903-00-02-05-11-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e3300 NSv Proximity Probe\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8X1, without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length:\u003c\/strong\u003e 0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall case length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal length:\u003c\/strong\u003e 0.5 meter (20 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc with connector protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable type:\u003c\/strong\u003e FluidLoc cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 kg (approx)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncludes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330903-00-02-05-11-00\u003c\/strong\u003e probe with FluidLoc cable\u003c\/li\u003e\n\u003cli\u003eConnector protector\u003c\/li\u003e\n\u003cli\u003eFactory packaging\u003c\/li\u003e\n\u003cli\u003e12-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFedEx, UPS, DHL\u003c\/li\u003e\n\u003cli\u003eTracking provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is FluidLoc cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecial fluid-resistant cable construction for harsh environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLinear range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1.5 mm (60 mils) from 0.25 to 1.75 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with existing systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Compatible with 3300 RAM extension cables and monitors.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047699611780,"sku":"330903-00-02-05-11-00","price":196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330903-00-02-05-11-00.jpg?v=1773317484"},{"product_id":"330910-06-25-05-11-00-bently-nevada-armored-0-5m-probe","title":"330910-06-25-05-11-00 Bently Nevada | Armored 0.5m Probe","description":"\u003ch2\u003e330910-06-25-05-11-00 Bently Nevada | 3300 NSv FluidLoc Armored Probe 0.5m\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e330910-06-25-05-11-00\u003c\/strong\u003e is an armored proximity probe from Bently Nevada 3300 NSv series with FluidLoc cable. 0.5m length, 60mm unthreaded, 250mm case.\u003c\/p\u003e\n\u003ch3\u003e▸ Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330910\u003c\/strong\u003e - M10x1 thread, with armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length:\u003c\/strong\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal cable:\u003c\/strong\u003e 0.5 meter (20 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e ClickLoc with protector, FluidLoc cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e Not required (-00)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ Electrical \u0026amp; Mechanical\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC resistance (0.5m):\u003c\/strong\u003e 4.0 ±0.5 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip material:\u003c\/strong\u003e PPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase material:\u003c\/strong\u003e AISI 304 SST with armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75Ω coaxial, FluidLoc type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin bend radius:\u003c\/strong\u003e 25.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax torque:\u003c\/strong\u003e 0.56 N•m (finger tight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase torque max\/rec:\u003c\/strong\u003e 33.9 \/ 11.3 N•m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax thread engagement:\u003c\/strong\u003e 15 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14-150 g (0.5-5.3 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ Shipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFedEx, UPS, DHL worldwide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. What is FluidLoc cable?\u003c\/strong\u003e\u003cbr\u003eSpecial fluid-resistant construction for harsh environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Unthreaded and case lengths?\u003c\/strong\u003e\u003cbr\u003e60mm unthreaded, 250mm overall case length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Temperature range?\u003c\/strong\u003e\u003cbr\u003e-52°C to +177°C. Avoid sustained below -34°C.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047700201604,"sku":"330910-06-25-05-11-00","price":182.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330910-06-25-05-11-00.jpg?v=1773403892"},{"product_id":"330904-00-25-05-02-05-bently-nevada-nsv-probe","title":"330904-00-25-05-02-05 | Bently Nevada NSv Probe","description":"\u003ch2\u003e330904-00-25-05-02-05 Bently Nevada | 3300 NSv M8x1 Armored Probe 250mm Long Case\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e330904-00-25-05-02-05\u003c\/strong\u003e is an armored proximity probe from Bently Nevada 3300 NSv series with M8x1 thread and multiple agency approvals. 0.5m length, 250mm extended case. \u003c\/p\u003e\n\u003ch3\u003e▸ Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330904\u003c\/strong\u003e - M8x1 thread, \u003cspan style=\"color: #c7254e;\"\u003ewith armor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length:\u003c\/strong\u003e 0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 250 mm (extended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal cable:\u003c\/strong\u003e 0.5 meter (20 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e Multiple (-05)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ Key Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear range:\u003c\/strong\u003e 1.5 mm (60 mils) from 0.25-1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale factor:\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±12.5%\/-20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation:\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 0-10 kHz, +0\/-3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC resistance:\u003c\/strong\u003e 4.0 ±0.5 Ω (0.5m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended gap:\u003c\/strong\u003e 1.0 mm (40 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 150g (5.3 oz) max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ Shipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFedEx, UPS, DHL worldwide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047700988036,"sku":"330904-00-25-05-02-05","price":191.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330904-00-25-05-02-05.jpg?v=1773839872"},{"product_id":"bently-nevada-3300-nsv-probe-m10x1-330905-05-08-10-12-05","title":"Bently Nevada 3300 NSv Probe M10X1 - 330905-05-08-10-12-05","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong style=\"color: #003366;\"\u003e330905-05-08-10-12-05\u003c\/strong\u003e is a premium 3300 NSv Proximity Probe engineered for industrial machinery where space is limited and high-accuracy vibration or position data is critical. This M10X1 threaded probe, weighing approximately 0.32 kg, features enhanced chemical resistance compared to legacy models, making it ideal for process compressor applications. Its superior side-view characteristics allow for precise gapping even in confined targets. Every unit arrives in original factory packing, backed by a 12-month warranty to ensure maximum reliability for your asset protection system.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Configuration\u003c\/h2\u003e\n\u003ch3\u003eOrdering Code Logic\u003c\/h3\u003e\n\u003cp\u003eThis specific configuration includes a 50mm unthreaded length and an 80mm overall case length. The system utilizes a 1.0-meter total length cable equipped with a Miniature coaxial ClickLoc connector and FluidLoc technology to prevent oil migration. The Multiple Approvals option (-05) ensures global compliance for various industrial standards.\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Material Science\u003c\/h3\u003e\n\u003cp\u003eThe probe tip consists of high-grade Polyphenylene Sulfide (PPS), while the case utilizes AISI 304 Stainless Steel (SST). This combination provides a rugged interface capable of operating in extreme temperatures ranging from -52°C to +177°C. The FEP-insulated coaxial cable maintains signal integrity even in oily or chemically aggressive environments.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-top: 10px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f2f2f2;\"\u003e\n      \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePart Number\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e330905-05-08-10-12-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0.32 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLinear Range\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1.5 mm (60 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eScale Factor (ISF)\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eThread Size\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eM10 X 1 (without armor)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFrequency Response\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0 to 10 kHz (+0, -3 dB)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRecommended Gap\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1.0 mm (40 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eOperating Temp\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e-52°C to +177°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eInstallation \u0026amp; Maintenance Guide\u003c\/h2\u003e\n\u003cp\u003eInstall the probe by tightening the M10X1 case to the recommended torque of 7.5 N•m (66 in•lb) for the first three threads. Ensure the center conductor dc resistance measures 4.2 ± 0.5 ohms for a 1.0m probe to verify electrical integrity. Maintain a minimum bend radius of 25.4 mm (1.0 in) for the coaxial cable to prevent signal degradation. When gapping against targets smaller than 13mm, reduce the gap setting slightly to maintain scale factor accuracy.\u003c\/p\u003e\n\n\u003ch2\u003eEngineering Advantages\u003c\/h2\u003e\n\u003cp\u003eThe 3300 NSv series offers complete mechanical and electrical interchangeability with previous 3300 RAM systems, allowing for seamless upgrades. Its Viton O-ring seal provides a robust differential pressure barrier between the tip and case. The ClickLoc connector system ensures a secure, vibration-proof connection that is vital for continuous machinery monitoring in high-vibration environments.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: Is the 330905-05-08-10-12-05 compatible with 3300 RAM cables?\u003c\/strong\u003e\u003cbr\u003e\nA1: Yes, the NSv probe is mechanically and electrically interchangeable with the legacy 3300 RAM series components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: What is the benefit of the FluidLoc cable option?\u003c\/strong\u003e\u003cbr\u003e\nA2: The FluidLoc cable prevents oil and other process fluids from leaking through the cable interior, protecting the Proximitor sensor environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Can this probe be used on very small shafts?\u003c\/strong\u003e\u003cbr\u003e\nA3: While recommended for targets above 13mm, it performs better on small shafts than the 3000-series probes. Reducing the gap setting helps maintain the scale factor on smaller diameters.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047701315716,"sku":"330905-05-08-10-12-05","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330905-05-08-10-12-05.jpg?v=1777299660"},{"product_id":"330904-04-14-05-02-00-bently-nevada-armored-probe","title":"330904-04-14-05-02-00 | Bently Nevada Armored Probe","description":"\u003ch2\u003e330904-04-14-05-02-00 Bently Nevada | 3300 NSv M8x1 Armored Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e330904-04-14-05-02-00\u003c\/strong\u003e is an armored proximity probe from Bently Nevada 3300 NSv series with M8x1 thread. 0.5m length, 40mm unthreaded, 140mm case.\u003c\/p\u003e\n\u003ch3\u003e▸ Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330904\u003c\/strong\u003e - M8x1 thread, \u003cspan style=\"color: #c7254e;\"\u003ewith armor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 140 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal cable:\u003c\/strong\u003e 0.5 meter (20 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e Not required (-00)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ Key Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear range:\u003c\/strong\u003e 1.5 mm (60 mils) from 0.25-1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale factor:\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±12.5%\/-20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation:\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 0-10 kHz, +0\/-3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC resistance:\u003c\/strong\u003e 4.0 ±0.5 Ω (0.5m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended gap:\u003c\/strong\u003e 1.0 mm (40 mils)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Is this probe armored?\u003c\/strong\u003e\u003cbr\u003eYes, 330904 model includes stainless steel armor for mechanical protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. What is the unthreaded length?\u003c\/strong\u003e\u003cbr\u003e40mm unthreaded section for flexible positioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Temperature range?\u003c\/strong\u003e\u003cbr\u003e-52°C to +177°C operating and storage.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047701741700,"sku":"330904-04-14-05-02-00","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330904-04-14-05-02-00.jpg?v=1773838897"},{"product_id":"bently-nevada-330901-00-32-05-02-cn-clickloc-probe","title":"Bently Nevada 330901-00-32-05-02-CN | ClickLoc Probe","description":"\u003ch2 style=\"color: #2e86ab;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp style=\"color: #333; line-height: 1.6;\"\u003eThe \u003cstrong style=\"color: #003366;\"\u003e330901-00-32-05-02-CN\u003c\/strong\u003e is a high-precision 3300 NSv Proximity Probe from Bently Nevada, specifically designed for applications where space constraints require a smaller sensor footprint. This 1\/4-28 UNF threaded probe features a 3.2-inch case length and a 0.5-meter (20 in) total cable length equipped with a miniature coaxial ClickLoc connector. With an \u003cstrong\u003eapproximate weight ranging from 14 g to 150 g\u003c\/strong\u003e (0.5 to 5.3 oz) depending on the configuration, it provides a lightweight yet durable solution for critical vibration and position measurements. Constructed with an AISI 304 stainless steel case and a Polyphenylene sulfide (PPS) tip, this probe is built to perform in the most demanding industrial environments.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #2e86ab;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 15px 0;\"\u003e\n  \u003ctr style=\"background-color: #f8f9fa;\"\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eBrand \/ Origin\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eBently Nevada \/ Made in U.S.A.\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eModel Number\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e330901-00-32-05-02-CN\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr style=\"background-color: #f8f9fa;\"\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eThread Size\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e1\/4-28 UNF\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eProduct Weight\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e14 g to 150 g (0.5 to 5.3 oz)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr style=\"background-color: #f8f9fa;\"\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eDimensions\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e3.2 in Case \/ 0.5 m Total Cable\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eConnector\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eMiniature Coaxial ClickLoc\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr style=\"background-color: #f8f9fa;\"\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eOperating Temp\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd; font-weight: bold;\"\u003eDC Resistance\u003c\/td\u003e\n    \u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e4.0 ± 0.5 ohms (at 0.5m)\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #2e86ab;\"\u003eEngineering Advantages\u003c\/h2\u003e\n\u003cul style=\"color: #333; line-height: 1.8;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLightweight Design:\u003c\/strong\u003e At a \u003cstrong\u003emaximum weight of 150 g\u003c\/strong\u003e, this probe minimizes mechanical loading on sensitive mounting brackets while maintaining industrial-grade durability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRugged Material Composition:\u003c\/strong\u003e The PPS tip and 304 stainless steel case ensure resistance to chemical exposure and physical wear in high-speed machinery.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Reliability:\u003c\/strong\u003e Designed to operate up to 177°C, though users should be aware that sustained temperatures below -34°C may affect the Viton O-ring pressure seal.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandardized Connectivity:\u003c\/strong\u003e The 75 Ω coaxial FEP-insulated cable and ClickLoc connector provide a consistent, low-noise signal path to the proximitor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #2e86ab;\"\u003eInstallation \u0026amp; Torque Requirements\u003c\/h2\u003e\n\u003cp style=\"color: #333; line-height: 1.6;\"\u003eWhen installing the \u003cstrong style=\"color: #003366;\"\u003e330901-00-32-05-02-CN\u003c\/strong\u003e, the maximum thread engagement is limited to 0.375 inches. It is essential to use the recommended torque of 5.1 N•m (45 in•lb) to ensure a secure fit; do not exceed 7.3 N•m (65 in•lb). Despite its \u003cstrong\u003ecompact 14–150 g weight\u003c\/strong\u003e, the probe is engineered to handle differential pressure via its integrated Viton O-ring, though it is not pressure-tested prior to delivery. Proper torque ensures the AISI 304 SST case maintains structural integrity during high-vibration operation.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #2e86ab;\"\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp style=\"color: #333;\"\u003e\u003cstrong\u003eQ1: What is the significance of the \"CN\" approval?\u003c\/strong\u003e\u003cbr\u003e\nA1: The \"CN\" suffix indicates country-specific agency approvals, ensuring the probe meets local regulatory standards for industrial and hazardous location use.\u003c\/p\u003e\n\n\u003cp style=\"color: #333;\"\u003e\u003cstrong\u003eQ2: Does the weight include the cable and connector?\u003c\/strong\u003e\u003cbr\u003e\nA2: Yes, the \u003cstrong\u003e14 g to 150 g weight range\u003c\/strong\u003e accounts for the probe assembly, including the 0.5-meter cable and the ClickLoc connector.\u003c\/p\u003e\n\n\u003cp style=\"color: #333;\"\u003e\u003cstrong\u003eQ3: Is this probe compatible with standard 3300 XL Proximitors?\u003c\/strong\u003e\u003cbr\u003e\nA3: The 3300 NSv series is typically used with specific NSv Proximitor sensors to ensure correct scale factors, as it is designed for different target sizes than standard 8mm systems.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047701774468,"sku":"330901-00-32-05-02-CN","price":113.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330901-00-32-05-02-CN.jpg?v=1778331957"},{"product_id":"330910-00-18-10-02-00-bently-nevada-3300-nsv-armored-probe","title":"330910-00-18-10-02-00 | Bently Nevada 3300 NSv Armored Probe","description":"\u003ch2\u003e330910-00-18-10-02-00 Bently Nevada 3300 NSv Armored Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e330910-00-18-10-02-00\u003c\/strong\u003e is an armored \u003cstrong\u003e3300 NSv Proximity Probe\u003c\/strong\u003e from Bently Nevada. Features M10x1 thread with 180mm case length and 1.0m cable. \u003c\/p\u003e\n\u003ch2\u003eOrdering Configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330910\u003c\/strong\u003e - 3300 NSv Probe, M10x1 thread, \u003cspan style=\"color: #c7254e;\"\u003ewith armor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Length:\u003c\/strong\u003e 180 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 1.0 meter (39 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc with standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e Not required (-00)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.2 ±0.5 ohms (1.0m length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75Ω coaxial, FEP insulated, 1.0m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Torque:\u003c\/strong\u003e 0.56 N•m (5 in•lb) finger tight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Torque Rating:\u003c\/strong\u003e 33.9 N•m max, 11.3 N•m recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Thread Engagement:\u003c\/strong\u003e 15 mm (M10x1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 to 150 g (0.5 to 5.3 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTemperature Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temp:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temp:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #c7254e;\"\u003eWarning:\u003c\/span\u003e Sustained exposure below -34°C (-30°F) may cause premature pressure seal failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFedEx, UPS, DHL worldwide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003e1. What is the difference between \u003cstrong\u003e330910-00-18-10-02-00\u003c\/strong\u003e and standard 330905 models?\u003c\/h3\u003e\n\u003cp\u003eThis is an armored version (330910) with stainless steel armor for enhanced mechanical protection.\u003c\/p\u003e\n\u003ch3\u003e2. What is the maximum thread engagement?\u003c\/h3\u003e\n\u003cp\u003e15 mm maximum for M10x1 thread engagement.\u003c\/p\u003e\n\u003ch3\u003e3. What are the temperature limits?\u003c\/h3\u003e\n\u003cp\u003e-52°C to +177°C operating and storage. Avoid prolonged exposure below -34°C.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047702036612,"sku":"330910-00-18-10-02-00","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330910-00-18-10-02-00-2.jpg?v=1773401504"},{"product_id":"bently-nevada-330904-00-07-10-02-05-nsv-probe","title":"Bently Nevada 330904-00-07-10-02-05 NSv Probe","description":"\u003ch2 style=\"text-align: center; color: #333; font-weight: bold;\"\u003eBently Nevada 330904-00-07-10-02-05 3300 NSv Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eBently Nevada \u003cstrong\u003e330904-00-07-10-02-05\u003c\/strong\u003e 3300 NSv proximity probe. M8X1 threaded with armor, 1.0m standard cable, ClickLoc connector, multiple approvals. \u003c\/p\u003e\n\u003ch3 style=\"color: #333;\"\u003eOrdering Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e330904-00-07-10-02-05\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 330904 - 3300 NSv Probe, M8X1 thread, with armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 00 - 0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 07 - 70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 10 - 1.0 metre (39 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e 02 - Miniature coaxial ClickLoc connector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e 05 - Multiple Approvals\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #333;\"\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Thread type and cable?\u003c\/strong\u003e\u003cbr\u003eA: M8X1 threaded with armor, 1.0m standard cable, ClickLoc connector, multiple approvals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Temperature and range?\u003c\/strong\u003e\u003cbr\u003eA: -52°C to +177°C operating, 1.5mm linear range (0.25-1.75mm), ISF 7.87 V\/mm, 4.2Ω resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Weight and torque specs?\u003c\/strong\u003e\u003cbr\u003eA: 14-150g typical. M8X1 case torque: max 7.3 N•m, rec 5.1 N•m, max thread engagement 12mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eContact: \u003ca href=\"mailto:sale@etowonauto.com\" style=\"color: #333; font-weight: bold;\"\u003esale@etowonauto.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047702724740,"sku":"330904-00-07-10-02-05","price":188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330904-00-07-10-02-05.jpg?v=1773933320"},{"product_id":"armored-probe-330904-00-10-05-02-05-bently-nevada","title":"Armored Probe 330904-00-10-05-02-05 Bently Nevada","description":"\u003ch2\u003e330904-00-10-05-02-05 Bently Nevada\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e330904-00-10-05-02-05\u003c\/strong\u003e is an armored proximity probe from Bently Nevada 3300 NSv series with M8x1 thread and multiple agency approvals. 0.5m length, 100mm case. \u003c\/p\u003e\n\u003ch3\u003e▸ Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330904\u003c\/strong\u003e - M8x1 thread, \u003cspan style=\"color: #c7254e;\"\u003ewith armor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length:\u003c\/strong\u003e 0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal cable:\u003c\/strong\u003e 0.5 meter (20 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e Multiple (-05)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 150g (5.3 oz) max\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047702757508,"sku":"330904-00-10-05-02-05","price":166.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330904-00-10-05-02-05.jpg?v=1773840093"},{"product_id":"330904-05-14-05-02-05-bently-nevada-proximity-probes","title":"330904-05-14-05-02-05 Bently Nevada Proximity Probes","description":"\u003ch2\u003e330904-05-14-05-02-05 Bently Nevada | 3300 NSv M8x1 Armored Probe with Multiple Approvals\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e330904-05-14-05-02-05\u003c\/strong\u003e is an armored proximity probe from Bently Nevada 3300 NSv series with M8x1 thread and multiple agency approvals. 0.5m length, 50mm unthreaded, 140mm case.\u003c\/p\u003e\n\u003ch3\u003e▸ Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330904\u003c\/strong\u003e - M8x1 thread, \u003cspan style=\"color: #c7254e;\"\u003ewith armor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length:\u003c\/strong\u003e 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase length:\u003c\/strong\u003e 140 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal cable:\u003c\/strong\u003e 0.5 meter (20 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e Multiple (-05)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ Electrical \u0026amp; Mechanical\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip material:\u003c\/strong\u003e PPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase material:\u003c\/strong\u003e AISI 304 SST with armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75Ω coaxial, FEP insulated, standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin bend radius:\u003c\/strong\u003e 25.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax torque:\u003c\/strong\u003e 0.56 N•m (finger tight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase torque max\/rec (M8x1):\u003c\/strong\u003e 7.3 \/ 5.1 N•m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax thread engagement (M8x1):\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 150g (5.3 oz) max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e▸ FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. What approvals does this probe have?\u003c\/strong\u003e\u003cbr\u003eMultiple agency certifications (-05) for international use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Is this probe armored?\u003c\/strong\u003e\u003cbr\u003eYes, 330904 model includes stainless steel armor for mechanical protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Temperature range?\u003c\/strong\u003e\u003cbr\u003e-52°C to +177°C operating and storage.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047704264836,"sku":"330904-05-14-05-02-05","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330904-05-14-05-02-05.jpg?v=1773838701"},{"product_id":"11mm-cable-bently-nevada-330730-040-02-cn","title":"11mm Cable | Bently Nevada 330730-040-02-CN","description":"\u003ch3\u003eBently Nevada 330730-040-02-CN - 3300 XL 11mm Extension Cable\u003c\/h3\u003e\n\u003cp\u003eThis heavy-duty extension cable from \u003cstrong\u003eBently Nevada\u003c\/strong\u003e delivers reliable performance in extreme industrial conditions. The \u003cstrong\u003e330730-040-02-CN\u003c\/strong\u003e model is built to maintain precise signal transmission where it matters most.\u003c\/p\u003e\n\u003ch4\u003eProduct Overview\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Construction:\u003c\/strong\u003e Made in USA with quality materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Compatibility:\u003c\/strong\u003e Designed for 3300 XL monitoring systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Design:\u003c\/strong\u003e Handles tough industrial environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Ensures accurate data transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel Number: \u003cspan style=\"color: #ff6600;\"\u003e330730-040-02-CN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e4.0 meters (13.1 feet)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e-51°C to +177°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Capacitance:\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e69.9 pF\/m (21.3 pF\/ft)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e330 N (75 pounds)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Weight:\u003c\/strong\u003e Standard 45 g\/m, Armored 140 g\/m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluidLoc Technology:\u003c\/strong\u003e Prevents internal fluid migration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Protection:\u003c\/strong\u003e Connector protector for moisture resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Sealing Kit:\u003c\/strong\u003e Includes silicone tape for environmental sealing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Insulation:\u003c\/strong\u003e 75 Ω triaxial FEP construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor Option:\u003c\/strong\u003e Available with stainless steel armor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all 3300 XL 11mm systems\u003c\/li\u003e\n\u003cli\u003eMaximum wiring length: 305 meters (1000 feet)\u003c\/li\u003e\n\u003cli\u003eRecommended gap setting: 2.5 mm (100 mils)\u003c\/li\u003e\n\u003cli\u003eLinear range: 4.0 mm from 0.5 mm starting point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eQuality Assurance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured under strict quality standards\u003c\/li\u003e\n\u003cli\u003eTested for reliable performance\u003c\/li\u003e\n\u003cli\u003e1-year manufacturer warranty included\u003c\/li\u003e\n\u003cli\u003eMultiple agency approvals available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSupport \u0026amp; Documentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTechnical support: \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct specifications: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_11_mm_Proximity_Transducer_System_Datasheet.pdf?v=1740617542\" target=\"_blank\"\u003eDownload Detailed PDF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047704887428,"sku":"330730-040-02-CN","price":232.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330730-040-02-CN.jpg?v=1759736907"},{"product_id":"bently-nevada-330730-080-02-cn-3300-xl-extension-cable","title":"Bently Nevada 330730-080-02-CN | 3300 XL Extension Cable","description":"\u003ch3\u003eBently Nevada 330730-080-02-CN Extension Cable\u003c\/h3\u003e\n\u003cp\u003eThis professional-grade extension cable from \u003cstrong\u003eBently Nevada\u003c\/strong\u003e delivers reliable performance for precision industrial monitoring. The \u003cstrong\u003e330730-080-02-CN\u003c\/strong\u003e model is engineered for accurate signal transmission in demanding environments with country-specific certifications.\u003c\/p\u003e\n\u003ch4\u003eProduct Overview\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Quality:\u003c\/strong\u003e Manufactured in the U.S.A. to strict standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Length:\u003c\/strong\u003e 8.0 meters (26.2 feet) for flexible installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification Ready:\u003c\/strong\u003e Country-specific agency approvals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Designed for 3300 XL 11 mm monitoring systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel Number: \u003cspan style=\"color: #ff6600;\"\u003e330730-080-02-CN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Capacitance:\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e69.9 pF\/m (21.3 pF\/ft)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 2.0 ± 0.5 Ω core-to-core, 0.6 ± 0.2 Ω jacket-to-jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Construction:\u003c\/strong\u003e 75 Ω triaxial with FEP insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Options:\u003c\/strong\u003e 45 g\/m unarmored, 140 g\/m armored\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Thread Types:\u003c\/strong\u003e ½-20, 5⁄8-18, M14, M16 compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material:\u003c\/strong\u003e PPS construction for wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Compatibility:\u003c\/strong\u003e 16-24 AWG (0.2-1.5 mm²) shielded cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Distance:\u003c\/strong\u003e 305 meters (1,000 feet) system length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 4.0 mm (160 mils) measurement capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Setting:\u003c\/strong\u003e Recommended 2.5 mm (100 mils)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCertifications \u0026amp; Quality\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCountry-specific agency approvals\u003c\/li\u003e\n\u003cli\u003eCertificate of Origin available\u003c\/li\u003e\n\u003cli\u003eFactory calibration to AISI 4140 steel\u003c\/li\u003e\n\u003cli\u003eCustom material calibration options\u003c\/li\u003e\n\u003cli\u003e1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the cable length?\u003c\/strong\u003e This model is 8.0 meters (26.2 feet) long.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat certifications does it have?\u003c\/strong\u003e Country-specific approvals for target markets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty is provided?\u003c\/strong\u003e Complete 1-year manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSupport \u0026amp; Documentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eComplete specifications: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_11_mm_Proximity_Transducer_System_Datasheet.pdf?v=1740617542\" target=\"_blank\"\u003eDownload Product Datasheet PDF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTechnical support: \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047704920196,"sku":"330730-080-02-CN","price":221.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330730-080-02-CN.jpg?v=1759845626"},{"product_id":"330101-00-11-10-02-00-bently-nevada-proximity-probe-200mv","title":"330101-00-11-10-02-00 Bently Nevada Proximity Probe 200mV","description":"\u003ch2\u003eBently Nevada 330101-00-11-10-02-00 – 3300 XL 8mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-11-10-02-00 is a 3300 XL series 8 mm proximity probe made in USA with 3\/8-24 UNF thread without armor. It features 0.0 inch unthreaded length and 1.1 inch overall case length. This probe includes 1.0 metre standard cable with miniature coaxial ClickLoc connector and optional Certificate of Origin available.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Bently Nevada\u003c\/li\u003e\n\u003cli\u003eProduct Number: 330101-00-11-10-02-00\u003c\/li\u003e\n\u003cli\u003eProduct Type: 3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (COO available)\u003c\/li\u003e\n\u003cli\u003eUnthreaded Length: 0.0 inch\u003c\/li\u003e\n\u003cli\u003eOverall Case Length: 1.1 inch\u003c\/li\u003e\n\u003cli\u003eTotal Cable Length: 1.0 metre (3.3 feet)\u003c\/li\u003e\n\u003cli\u003eConnector Type: Miniature coaxial ClickLoc connector, standard cable\u003c\/li\u003e\n\u003cli\u003eAgency Approval: Not required\u003c\/li\u003e\n\u003cli\u003eProbe Tip Material: Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003eProbe Case Material: AISI 303 or 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.323 kg (0.71 lbs) per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNominal Probe DC Resistance: 7.59 ± 0.50 ohms for 1.0m\u003c\/li\u003e\n\u003cli\u003eExtension Cable Capacitance: 69.9 pF\/m (21.3 pF\/ft) typical\u003c\/li\u003e\n\u003cli\u003eField Wiring: 0.2 to 1.5 mm² (16 to 24 AWG), 3 conductor shielded triad recommended\u003c\/li\u003e\n\u003cli\u003eMaximum Field Wiring Length: 305 metres (1000 feet)\u003c\/li\u003e\n\u003cli\u003eLinear Range: 2 mm (80 mils) from 0.25 to 2.3 mm (10 to 90 mils)\u003c\/li\u003e\n\u003cli\u003eRecommended Gap Setting for Radial Vibration: -9 Vdc (approximately 1.27 mm or 50 mils)\u003c\/li\u003e\n\u003cli\u003eIncremental Scale Factor: 7.87 V\/mm (200 mV\/mil) ±5% for 1 metre system\u003c\/li\u003e\n\u003cli\u003eDeviation from Best Fit Straight Line: Less than ±0.025 mm (±1 mil) at 0 to 45C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTemperature and pressure ratings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Probe Operating Temperature: -52°C to +177°C (-62°F to +350°F)\u003c\/li\u003e\n\u003cli\u003eExtended Temperature Probe Tip: -52°C to +218°C (-62°F to +425°F)\u003c\/li\u003e\n\u003cli\u003eExtended Temperature Cable: -51°C to +260°C (-60°F to +500°F)\u003c\/li\u003e\n\u003cli\u003eProbe Pressure Seal: Viton O ring design\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: Less than 3% change at 93% humidity for up to 56 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey design features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePatented TipLoc molding for robust bond between tip and body\u003c\/li\u003e\n\u003cli\u003ePatented CableLoc design with 330 N (75 lbf) pull strength\u003c\/li\u003e\n\u003cli\u003eOptional FluidLoc cable option prevents oil leakage\u003c\/li\u003e\n\u003cli\u003eThicker PPS plastic encapsulation for ruggedness\u003c\/li\u003e\n\u003cli\u003eLarger diameter probe body for stronger case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne Bently Nevada 330101-00-11-10-02-00 proximity probe\u003c\/li\u003e\n\u003cli\u003e1.0 metre cable with ClickLoc connector\u003c\/li\u003e\n\u003cli\u003eWeight: 0.323 kg (0.71 lbs)\u003c\/li\u003e\n\u003cli\u003eShipping: FedEx, UPS, DHL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003eQ: What is the incremental scale factor of Bently Nevada 330101-00-11-10-02-00?\u003c\/p\u003e\n\u003cp\u003eA: 7.87 V\/mm or 200 mV\/mil ±5% for 1 metre system.\u003c\/p\u003e\n\u003cp\u003eQ: What is the operating temperature range of this probe?\u003c\/p\u003e\n\u003cp\u003eA: -52°C to +177°C for standard probe, up to +218°C for extended tip.\u003c\/p\u003e\n\u003cp\u003eQ: What is the weight of 330101-00-11-10-02-00?\u003c\/p\u003e\n\u003cp\u003eA: 0.323 kg (0.71 lbs).\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047707279492,"sku":"330101-00-11-10-02-00","price":117.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-11-10-02-00.jpg?v=1779719116"},{"product_id":"bently-nevada-3300-xl-probe-330102-20-73-05-02-cn","title":"Bently Nevada 3300 XL Probe 330102-20-73-05-02-CN","description":"\u003cp\u003eBently Nevada presents the \u003cstrong\u003e330102-20-73-05-02-CN\u003c\/strong\u003e 3300 XL 8 mm proximity probe with armored construction. This transducer features a 3\/8-24 UNF thread and delivers reliable shaft vibration monitoring for industrial machinery.\u003c\/p\u003e\n\u003ch2 style=\"color: #388e3c; font-weight: bold;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Number:\u003c\/strong\u003e \u003cstrong\u003e330102-20-73-05-02-CN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3300 XL 8 mm Probe, 3\/8-24 UNF thread, with armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.131 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #388e3c; font-weight: bold;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330102\u003c\/strong\u003e - 3300 XL 8 mm Probe, 3\/8-24 UNF thread, with armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 20 = 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 73 = 7.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Cable Length:\u003c\/strong\u003e 05 = 0.5 metre (1.6 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e 02 = Miniature coaxial ClickLoc™ connector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approvals:\u003c\/strong\u003e CN = Country-specific approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #388e3c; font-weight: bold;\"\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmored Construction:\u003c\/strong\u003e Enhanced durability for harsh environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8-24 UNF for secure mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e 0.5m cable length for space-constrained installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClickLoc Connector:\u003c\/strong\u003e Reliable coaxial connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Approvals:\u003c\/strong\u003e Meets CN certification requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #388e3c; font-weight: bold;\"\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330102-20-73-05-02-CN\u003c\/strong\u003e proximity probe\u003c\/li\u003e\n\u003cli\u003eInstallation documentation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping:\u003c\/strong\u003e FedEx, UPS, DHL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e 1-year warranty, technical assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #388e3c; font-weight: bold;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does the model code \u003cstrong\u003e330102-20-73-05-02-CN\u003c\/strong\u003e mean?\u003c\/strong\u003e\u003cbr\u003eA: 8mm probe with 20\" unthreaded length, 7.3\" case, 0.5m cable, ClickLoc connector, and country-specific approvals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the weight of this probe?\u003c\/strong\u003e\u003cbr\u003eA: The probe weighs 0.131 kg, making it ideal for applications where minimal mass is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the CN approvals?\u003c\/strong\u003e\u003cbr\u003eA: CN indicates country-specific certifications that meet local regulatory requirements for industrial monitoring equipment.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047707345028,"sku":"330102-20-73-05-02-CN","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330102-20-73-05-02-CN.jpg?v=1772196454"},{"product_id":"armored-8mm-probe-bently-nevada-330102-00-28-05-02-00","title":"Armored 8mm Probe Bently Nevada 330102-00-28-05-02-00","description":"\u003ch2 style=\"color: #2a5d8a; font-weight: bold;\"\u003eBently Nevada 330102-00-28-05-02-00 Armored 8mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eBently Nevada presents the \u003cstrong\u003e330102-00-28-05-02-00\u003c\/strong\u003e armored 8mm proximity probe for precision vibration monitoring in space-constrained applications. \u003c\/p\u003e\n\u003ch2 style=\"color: #2a5d8a; font-weight: bold;\"\u003eProduct Highlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #d32f2f; font-weight: bold;\"\u003eIndustrial armored design\u003c\/span\u003e for maximum durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #d32f2f; font-weight: bold;\"\u003eShort 0.5m cable\u003c\/span\u003e version for compact spaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #d32f2f; font-weight: bold;\"\u003eStandard ClickLoc connector\u003c\/span\u003e for secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #2a5d8a; font-weight: bold;\"\u003eModel Configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330102:\u003c\/strong\u003e Base model 8mm probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00:\u003c\/strong\u003e 0\" unthreaded length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28:\u003c\/strong\u003e 2.8\" case length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05:\u003c\/strong\u003e 0.5m (1.6ft) cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e02:\u003c\/strong\u003e ClickLoc connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00:\u003c\/strong\u003e No special certifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #2a5d8a; font-weight: bold;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8-24 UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Range:\u003c\/strong\u003e 0.25-2.3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 200mV\/mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -30°C to 100°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 0.5m standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 160g (0.35 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #2a5d8a; font-weight: bold;\"\u003eInstallation Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMount within 45° of vertical position\u003c\/li\u003e\n\u003cli\u003eMaintain 1-3mm air gap between probe and target\u003c\/li\u003e\n\u003cli\u003eSecure with 8-10 Nm torque\u003c\/li\u003e\n\u003cli\u003eRoute cable away from heat sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #2a5d8a; font-weight: bold;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does the model code \u003cstrong\u003e330102-00-28-05-02-00\u003c\/strong\u003e mean?\u003c\/strong\u003e\u003cbr\u003eA: 8mm probe with 0\" unthreaded length, 2.8\" case, 0.5m cable, ClickLoc connector, and no special certifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the optimal mounting angle?\u003c\/strong\u003e\u003cbr\u003eA: Mount within 45 degrees of vertical for best performance and reliable measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What torque should I use for installation?\u003c\/strong\u003e\u003cbr\u003eA: Secure with 8-10 Nm torque. Do not overtighten as this may damage the probe.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047708164228,"sku":"330102-00-28-05-02-00","price":167.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330102-00-28-05-02-00.jpg?v=1772194464"},{"product_id":"330102-10-45-10-02-05-bently-nevada-1m-probe","title":"330102-10-45-10-02-05 Bently Nevada 1m Probe","description":"\u003ch2 style=\"color: #004d99; font-weight: bold;\"\u003eBently Nevada 330102-10-45-10-02-05 3300 XL 8mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eBently Nevada presents the \u003cstrong\u003e330102-10-45-10-02-05\u003c\/strong\u003e 3300 XL 8 mm Proximity Probe for precision vibration monitoring. \u003c\/p\u003e\n\u003ch2 style=\"color: #004d99; font-weight: bold;\"\u003eKey Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cspan style=\"color: #2f855a; font-weight: bold;\"\u003e330102-10-45-10-02-05\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3\/8-24 UNF with 0.563\" max engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 1 inch (25.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Length:\u003c\/strong\u003e 4.5 inches (114.3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 1.0 meter (3.3 ft) with \u003cspan style=\"color: #2f855a; font-weight: bold;\"\u003e7.59Ω ±0.50Ω resistance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 323 g per meter (11.4 oz per foot)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #004d99; font-weight: bold;\"\u003eEnhanced Durability\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip:\u003c\/strong\u003e Polyphenylene sulfide (PPS) – resists corrosion up to \u003cspan style=\"color: #c53030; font-weight: bold;\"\u003e218°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e AISI 303\/304 stainless steel – withstands pressures up to \u003cspan style=\"color: #c53030; font-weight: bold;\"\u003e10 bar differential\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e Viton® O-ring for IP67-equivalent protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #004d99; font-weight: bold;\"\u003eAdvanced Electrical Properties\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 0.25–2.3 mm (10–90 mils) with \u003cspan style=\"color: #2f855a; font-weight: bold;\"\u003e-1 to -17 Vdc output\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Gap Setting:\u003c\/strong\u003e -9 Vdc at 1.27 mm (50 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e ±3% accuracy up to \u003cspan style=\"color: #2f855a; font-weight: bold;\"\u003e12 kHz\u003c\/span\u003e with 305m cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #004d99; font-weight: bold;\"\u003eEnvironmental Resilience\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e \u003cspan style=\"color: #c53030; font-weight: bold;\"\u003e-62°F to +500°F (-52°C to +260°C)\u003c\/span\u003e for cable and connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity Resistance:\u003c\/strong\u003e Less than 3% ASF change after 56 days at 93% RH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #004d99; font-weight: bold;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does the model code \u003cstrong\u003e330102-10-45-10-02-05\u003c\/strong\u003e signify?\u003c\/strong\u003e\u003cbr\u003eA: 3300 XL 8mm probe with 1.0\" unthreaded length, 4.5\" case, 1.0m cable, ClickLoc connector, and standard agency approvals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the optimal gap setting for this probe?\u003c\/strong\u003e\u003cbr\u003eA: Set for -9 Vdc output at 1.27 mm (50 mils) gap for best linear range performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What temperature can the probe tip withstand?\u003c\/strong\u003e\u003cbr\u003eA: The PPS probe tip resists corrosion up to 218°C, while cable and connector handle -52°C to +260°C.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047708229764,"sku":"330102-10-45-10-02-05","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330102-10-45-10-02-05.jpg?v=1772194242"},{"product_id":"bently-nevada-330101-00-15-20-02-05-clickloc-probe","title":"Bently Nevada 330101-00-15-20-02-05 ClickLoc Probe","description":"\u003ch2 style=\"color: #2c3e50;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330101-00-15-20-02-05\u003c\/strong\u003e is a high-performance 3300 XL 8 mm proximity probe designed for precision vibration and position monitoring in industrial machinery. As a critical component of the 3300 XL Proximitor® System, this probe provides a highly accurate linear output for measuring shaft displacement and radial vibration.\u003c\/p\u003e\n\u003cp\u003eThis U.S.A.-manufactured sensor is built to withstand rigorous industrial environments, featuring a \u003cstrong\u003etotal weight of 0.646 kg\u003c\/strong\u003e. It is equipped with a miniature coaxial ClickLoc™ connector and a standard cable, ensuring a stable electrical path to the proximitor sensor across its 2.0-meter total length.\u003c\/p\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003eTechnical Configuration\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; border: 1px solid #ccc; margin-bottom: 20px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f8f9fa;\"\u003e\n\u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eOption Code\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eDescription Details\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eA: Unthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e0.0 in (Option 00)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eB: Overall Case Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e1.5 in (Option 15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eC: Total Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e2.0 Meters \/ 6.6 Feet (Option 20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eD: Connector\/Cable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eMiniature Coaxial ClickLoc (Option 02)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eE: Agency Approvals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eMultiple Approvals - CSA, ATEX, IECEx (Option 05)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003ePerformance \u0026amp; Environmental Metrics\u003c\/h2\u003e\n\u003cul style=\"line-height: 1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Boasts an impact resistance of 500 g and vibration resistance of 10 g, making it suitable for high-stress rotating equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Efficiency:\u003c\/strong\u003e Features a low rated power consumption of only 25 mW with a maximum voltage rating of 40 V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Operating Range:\u003c\/strong\u003e Operates efficiently in humidity levels from 0% to 95% and offers a storage temperature range from -40°C to +85°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid Deployment:\u003c\/strong\u003e Requires a calibration time of just 10 minutes to ensure peak measurement accuracy within the 1 Hz to 2 kHz frequency response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003eInstallation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003eThe IC330101 series probes are designed for standard industrial mounting. The ClickLoc™ connector system provides a secure, low-loss connection that resists accidental disconnection during operation. To maintain the integrity of the sine wave output and 100 kΩ input resistance, ensure that the cable is routed away from high-voltage EMI sources and installed using Bently Nevada recommended mounting hardware.\u003c\/p\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is the benefit of the 00 unthreaded length option?\u003c\/strong\u003e\u003cbr\u003eA1: The 00 option means the probe body is fully threaded up to the tip, allowing for maximum flexibility when adjusting the probe gap in narrow mounting brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Can this probe be used in hazardous areas?\u003c\/strong\u003e\u003cbr\u003eA2: Yes, the \"05\" agency approval option indicates multiple certifications (such as ATEX and IECEx) for use in potentially explosive atmospheres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Is the 2.0-meter length compatible with standard extension cables?\u003c\/strong\u003e\u003cbr\u003eA3: Absolutely. The 2.0m probe length is a standard configuration that works seamlessly with Bently Nevada extension cables to reach a total system length of 5m or 9m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New \u0026amp; Original in Factory Packing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 Months Factory Warranty\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047709245572,"sku":"330101-00-15-20-02-05","price":196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-15-20-02-05.jpg?v=1776435472"},{"product_id":"330101-00-28-20-02-05-bently-nevada-probe","title":"330101-00-28-20-02-05 Bently Nevada - Probe","description":"\u003ch2 style=\"color: #2c3e50;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330101-00-28-20-02-05\u003c\/strong\u003e is an extended-case version of the 3300 XL 8 mm proximity probe series. Featuring a \u003cstrong\u003e2.8-inch overall case length\u003c\/strong\u003e and a standard 3\/8-24 UNF thread, this probe is specifically designed for applications requiring a longer reach through mounting brackets or machine housings.\u003c\/p\u003e\n\u003cp\u003eThis U.S.A.-made sensor utilizes patented CableLoc™ technology, providing a 330 N (75 lbf) pull strength to ensure the cable remains securely attached under industrial strain. With a \u003cstrong\u003ecable weight of 323 g\/m (11.4 oz)\u003c\/strong\u003e and a rugged PPS plastic tip, it offers superior physical protection and high-precision vibration monitoring for critical rotating machinery.\u003c\/p\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003eTechnical Configuration\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; border: 1px solid #ccc; margin-bottom: 20px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f8f9fa;\"\u003e\n\u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eOption Specification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eTechnical Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eUnthreaded Length (A)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e0.0 in (Option 00)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eOverall Case Length (B)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e2.8 in (Option 28)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eTotal Length (C)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e2.0 Meters \/ 6.6 Feet (Option 20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eConnector Style (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eMiniature ClickLoc (Option 02)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eApprovals (E)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eCSA, ATEX, IECEx (Multiple Approvals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003eKey Performance Features\u003c\/h2\u003e\n\u003cul style=\"line-height: 1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e The 2.8-inch case length allows for easier installation in deep-port applications without the need for additional sleeve adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Robustness:\u003c\/strong\u003e The 8 mm probe body provides a thicker encapsulation of the internal coil, increasing resistance to physical abuse and moisture ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e Tip material made of Polyphenylene sulfide (PPS) ensures stable performance even when exposed to harsh process lubricants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerified Precision:\u003c\/strong\u003e Features an Incremental Scale Factor (ISF) of 7.87 V\/mm (200 mV\/mil) with less than ±0.025 mm (±1 mil) deviation at standard operating temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003eInstallation \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003eThe 330101-00-28-20-02-05 should be gapped at approximately -9 Vdc (1.27 mm) for radial vibration tasks. Its Viton® O-ring is designed to provide a high-pressure seal between the tip and case, though it is recommended to avoid temperatures below -34°C to maintain seal integrity. The ClickLoc connector ensures a vibration-proof link to the extension cable.\u003c\/p\u003e\n\u003ch2 style=\"color: #2c3e50;\"\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: Why choose the 2.8-inch case over shorter models?\u003c\/strong\u003e\u003cbr\u003eA1: The longer case is essential for machines with thicker walls or when the probe must pass through internal oil deflectors to reach the shaft surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Is the Certificate of Origin (COO) available?\u003c\/strong\u003e\u003cbr\u003eA2: Yes, since this probe is manufactured in the U.S.A., a COO can be provided for international shipping and compliance needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Can this probe handle high humidity?\u003c\/strong\u003e\u003cbr\u003eA3: Absolutely. It is tested in 93% humidity according to IEC 68-2-3 standards, showing less than a 3% change in scale factor over 56 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New \u0026amp; Original in Factory Packing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 Months Factory Warranty\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047709343876,"sku":"330101-00-28-20-02-05","price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-28-20-02-05.jpg?v=1776435256"},{"product_id":"330103-00-05-50-02-cn-bently-nevada-3300-xl-8mm-probe","title":"330103-00-05-50-02-CN Bently Nevada 3300 XL 8mm Probe","description":"\u003ch2 style=\"font-size: 1.5em; color: #2c3e50; padding-bottom: 10px;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330103-00-05-50-02-CN\u003c\/strong\u003e is a high-precision 8mm reverse-mount proximity probe from the 3300 XL series. This eddy current sensor provides non-contact displacement measurement for critical rotating machinery. With its CN-specific approval and rugged 304 stainless steel housing, it delivers sub-micron resolution for vibration and axial position monitoring in the most demanding industrial environments.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size: 1.3em; color: #2c3e50; margin-top: 25px;\"\u003eTechnical Configuration\u003c\/h3\u003e\n\u003cul style=\"line-height: 1.6; list-style-type: disc; margin-left: 20px;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003e-00 (Unthreaded Length):\u003c\/strong\u003e 0 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e-05 (Case Length):\u003c\/strong\u003e 50 mm total threaded case.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e-50 (Total Length):\u003c\/strong\u003e 5.0 Meters (16.4 ft).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e-02 (Connector):\u003c\/strong\u003e ClickLoc Miniature Coaxial.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e-CN (Approval):\u003c\/strong\u003e Country-specific Approval (China\/Global Compliance).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"font-size: 1.3em; color: #2c3e50; margin-top: 25px;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-top: 10px; border: 1px solid #ddd;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f8f9fa;\"\u003e\n      \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eLinear Range\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e2.0 mm (80 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eScale Factor\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrequency Response\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e0 to 10 kHz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eOperating Temp\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e-51°C to +177°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Material\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eTeflon® coated coaxial\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eIngress Protection\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eIP67 rated\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"font-size: 1.3em; color: #2c3e50; margin-top: 25px;\"\u003eInstallation Guide\u003c\/h3\u003e\n\u003cul style=\"line-height: 1.6; list-style-type: disc; margin-left: 20px;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGap Setting:\u003c\/strong\u003e Calibrate the mechanical gap to reach \u003cstrong\u003e-9.0 VDC\u003c\/strong\u003e for center-range linearity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Use M10 x 1 threads with a maximum torque of \u003cstrong\u003e25 N·m\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem Matching:\u003c\/strong\u003e This 5m probe must be paired with a 5m Proximitor® sensor and extension cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"font-size: 1.3em; color: #2c3e50; margin-top: 25px;\"\u003eEngineering Advantages\u003c\/h3\u003e\n\u003cp style=\"line-height: 1.6;\"\u003eThe 330103 series utilizes advanced PPS (Polyphenylene Sulfide) polymer tips for superior resistance to caustic lubricants. Its ClickLoc connector system provides a secure, vibration-resistant electrical path, making it the industry standard for \u003cstrong\u003eTurbine Supervisory Instrumentation (TSI)\u003c\/strong\u003e and 3500 series monitoring racks.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size: 1.3em; color: #2c3e50; margin-top: 25px;\"\u003eTechnical FAQs\u003c\/h3\u003e\n\u003cdiv style=\"line-height: 1.6; margin-bottom: 10px;\"\u003e\n  \u003cp\u003e\u003cstrong\u003eQ1: What does the \"CN\" suffix signify?\u003c\/strong\u003e\u003cbr\u003e\n  A1: The \"CN\" indicates Country-specific Approvals (typically China Ex or localized certification) while maintaining the global 3300 XL performance standards.\u003c\/p\u003e\n  \n  \u003cp\u003e\u003cstrong\u003eQ2: Is this probe compatible with older 3300 systems?\u003c\/strong\u003e\u003cbr\u003e\n  A2: Yes, the 3300 XL system is designed to be backwards compatible with non-XL 3300 series components, though full XL performance requires an XL Proximitor.\u003c\/p\u003e\n  \n  \u003cp\u003e\u003cstrong\u003eQ3: How do I verify probe integrity?\u003c\/strong\u003e\u003cbr\u003e\n  A3: Use a multimeter to check the resistance between the center pin and the coaxial shield. A reading of 7.5 to 11.0 Ω is expected for a healthy 5m probe.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047709933700,"sku":"330103-00-05-50-02-CN","price":211.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-11-20-02-05_a50be3a9-90c0-414b-94fb-8a6c3c742e09.jpg?v=1777119369"},{"product_id":"bently-nevada-330104-04-10-05-01-cn-3300-xl-8mm-probe","title":"Bently Nevada 330104-04-10-05-01-CN | 3300 XL 8mm Probe","description":"\u003ch2\u003eBently Nevada 330104-04-10-05-01-CN 3300 XL 8 mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330104-04-10-05-01-CN\u003c\/strong\u003e is a 3300 XL 8 mm proximity probe with M10x1 thread and armor. Features 40mm unthreaded length and 100mm case length. \u003c\/p\u003e\n\u003ch2\u003eModel configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct number:\u003c\/strong\u003e 330104-04-10-05-01-CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe type:\u003c\/strong\u003e 3300 XL 8 mm Proximity Probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal length:\u003c\/strong\u003e 0.5 meters (1.6 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall case length:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc with connector protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.323 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the total length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e0.5 meters (1.6 feet) with 40mm unthreaded and 100mm case length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector type is included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMiniature coaxial ClickLoc connector with connector protector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the CN suffix indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCountry-specific approvals for local regulatory compliance.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047710392452,"sku":"330104-04-10-05-01-CN","price":252.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330104-04-10-05-01-CN.jpg?v=1774882716"},{"product_id":"bently-nevada-330104-05-12-05-02-05-8mm-probe-armor","title":"Bently Nevada 330104-05-12-05-02-05 8mm Probe Armor","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong style=\"color: #003366;\"\u003eBENTLY NEVADA 330104-05-12-05-02-05\u003c\/strong\u003e is a high-precision 3300 XL 8 mm proximity probe designed for critical vibration and position monitoring in industrial machinery. This model features an M10 x 1 threaded case with integrated armor for enhanced mechanical protection. Engineered for reliability, it provides non-contacting measurement of shaft motion and position when used with a 3300 XL Proximitor Sensor. This probe is manufactured in the U.S.A. and can be provided with a Certificate of Origin (COO) upon request.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Configuration\u003c\/h2\u003e\n\u003ch3\u003eRobust Mechanical Construction\u003c\/h3\u003e\n\u003cp\u003eThe probe tip is crafted from high-grade Polyphenylene sulfide (PPS), while the case is constructed from AISI 303 or 304 stainless steel. With a net weight of approximately 0.28 kg (0.62 lbs), this lightweight yet durable module is designed for long-term stability in harsh environments. To maintain pressure integrity, the 330104-05-12-05-02-05 utilizes a Viton O-ring seal to manage differential pressure between the tip and the case.\u003c\/p\u003e\n\u003ch3\u003eSecure Connectivity\u003c\/h3\u003e\n\u003cp\u003eThis configuration utilizes the Miniature coaxial ClickLoc connector (Option 02), designed for secure, vibration-resistant connections to standard extension cables. The integrated armor provides an additional layer of protection for the cable, ensuring signal stability in high-stress industrial applications.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 25px 0; border: 1px solid #e0e0e0; font-family: inherit;\"\u003e\n    \u003cthead\u003e\n        \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n            \u003cth style=\"border: 1px solid #e0e0e0; padding: 15px; text-align: left; font-size: 15px; color: #333;\"\u003eSpecification Parameter\u003c\/th\u003e\n            \u003cth style=\"border: 1px solid #e0e0e0; padding: 15px; text-align: left; font-size: 15px; color: #333;\"\u003eValue\/Detail\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px; background-color: #fafafa; width: 40%;\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px;\"\u003eM10 x 1 (with Armor)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px; background-color: #fafafa;\"\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px;\"\u003e50 mm (Option 05)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px; background-color: #fafafa;\"\u003e\u003cstrong\u003eOverall Case Length\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px;\"\u003e120 mm (Option 12)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px; background-color: #fafafa;\"\u003e\u003cstrong\u003eTotal Length\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px;\"\u003e0.5 Meter (1.6 Feet)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px; background-color: #fafafa;\"\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px;\"\u003eApprox. 0.28 kg (0.62 lbs)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px; background-color: #fafafa;\"\u003e\u003cstrong\u003eAgency Approvals\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px;\"\u003eCSA, ATEX, IECEx (Option 05)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px; background-color: #fafafa;\"\u003e\u003cstrong\u003eOutput Resistance\u003c\/strong\u003e\u003c\/td\u003e\n            \u003ctd style=\"border: 1px solid #e0e0e0; padding: 12px; font-size: 14px;\"\u003e50 Ohms (Nominal)\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePerformance Characteristics\u003c\/h2\u003e\n\u003cp\u003eFor optimal accuracy, the 330104-05-12-05-02-05 system should be calibrated using an AISI 4140 steel target. Standard performance specifications are based on a probe gap of 1.27 mm (50 mils) and a power supply range of -23 Vdc to -26 Vdc (when using barriers). Operation at voltages more positive than -23.5 Vdc may result in a reduced linear range. The system sensitivity remains stable with less than 2 mV change in output voltage per volt change in input voltage.\u003c\/p\u003e\n\n\u003ch2\u003eEngineering Advantages\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClickLoc Connector:\u003c\/strong\u003e Miniature coaxial ClickLoc connector ensures a reliable, snap-lock interface that resists disconnection during machine operation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnhanced Protection:\u003c\/strong\u003e Integrated stainless steel armor shields the cable from physical damage and environmental hazards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBroad Compliance:\u003c\/strong\u003e Fully certified for hazardous areas with CSA, ATEX, and IECEx approvals, suitable for global industrial deployments.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecision Sealing:\u003c\/strong\u003e Viton O-ring technology provides a superior pressure seal between the probe tip and case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is the benefit of the M10 x 1 thread with armor?\u003c\/strong\u003e\u003cbr\u003e\nA1: The M10 x 1 thread allows for standard metric installation, while the armor provides essential mechanical protection for the cable in high-wear or abrasive environments.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ2: Can I use this probe with a target other than AISI 4140 steel?\u003c\/strong\u003e\u003cbr\u003e\nA2: While the probe will function, the system accuracy specifications specifically apply to AISI 4140 steel targets. Other targets require custom calibration.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ3: Is this probe suitable for high-altitude applications?\u003c\/strong\u003e\u003cbr\u003e\nA3: Yes, standard performance specifications are rated for altitudes up to 2000 meters.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047710457988,"sku":"330104-05-12-05-02-05","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330104-05-12-05-02-05-1.jpg?v=1776695222"},{"product_id":"330105-02-12-15-12-05-bently-nevada-3300-xl-8mm-probe","title":"330105-02-12-15-12-05 Bently Nevada 3300 XL 8mm Probe","description":"\u003ch3\u003eBently Nevada 3300 XL 8mm Reverse Mount Probe\u003c\/h3\u003e\n\u003cp\u003eThe \u003cb\u003eBently Nevada 3300 XL\u003c\/b\u003e 8mm probe delivers precision monitoring for industrial applications. Model \u003cb\u003e330105-02-12-15-12-05\u003c\/b\u003e ensures reliable performance in demanding environments.\u003c\/p\u003e\n\u003ch4\u003eProduct Identification \u0026amp; Details\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e \u003cspan style=\"color: #2c3e50;\"\u003e\u003cb\u003e3300 XL\u003c\/b\u003e Monitoring System\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Model:\u003c\/b\u003e \u003cspan style=\"color: #2980b9;\"\u003e\u003cb\u003e330105-02-12-15-12-05\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight:\u003c\/b\u003e 0.323 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety Approvals:\u003c\/b\u003e CSA, ATEX, IECEX certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTotal Length:\u003c\/b\u003e 1.5 meters (4.9 feet) extended reach\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensing Range:\u003c\/b\u003e \u003cspan style=\"color: #27ae60;\"\u003e80 mils (2 mm)\u003c\/span\u003e nominal linear range\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProbe Tip Diameter:\u003c\/b\u003e 8 mm compact design\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMeasurement Accuracy:\u003c\/b\u003e High sensitivity output\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEnvironmental Rating:\u003c\/b\u003e Hazardous location certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the sensing range?\u003c\/b\u003e 80 mils (2 mm) nominal linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat safety approvals does it have?\u003c\/b\u003e CSA, ATEX, and IECEX certifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the cable length?\u003c\/b\u003e 1.5 meters for extended reach applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSupport \u0026amp; Service\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 12-month limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTechnical Support:\u003c\/b\u003e Professional assistance available\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContact:\u003c\/b\u003e \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping:\u003c\/b\u003e Worldwide delivery options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDownload complete technical specifications for detailed information:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf?v=1739784146\"\u003eAccess Detailed Product Specifications PDF\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047712292996,"sku":"330105-02-12-15-12-05","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330105-02-12-15-12-05-1.jpg?v=1758551176"},{"product_id":"3300-xl-probe-330106-05-30-05-02-05-bently-nevada","title":"3300 XL Probe 330106-05-30-05-02-05 Bently Nevada","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 3300 XL 8mm Reverse Mount Probe 330106-05-30-05-02-05\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330106-05-30-05-02-05\u003c\/strong\u003e reverse mount probe delivers certified performance for hazardous environments. Built for extreme conditions.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct Identification\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: \u003cstrong\u003e330106-05-30-05-02-05\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: 8mm Reverse Mount Probe\u003c\/li\u003e\n\u003cli\u003eSeries: 3300 XL\u003c\/li\u003e\n\u003cli\u003eBrand: Bently Nevada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable Length: 0.5 meters\u003c\/li\u003e\n\u003cli\u003eConnector: Miniature ClickLoc Coaxial\u003c\/li\u003e\n\u003cli\u003eCertifications: CSA, ATEX, IECEx\u003c\/li\u003e\n\u003cli\u003eWeight: 0.323 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePerformance Ratings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature Range: -34°C to +177°C\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 0 to 10 kHz\u003c\/li\u003e\n\u003cli\u003eHazardous area certified\u003c\/li\u003e\n\u003cli\u003eExtreme temperature capable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompact 0.5m cable\u003c\/li\u003e\n\u003cli\u003eReverse mount design\u003c\/li\u003e\n\u003cli\u003eEasy connector system\u003c\/li\u003e\n\u003cli\u003eRugged construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEmail: \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e24\/7 expert support\u003c\/li\u003e\n\u003cli\u003eHazardous area guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct Resources\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf?v=1739784146\" target=\"_blank\"\u003eDownload Technical Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat certifications does it have?\u003c\/strong\u003e CSA, ATEX, and IECEx for hazardous areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the temperature rating?\u003c\/strong\u003e Operates from -34°C to +177°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this for explosive atmospheres?\u003c\/strong\u003e Yes, fully certified for hazardous locations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047712653444,"sku":"330106-05-30-05-02-05","price":226.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330106-05-30-05-02-05.jpg?v=1758809450"},{"product_id":"bently-nevada-330130-080-10-00-8-0m-fluidloc-extension-cable","title":"Bently Nevada 330130-080-10-00 8.0m FluidLoc Extension Cable","description":"\u003ch2\u003eBently Nevada 330130-080-10-00 FluidLoc Extension Cable\u003c\/h2\u003e\n\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330130-080-10-00\u003c\/strong\u003e is an 8.0 meter FluidLoc extension cable designed for wet and hazardous environments. Manufactured in the USA with optional Certificate of Origin.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #e74c3c;\"\u003eFluidLoc technology\u003c\/span\u003e for fluid-resistant performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #e74c3c;\"\u003e8.0 meter length (26.2 feet)\u003c\/span\u003e for flexible installation\u003c\/li\u003e\n\u003cli\u003eMade in USA quality construction\u003c\/li\u003e\n\u003cli\u003eOptional Certificate of Origin available\u003c\/li\u003e\n\u003cli\u003e12-month manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Number:\u003c\/strong\u003e \u003cspan style=\"color: #e74c3c;\"\u003e330130-080-10-00\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3300 XL Standard Extension Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8.0 metres (26.2 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e FluidLoc cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e \u003cspan style=\"color: #e74c3c;\"\u003e-50°C to 150°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e 500V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid Resistance:\u003c\/strong\u003e \u003cspan style=\"color: #e74c3c;\"\u003eIP68 rated\u003c\/span\u003e when connected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eProduct Documentation\u003c\/h3\u003e\n\u003cp\u003e\u003ca style=\"color: #2a5db0; font-weight: bold;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf?v=1739784146\" target=\"_blank\"\u003eDownload Detailed Product Specifications (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047712817284,"sku":"330130-080-10-00","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330130-080-10-00.jpg?v=1774089974"},{"product_id":"armored-fluidloc-cable-330130-080-11-00-bently-nevada","title":"Armored FluidLoc Cable 330130-080-11-00 Bently Nevada","description":"\u003ch2\u003eBently Nevada 330130-080-11-00 3300 XL Armored FluidLoc Extension Cable\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 330130 - 3300 XL Standard Extension Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Length:\u003c\/strong\u003e \u003cspan style=\"color: #e74c3c;\"\u003e8.0 meters (26.2 feet)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eOrdering Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.272 kg (0.6 lbs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight per Meter:\u003c\/strong\u003e 34 g\/m (0.4 oz\/ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Protection:\u003c\/strong\u003e Armored FluidLoc cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval Option:\u003c\/strong\u003e Not required (00)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Documentation\u003c\/h3\u003e\n\u003cp\u003e\u003ca style=\"color: #2a5db0; font-weight: bold;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf?v=1739784146\" target=\"_blank\"\u003eDownload Detailed Product Specifications (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047713144964,"sku":"330130-080-11-00","price":216.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330130-080-11-00-2.jpg?v=1774091385"},{"product_id":"3300-xl-etr-cable-bently-nevada-330730-040-10-00","title":"3300 XL ETR Cable | Bently Nevada 330730-040-10-00","description":"\u003ch3\u003e3300 XL ETR Extension Cable - 330730-040-10-00\u003c\/h3\u003e\n\u003cp\u003eThis specialized FluidLoc extension cable from \u003cstrong\u003eBently Nevada\u003c\/strong\u003e provides exceptional protection against fluid contamination in industrial monitoring systems. The \u003cstrong\u003e330730-040-10-00\u003c\/strong\u003e model is engineered for reliability in challenging environments.\u003c\/p\u003e\n\u003ch4\u003eProduct Configuration\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e 330730-AAA-BB-CC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length (A):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e040\u003c\/span\u003e - 4.0 meters (13.1 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type (B):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e10\u003c\/span\u003e - FluidLoc leak-proof design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval (C):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e00\u003c\/span\u003e - Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40°C to 80°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Rating:\u003c\/strong\u003e Up to 300V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Weight:\u003c\/strong\u003e 45 g\/m (0.5 oz\/ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Weight:\u003c\/strong\u003e 0.18 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e Durable PVC construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e FluidLoc prevents internal fluid migration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKey Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFluidLoc technology prevents oil and liquid leaks\u003c\/li\u003e\n\u003cli\u003eDurable PVC jacket for long service life\u003c\/li\u003e\n\u003cli\u003eWide operating temperature range\u003c\/li\u003e\n\u003cli\u003eReliable signal transmission in harsh conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOil and gas industry applications\u003c\/li\u003e\n\u003cli\u003eHydraulic system monitoring\u003c\/li\u003e\n\u003cli\u003eIndustrial machinery with lubrication systems\u003c\/li\u003e\n\u003cli\u003eProcess control in fluid-rich environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eQuality Assurance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to Bently Nevada quality standards\u003c\/li\u003e\n\u003cli\u003eRigorous performance testing\u003c\/li\u003e\n\u003cli\u003eNo agency approvals required\u003c\/li\u003e\n\u003cli\u003e1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat makes FluidLoc special?\u003c\/strong\u003e It prevents fluids from traveling through the cable interior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the temperature range?\u003c\/strong\u003e Reliable operation from -40°C to 80°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty is included?\u003c\/strong\u003e All cables come with 1-year warranty coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSupport \u0026amp; Resources\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eComplete specifications: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_11_mm_Proximity_Transducer_System_Datasheet.pdf?v=1740617542\" target=\"_blank\"\u003eDownload Product Datasheet PDF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTechnical assistance: \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047713243268,"sku":"330730-040-10-00","price":217.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330730-040-10-00.jpg?v=1759741501"},{"product_id":"bently-nevada-330730-040-01-05-armored-extension-cable","title":"Bently Nevada 330730-040-01-05 | Armored Extension Cable","description":"\u003ch3\u003e3300 XL Extension Cable 330730-040-01-05 By Bently Nevada\u003c\/h3\u003e\n\u003cp\u003eThis rugged armored extension cable from \u003cstrong\u003eBently Nevada\u003c\/strong\u003e provides maximum protection and reliability for industrial monitoring systems. The \u003cstrong\u003e330730-040-01-05\u003c\/strong\u003e model is built to withstand demanding environments while maintaining precise signal transmission.\u003c\/p\u003e\n\u003ch4\u003eProduct Configuration\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e 330730-AAA-BB-CC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length (A):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e040\u003c\/span\u003e - 4.0 meters (13.1 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type (B):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e01\u003c\/span\u003e - Armored cable for physical protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval (C):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e05\u003c\/span\u003e - Multiple international approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -20°C to 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Rating:\u003c\/strong\u003e Up to 300V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Weight:\u003c\/strong\u003e 45 g\/m (0.5 oz\/ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Weight:\u003c\/strong\u003e 0.18 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e High-quality PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Rating:\u003c\/strong\u003e IP65 water and dust resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Armored design for maximum durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIndustrial Applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy machinery monitoring\u003c\/li\u003e\n\u003cli\u003eOutdoor industrial installations\u003c\/li\u003e\n\u003cli\u003eWet or dusty environments\u003c\/li\u003e\n\u003cli\u003eCritical process monitoring systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCertifications \u0026amp; Quality\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMultiple international agency approvals\u003c\/li\u003e\n\u003cli\u003eIP65 protection rating certified\u003c\/li\u003e\n\u003cli\u003eManufactured to Bently Nevada standards\u003c\/li\u003e\n\u003cli\u003e1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does IP65 rating mean?\u003c\/strong\u003e Protected against dust and water jets from any direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the temperature range?\u003c\/strong\u003e Reliable operation from -20°C to 70°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty is included?\u003c\/strong\u003e Full 1-year manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSupport \u0026amp; Resources\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eComplete specifications: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_11_mm_Proximity_Transducer_System_Datasheet.pdf?v=1740617542\" target=\"_blank\"\u003eDownload Product Datasheet PDF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTechnical assistance: \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047713439876,"sku":"330730-040-01-05","price":221.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330730-040-01-05.jpg?v=1759742086"},{"product_id":"3300-xl-extension-cable-bently-nevada-330730-040-13-cn","title":"3300 XL Extension Cable | Bently Nevada 330730-040-13-CN","description":"\u003ch3\u003e3300 XL Extension Cable | Bently Nevada\u003c\/h3\u003e\n\u003cp\u003eModel: \u003cspan style=\"color: #ff6600;\"\u003e330730-040-13-CN\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis advanced armored FluidLoc extension cable from \u003cstrong\u003eBently Nevada\u003c\/strong\u003e delivers triple protection for the most demanding industrial environments. The \u003cstrong\u003e330730-040-13-CN\u003c\/strong\u003e model combines armor, fluid resistance, and connector protection for ultimate reliability.\u003c\/p\u003e\n\u003ch4\u003eProduct Configuration\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e 330730-AAA-BB-CC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length (A):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e040\u003c\/span\u003e - 4.0 meters (13.1 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type (B):\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e13\u003c\/span\u003e - Armored FluidLoc with connector protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval (C):\u003c\/strong\u003e CN - Country specific approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40°C to 85°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 30V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Resistance:\u003c\/strong\u003e 120 Ohms\/km\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Thickness:\u003c\/strong\u003e 0.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBending Radius:\u003c\/strong\u003e 60 mm minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility Rating:\u003c\/strong\u003e High for dynamic applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Resistance:\u003c\/strong\u003e Up to 65 dB EMI protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Weight:\u003c\/strong\u003e 45 g\/m (0.5 oz\/ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Weight:\u003c\/strong\u003e \u003cspan style=\"color: #ff6600;\"\u003e0.18 kg\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eArmored construction for physical protection\u003c\/li\u003e\n\u003cli\u003eFluidLoc technology prevents internal fluid migration\u003c\/li\u003e\n\u003cli\u003eBuilt-in connector protector for environmental sealing\u003c\/li\u003e\n\u003cli\u003eHigh EMI noise resistance (65 dB)\u003c\/li\u003e\n\u003cli\u003eExcellent flexibility for dynamic applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCertifications \u0026amp; Quality\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCountry specific agency approvals\u003c\/li\u003e\n\u003cli\u003eManufactured to Bently Nevada standards\u003c\/li\u003e\n\u003cli\u003eEMI resistance tested and verified\u003c\/li\u003e\n\u003cli\u003e1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat makes this cable special?\u003c\/strong\u003e Triple protection: armor, FluidLoc, and connector protector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the EMI resistance?\u003c\/strong\u003e Up to 65 dB electromagnetic interference protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty is included?\u003c\/strong\u003e Full 1-year manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSupport \u0026amp; Documentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDetailed specifications: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_11_mm_Proximity_Transducer_System_Datasheet.pdf?v=1740617542\" target=\"_blank\"\u003eDownload Product Datasheet PDF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTechnical support: \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047713505412,"sku":"330730-040-13-CN","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330730-040-13-CN.jpg?v=1759746074"},{"product_id":"330130-040-00-cn-bently-nevada-4m-proximity-sensor-cable","title":"330130-040-00-CN Bently Nevada 4m Proximity Sensor Cable","description":"\u003ch2 style=\"color: #1a365d; font-size: 14pt; margin-top: 0; margin-bottom: 12px;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp style=\"margin-bottom: 16px;\"\u003eThe Bently Nevada \u003cstrong style=\"color: #1a365d;\"\u003e330130-040-00-CN\u003c\/strong\u003e is a premium 3300 XL series extension cable engineered for critical machinery protection and industrial vibration monitoring systems. Spanning a precise length of 4.0 meters, this high-integrity cable is designed to bridge the gap between proximity probes and advanced ClickLoc proximity transducer sensors. Featuring upgraded structural materials, it provides superior shielding against harsh electromagnetic interference (EMI) and cross-talk, ensuring highly accurate signal transmission without distortion. This makes it an ideal fit for demanding rotation monitoring deployments in oil, gas, power generation, and heavy industrial processing facilities.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 16px; padding: 0; font-size: 0; line-height: 0;\"\u003e \u003c\/p\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 14pt; margin-bottom: 12px;\"\u003eCore Technical Advantages\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 6px;\"\u003eHigh-Coverage Shielded Insulation\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003eConstructed with a robust 85% coverage braided shield wrapped around a 24 AWG tinned copper conductor, this cable effectively eliminates signal degradation and ambient noise floor spikes, maintaining reliable voltage waveforms even across complex cable trays.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 6px;\"\u003eWide Operational Temperature Envelope\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003eInsulated with high-performance fluoropolymer materials, the cable is fully rated to operate reliably within a broad temperature range from -40°C to 105°C. This allows it to resist thermal stress near high-temperature turbine casings and rotating machinery blocks.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 16px;\"\u003eMilitary-Grade Mechanical Resilience\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 16px;\"\u003eBuilt to survive tight spatial routing and rough physical handling, the cable supports a tight minimum bend radius of 40 mm (8 times the outer cable diameter). Military-grade connector protectors safeguard the fragile terminal joints from mechanical shearing during installation.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 16px; padding: 0; font-size: 0; line-height: 0;\"\u003e \u003c\/p\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 14pt; margin-bottom: 12px;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; min-width: 500px; margin-bottom: 16px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f7fafc; border-bottom: 2px solid #cbd5e0;\"\u003e\n      \u003cth style=\"padding: 8px; text-align: left; font-weight: bold; color: #2d3748; font-size: 10pt; border: 1px solid #e2e8f0;\"\u003eParameter\u003c\/th\u003e\n      \u003cth style=\"padding: 8px; text-align: left; font-weight: bold; color: #2d3748; font-size: 10pt; border: 1px solid #e2e8f0;\"\u003eSpecification Details\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0; width: 35%;\"\u003eManufacturer\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eProduct Number\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003e330130-040-00-CN\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eCable Length\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003e4.0 meters \/ 13.1 feet (±1% manufacturing tolerance)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eConductor Architecture\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003e24 AWG tinned copper core (7 × 0.20 mm strands)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eVoltage \/ Safety Limits\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003e300V AC\/DC maximum rating\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eNet Weight \/ Density\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003eTotal: 0.136 kg (0.3 lbs) | Linear Density: 34 g\/m\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eProtection Rating\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003eIP67 liquid ingress and dust seal protection\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eSensor Compatibility\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003eFully compatible with 3300 XL 8mm and 11mm proximity systems\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n      \u003ctd style=\"padding: 8px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eAgency Approvals\u003c\/td\u003e\n      \u003ctd style=\"padding: 8px; border: 1px solid #e2e8f0;\"\u003eCE, RoHS compliant, Country-specific (CN) certificates\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp style=\"margin-bottom: 16px; padding: 0; font-size: 0; line-height: 0;\"\u003e \u003c\/p\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 14pt; margin-bottom: 12px;\"\u003eInstallation and Maintenance\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 6px;\"\u003eCoaxial Alignment and Connector Mating\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003eWhen attaching the 330130-040-00-CN to a proximity probe or transmitter, ensure the ClickLoc gold-plated pins are perfectly aligned before pressing them together. Avoid twisting the cable core during connection to prevent strain on the tinned copper wire strands.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 6px;\"\u003eIngress Protection and Environmental Sealing\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003eAlthough the fluoropolymer casing boasts an IP67 rating, all terminal connections located in high-moisture or oil-mist zones should be wrapped in silicone self-fusing tape or protected by oil-resistant flexible conduits to prevent fluid pooling around the contacts.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 16px;\"\u003eSystem Calibrations and Length Constraints\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 16px;\"\u003eProximity systems are precisely calibrated to specific total electrical lengths (typically 5-meter or 9-meter total system lengths). Always verify that adding this 4.0-meter extension matches your proximity sensor module's structural requirements for accurate gap measurement.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 16px; padding: 0; font-size: 0; line-height: 0;\"\u003e \u003c\/p\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 14pt; margin-bottom: 12px;\"\u003eEngineering Advantages\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 6px;\"\u003eUniversal 3300 XL Compatibility\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003eThis extension cable interfaces seamlessly across Bently Nevada's standard 8mm and 11mm proximity systems. It reduces plant stock complexity by providing a standardized, multi-use replacement part for multiple sensor setups.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 6px;\"\u003eStable Electrical Impedance\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003eThe 24 AWG tinned copper core layout delivers constant internal impedance profiles. This allows for clean transmission of high-frequency eddy current signals over the full 4-meter length without attenuation or artificial phases.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #2c5282; font-size: 11pt; margin-top: 12px; margin-bottom: 16px;\"\u003eCorrosion-Resistant Tinned Strands\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 16px;\"\u003eThe conductor's tinned outer layer prevents copper oxidation caused by humid plant environments. This ensures low resistance at termination junctions over years of continuous equipment service.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 16px; padding: 0; font-size: 0; line-height: 0;\"\u003e \u003c\/p\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 14pt; margin-bottom: 12px;\"\u003eTechnical FAQs\u003c\/h2\u003e\n\n\u003cp style=\"margin-bottom: 8px; font-weight: bold; color: #2d3748;\"\u003eQ1: What does the \"-CN\" suffix indicate on this specific Bently Nevada part number?\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 16px; padding-left: 12px;\"\u003eA1: The \"-CN\" suffix indicates that this cable configuration includes country-specific agency approvals and compliance documents required for importing and installing industrial hardware within the region.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 8px; font-weight: bold; color: #2d3748;\"\u003eQ2: Can I splice two 4-meter cables together to create an 8-meter extension link?\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 16px; padding-left: 12px;\"\u003eA2: No, slicing or joining extension cables is strongly discouraged. Altering the calibrated length changes the overall system impedance, which causes severe errors in sensor gap and vibration tracking.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 8px; font-weight: bold; color: #2d3748;\"\u003eQ3: Is a Certificate of Origin available for this 330130-040-00-CN cable?\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 16px; padding-left: 12px;\"\u003eA3: Yes, an official Certificate of Origin can be issued upon request during order processing. Please verify your specific compliance requirements with our technical sales team before shipment.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 16px; padding: 0; font-size: 0; line-height: 0;\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"font-weight: bold; margin-bottom: 0;\"\u003eCommercial Contact Email: \u003ca href=\"mailto:sale@etowonauto.com\" style=\"color: #1a365d; text-decoration: underline;\"\u003esale@etowonauto.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047713800324,"sku":"330130-040-00-CN","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330130-040-00-CN-1.jpg?v=1779113353"},{"product_id":"bently-nevada-330930-045-00-cn-extension-cable-4-5m","title":"Bently Nevada 330930-045-00-CN Extension Cable | 4.5m","description":"\u003ch2\u003eBently Nevada 330930-045-00-CN Standard Extension Cable\u003c\/h2\u003e\n\u003cp\u003eEnsure reliable signal transmission with this genuine Bently Nevada extension cable. Perfect for industrial monitoring systems requiring precise data collection.\u003c\/p\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb style=\"color: #2c3e50;\"\u003eBrand:\u003c\/b\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #2c3e50;\"\u003eCondition:\u003c\/b\u003e New \u0026amp; Original\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #2c3e50;\"\u003ePart Number:\u003c\/b\u003e \u003cstrong\u003e330930-045-00-CN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #2c3e50;\"\u003eWarranty:\u003c\/b\u003e 12 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb style=\"color: #007bff;\"\u003eWeight:\u003c\/b\u003e 0.202 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #007bff;\"\u003eCable Length:\u003c\/b\u003e 4.5 metres (14.8 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #007bff;\"\u003eVoltage Rating:\u003c\/b\u003e 30 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #007bff;\"\u003eCurrent Rating:\u003c\/b\u003e 5 A maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #007bff;\"\u003eTemperature Range:\u003c\/b\u003e -40°C to +85°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #007bff;\"\u003eConnector Type:\u003c\/b\u003e Standard industrial connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConfiguration Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb style=\"color: #27ae60;\"\u003eLength Code -045:\u003c\/b\u003e 4.5 meter standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #27ae60;\"\u003eConnector Code -00:\u003c\/b\u003e Standard cable configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #27ae60;\"\u003eApproval Code -CN:\u003c\/b\u003e Country specific certifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCustomer Questions \u0026amp; Answers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb style=\"color: #8e44ad;\"\u003eQ: What does the CN suffix mean?\u003c\/b\u003e\u003cbr\u003eA: CN indicates country-specific approvals and certifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #8e44ad;\"\u003eQ: Is this cable suitable for outdoor use?\u003c\/b\u003e\u003cbr\u003eA: Yes, with proper protection from direct weather exposure\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #8e44ad;\"\u003eQ: What is the minimum bend radius?\u003c\/b\u003e\u003cbr\u003eA: Minimum 25mm bend radius recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #8e44ad;\"\u003eQ: Are other lengths available?\u003c\/b\u003e\u003cbr\u003eA: Yes, contact us for alternative length options\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"color: #8e44ad;\"\u003eQ: Is this an original Bently Nevada product?\u003c\/b\u003e\u003cbr\u003eA: Yes, genuine product with full manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eContact us at \u003ca href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e for technical support and pricing information.\u003c\/b\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047713865860,"sku":"330930-045-00-CN","price":208.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330930-045-00-CN-1.jpg?v=1760261859"},{"product_id":"armored-extension-cable-330930-045-02-00-bently-nevada","title":"Armored Extension Cable | 330930-045-02-00 Bently Nevada","description":"\u003ch2\u003eBently Nevada 3300 XL NSv Extension Cable\u003c\/h2\u003e\n\u003cp\u003eProfessional 4.5-meter armored extension cable designed for industrial vibration monitoring systems. The \u003cstrong\u003e330930-045-02-00\u003c\/strong\u003e delivers reliable signal transmission with superior physical protection.\u003c\/p\u003e\n\u003ch3\u003eProduct Identification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #0056b3;\"\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Model:\u003c\/strong\u003e \u003cstrong\u003e330930-045-02-00\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e 3300 XL NSv Extension Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Armored industrial grade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #0056b3;\"\u003eBase Model 330930:\u003c\/strong\u003e 3300 XL Standard Extension Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Code 045:\u003c\/strong\u003e 4.5 meters (14.8 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Code 02:\u003c\/strong\u003e With stainless steel armor, without FEP jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval Code 00:\u003c\/strong\u003e Agency approvals not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #0056b3;\"\u003eCable Length:\u003c\/strong\u003e 4.5 meters (14.8 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Distribution:\u003c\/strong\u003e 45 g\/m (0.5 oz\/ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Weight:\u003c\/strong\u003e 0.202 kg per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor Type:\u003c\/strong\u003e Stainless steel protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e Standard industrial grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Performance:\u003c\/strong\u003e Minimal interference transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #0056b3;\"\u003eExtended Reach:\u003c\/strong\u003e 4.5-meter length for flexible installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e Clean transmission over full distance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Handles rugged industrial conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliability:\u003c\/strong\u003e Consistent performance in demanding applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Standard connectors for quick setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupport \u0026amp; Ordering\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color: #0056b3;\"\u003eTechnical Support:\u003c\/strong\u003e \u003ca style=\"color: #0056b3; text-decoration: underline;\" href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Information:\u003c\/strong\u003e Complete specifications available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Guidance:\u003c\/strong\u003e Expert assistance provided\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder Processing:\u003c\/strong\u003e Fast shipment available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca style=\"color: #0056b3; font-weight: bold;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_NSv_Proximity_Transducer_System_Datasheet_-_147385.pdf?v=1740020698\"\u003eDownload Complete Technical Specifications PDF\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047713996932,"sku":"330930-045-02-00","price":231.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330930-045-02-00.jpg?v=1760255472"},{"product_id":"330101-00-11-10-02-cn-3300-xl-probe-bently-nevada","title":"330101-00-11-10-02-CN | 3300 XL Probe Bently Nevada","description":"\u003ch2 style=\"color: #d95b34; font-weight: bold;\"\u003eBently Nevada 330101-00-11-10-02-CN 3300 XL 8 mm Probe\u003c\/h2\u003e\n\u003cp\u003eBently Nevada \u003cstrong\u003e330101-00-11-10-02-CN\u003c\/strong\u003e 3300 XL 8 mm proximity probe. 3\/8-24 UNF thread without armor, 1.1 in case length, 1.0 m standard cable. \u003c\/p\u003e\n\u003ch3 style=\"color: #d95b34;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct No.:\u003c\/strong\u003e \u003cstrong\u003e330101-00-11-10-02-CN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3300 XL 8 mm Probe, 3\/8-24 UNF thread without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.323 kg (11.4 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #d95b34;\"\u003eConfiguration Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 00 = 0.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 11 = 1.1 inches (28 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 10 = 1.0 meter (3.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e 02 = Miniature coaxial ClickLoc connector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e CN = Country-specific approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #d95b34;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 303\/304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75Ω triaxial, FEP insulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance (1.0m):\u003c\/strong\u003e 7.59Ω ±0.50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 2.0 mm (80 mils), 0.25 to 2.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -52°C to +177°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Torque:\u003c\/strong\u003e Max 33.9 N•m, Rec 11.2 N•m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #d95b34;\"\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330101-00-11-10-02-CN\u003c\/strong\u003e proximity probe\u003c\/li\u003e\n\u003cli\u003eLock nut\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003cli\u003eShipping: FedEx, UPS, DHL\u003c\/li\u003e\n\u003cli\u003e12-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #d95b34;\"\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Thread and case length?\u003c\/strong\u003e\u003cbr\u003eA: 3\/8-24 UNF thread without armor, 1.1 in case length, 1.0 m cable, ClickLoc connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Weight and approvals?\u003c\/strong\u003e\u003cbr\u003eA: 0.323 kg weight. CN option for country-specific approvals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Temperature range?\u003c\/strong\u003e\u003cbr\u003eA: -52°C to +177°C operating temperature. Standard 3300 XL 8 mm probe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eContact: \u003ca style=\"color: #d95b34; font-weight: bold;\" href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047714521220,"sku":"330101-00-11-10-02-CN","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-11-10-02-CN.jpg?v=1775396516"},{"product_id":"bently-nevada-330101-00-11-20-02-05-2m-8mm-proximity-probe","title":"Bently Nevada 330101-00-11-20-02-05 2m 8mm Proximity Probe","description":"\u003ch2 style=\"color: #2c3e50;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e\n  The \u003cstrong\u003eBently Nevada 330101-00-11-20-02-05\u003c\/strong\u003e is a high-performance 3300 XL 8 mm proximity probe engineered for critical machinery protection. Designed for non-contacting displacement and vibration measurements, this sensor is a staple in industrial environments where precision and reliability are paramount for rotating equipment health.\n\u003c\/p\u003e\n\u003cp\u003e\n  This configuration features a 1.1-inch (27.9 mm) overall case length and an extended 2.0-meter (6.6 feet) total length. With a \u003cstrong\u003eweight of 0.323 kg\u003c\/strong\u003e, it is optimized for ease of installation and high-fidelity signal transmission, carrying essential global certifications like CSA, ATEX, and IECEx for hazardous area deployment.\n\u003c\/p\u003e\n\n\u003ch2 style=\"color: #2c3e50;\"\u003eTechnical Configuration\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; border: 1px solid #ccc; margin-bottom: 20px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f8f9fa;\"\u003e\n      \u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eParameter\u003c\/th\u003e\n      \u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eModel Code\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e330101-00-11-20-02-05\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eProbe Tip Diameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e8 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eUnthreaded Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e0 mm (Option 00)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eTotal Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e2.0 Meters (6.6 Feet)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eMiniature coaxial ClickLoc™\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #2c3e50;\"\u003eKey Performance Features\u003c\/h2\u003e\n\u003cul style=\"line-height: 1.6;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuperior Signal Quality:\u003c\/strong\u003e Utilizes a 75-ohm triaxial FEP-insulated cable, specifically designed to enhance signal integrity and withstand harsh chemical exposure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExplosion-Proof Security:\u003c\/strong\u003e Holds multiple agency approvals including ATEX and IECEx, making it suitable for volatile industrial scenarios in oil, gas, and power generation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMechanical Durability:\u003c\/strong\u003e The 3300 XL series is built to operate in extreme industrial conditions, providing long-lasting stability for radial vibration and axial position monitoring.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface Mount Friendly:\u003c\/strong\u003e The 0 mm unthreaded configuration allows for flush-mounting on machine surfaces where space is a constraint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #2c3e50;\"\u003eInstallation Guidelines\u003c\/h2\u003e\n\u003cp\u003e\n  The 330101-00-11-20-02-05 is primarily used on fluid-film bearing machines. For accurate gapping, we recommend a standard setting of -9 Vdc. The ClickLoc™ connector provides a dependable, vibration-proof link, but it is advised to use connector protectors in environments where high levels of oil or conductive contaminants are present.\n\u003c\/p\u003e\n\n\u003ch2 style=\"color: #2c3e50;\"\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is the benefit of the 0mm unthreaded length?\u003c\/strong\u003e\u003cbr\u003e\nA1: This means the entire case is threaded, providing the maximum possible adjustment range and enabling mounting in thin-walled housings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ2: Is this probe compatible with standard 3300 XL Proximitors?\u003c\/strong\u003e\u003cbr\u003e\nA2: Yes, it is fully compatible with the 3300 XL Proximitor® Sensor and extension cables of matching total length.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ3: How does the FEP-insulated cable perform in high heat?\u003c\/strong\u003e\u003cbr\u003e\nA3: FEP insulation provides excellent thermal stability, allowing the probe cable to maintain performance in temperatures often exceeding standard industrial ranges.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e This product includes a 12-month standard industrial warranty.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047714586756,"sku":"330101-00-11-20-02-05","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-11-20-02-05.jpg?v=1776342548"},{"product_id":"330101-00-18-10-02-00-bently-nevada-3300-xl-probe-1-8in-case","title":"330101-00-18-10-02-00 Bently Nevada 3300 XL Probe 1.8in Case","description":"\u003ch2\u003eBently Nevada 330101-00-18-10-02-00 3300 XL 8mm Vibration Probe\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Bently Nevada | \u003cstrong\u003eModel:\u003c\/strong\u003e 330101-00-18-10-02-00 | \u003cstrong\u003eSeries:\u003c\/strong\u003e 3300 XL | \u003cstrong\u003eWeight:\u003c\/strong\u003e 0.323 kg per meter\u003c\/p\u003e\n\u003ch3\u003eCore Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThread Type: 3\/8-24 UNF\u003c\/li\u003e\n\u003cli\u003eCase Length: 18 = 1.8 inches (45.7 mm)\u003c\/li\u003e\n\u003cli\u003eUnthreaded Length: 00 = 0 inches (full thread)\u003c\/li\u003e\n\u003cli\u003eTotal Cable Length: 10 = 1.0 meter (3.3 feet)\u003c\/li\u003e\n\u003cli\u003eConnector Type: 02 = ClickLoc (standard cable)\u003c\/li\u003e\n\u003cli\u003eApproval: 00 = Not required\u003c\/li\u003e\n\u003cli\u003eWeight: 323 g\/m (11.4 oz per meter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable Pull Strength: 330 N (75 lbf) with CableLoc technology\u003c\/li\u003e\n\u003cli\u003eMinimum Bend Radius: 25.4 mm (1.0 inch)\u003c\/li\u003e\n\u003cli\u003eCase Material: AISI 303 or 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eProbe Tip: Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003ePressure Seal: Viton O-ring, 5 bar (72.5 psi) rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSignal Accuracy: ±0.025 mm (±1 mil) deviation\u003c\/li\u003e\n\u003cli\u003eCapacitance: 69.9 pF\/m ±5% tolerance\u003c\/li\u003e\n\u003cli\u003eDC Resistance: 7.45 ±0.50 Ω (center to outer conductor)\u003c\/li\u003e\n\u003cli\u003eVoltage Rating: 500V AC withstand\u003c\/li\u003e\n\u003cli\u003eCable Type: 750 triaxial, FEP insulated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnvironmental Ratings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temp: -52°C to +177°C (-62°F to +350°F)\u003c\/li\u003e\n\u003cli\u003eHumidity Stability: \u0026lt;3% ASF change after 56 days at 93% RH\u003c\/li\u003e\n\u003cli\u003eField Wiring: 24-16 AWG shielded triad cable, max 305 meters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330101-00-18-10-02-00 Probe (1.0m length)\u003c\/li\u003e\n\u003cli\u003eConnector protector\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047715209348,"sku":"330101-00-18-10-02-00","price":126.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-18-10-02-00.jpg?v=1779719535"},{"product_id":"330101-00-19-10-01-cn-bently-nevada-3300-xl-metric-probe","title":"330101-00-19-10-01-CN Bently Nevada | 3300 XL Metric Probe","description":"\u003ch2 style=\"color: #0056b3; font-weight: bold;\"\u003eBently Nevada 330101-00-19-10-01-CN 3300 XL 8 mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eBently Nevada \u003cstrong\u003e330101-00-19-10-01-CN\u003c\/strong\u003e 3300 XL 8 mm proximity probe. 3\/8-24 UNF thread without armor, 1.9 in case length, 1.0 m standard cable. \u003c\/p\u003e\n\u003ch3 style=\"color: #0056b3;\"\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct No.:\u003c\/strong\u003e \u003cstrong\u003e330101-00-19-10-01-CN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3300 XL 8 mm Proximity Probe, Metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e 3\/8-24 UNF, without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.323 kg (11.4 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #0056b3;\"\u003eConfiguration Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 00 = 0.0 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 19 = 1.9 in (48 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 10 = 1.0 metre (3.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e 01 = Miniature coaxial ClickLoc™ with connector protector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e CN = Country-specific approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #0056b3;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 303\/304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75Ω triaxial, FEP insulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance (1.0m):\u003c\/strong\u003e 7.59Ω ±0.50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 2.0 mm (80 mils), 0.25 to 2.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -52°C to +177°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Torque:\u003c\/strong\u003e Max 33.9 N•m, Rec 11.2 N•m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #0056b3;\"\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330101-00-19-10-01-CN\u003c\/strong\u003e proximity probe\u003c\/li\u003e\n\u003cli\u003eLock nut\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003cli\u003eShipping: FedEx, UPS, DHL\u003c\/li\u003e\n\u003cli\u003e12-month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #0056b3;\"\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Thread and case length?\u003c\/strong\u003e\u003cbr\u003eA: 3\/8-24 UNF thread without armor, 1.9 in case length, 1.0 m cable, ClickLoc with protector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Weight and approvals?\u003c\/strong\u003e\u003cbr\u003eA: 0.323 kg weight. CN option for country-specific approvals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Temperature range?\u003c\/strong\u003e\u003cbr\u003eA: -52°C to +177°C operating temperature. Standard 3300 XL 8 mm probe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eContact: \u003ca style=\"color: #0056b3; font-weight: bold;\" href=\"mailto:sale@etowonauto.com\"\u003esale@etowonauto.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047715405956,"sku":"330101-00-19-10-01-CN","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-19-10-01-CN.jpg?v=1775396039"},{"product_id":"bently-nevada-330101-00-28-10-02-00-proximity-probe","title":"Bently Nevada 330101-00-28-10-02-00 Proximity Probe","description":"\u003ch2 style=\"color: #1a365d; font-size: 13pt; margin-top: 0; margin-bottom: 8px;\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003eThe \u003cstrong style=\"color: #1a365d;\"\u003eBently Nevada 330101-00-28-10-02-00\u003c\/strong\u003e is a high-performance proximity probe engineered for industrial machinery protection systems, offering precision shaft vibration, gap, and displacement monitoring. This eddy current sensor configuration features a 0.0-inch unthreaded length combined with a 2.8-inch overall case length. It comes equipped with a 1.0-meter (3.3 feet) integrated standard coaxial cable terminated with a miniature coaxial ClickLoc™ connector. Designed for general industrial deployments where hazardous area certifications are not required (-00 approval option), this probe operates reliably within a steady 12-24 V DC power supply voltage range. With an overall net hardware weight of 0.323 kg, it delivers exceptionally stable machinery diagnostics across pumps, fans, compressors, and generator sets.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 13pt; margin-bottom: 8px;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; min-width: 400px; margin-bottom: 12px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f7fafc; border-bottom: 2px solid #cbd5e0;\"\u003e\n      \u003cth style=\"padding: 6px; text-align: left; font-weight: bold; color: #2d3748; font-size: 10pt; border: 1px solid #e2e8f0;\"\u003eParameter\u003c\/th\u003e\n      \u003cth style=\"padding: 6px; text-align: left; font-weight: bold; color: #2d3748; font-size: 10pt; border: 1px solid #e2e8f0;\"\u003eSpecification Details\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0; width: 35%;\"\u003eManufacturer\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003eBently Nevada\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eFull Part Number\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e330101-00-28-10-02-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eUnthreaded Case Length\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e0.0 inches (Fully threaded body)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eOverall Case Length\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e2.8 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eTotal Cable Length\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e1.0 meter (3.3 feet) nominal\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003eConnector \u0026amp; Cable Type\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003eMiniature coaxial ClickLoc™ connector \/ Standard cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eMeasurement Sensitivity\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e0.4 V\/mm (linear tracking response)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eFrequency Response Range\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e1 Hz to 10 kHz (dynamic vibration capturing)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eOperating Temperature\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e-40°C to +100°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f8fafc;\"\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eAgency Approvals\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003eNot required \/ Standard industrial zone profile (-00 option)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 6px; font-weight: bold; border: 1px solid #e2e8f0;\"\u003eComponent Net Weight\u003c\/td\u003e\n      \u003ctd style=\"padding: 6px; border: 1px solid #e2e8f0;\"\u003e0.323 kg (0.71 lbs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 13pt; margin-bottom: 8px;\"\u003eInstallation \u0026amp; Handling Guidelines\u003c\/h2\u003e\n\u003cp style=\"margin-bottom: 12px;\"\u003e\u003cstrong\u003ePhysical Setup:\u003c\/strong\u003e Ensure the mounting bracket can comfortably house the 2.8-inch fully threaded casing. Take care not to twist or kink the standard FEP cable during insertion into the machine housing. Maintain a gentle cable loop profile to prevent damage to the core wire segments.\u003cbr\u003e\n\u003cstrong\u003eElectrical Connection:\u003c\/strong\u003e Fasten the miniature ClickLoc™ connector firmly to the downstream extension cable assembly. Verify that the system power supply provides a clean, regulated 12-24 V DC signal input to prevent unexpected measuring drifts or errors within the 1 Hz to 10 kHz monitoring loop.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1a365d; font-size: 13pt; margin-bottom: 8px;\"\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp style=\"margin-bottom: 4px; font-weight: bold; color: #2d3748;\"\u003eQ1: What is the measurement sensitivity profile of this proximity probe?\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 12px; padding-left: 8px;\"\u003eA1: The 330101-00-28-10-02-00 features a highly calibrated electrical sensitivity output of 0.4 V\/mm, allowing for exact monitoring of microscopic shaft clearances.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 4px; font-weight: bold; color: #2d3748;\"\u003eQ2: What are the exact dimensions of this probe's threaded casing?\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 12px; padding-left: 8px;\"\u003eA2: This unit is configured with a 0.0-inch unthreaded length and a 2.8-inch overall case length, meaning the outer probe body is fully threaded across its entire span.\u003c\/p\u003e\n\n\u003cp style=\"margin-bottom: 4px; font-weight: bold; color: #2d3748;\"\u003eQ3: Can this specific probe configuration be deployed in hazardous areas?\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 12px; padding-left: 8px;\"\u003eA3: No. The final \"00\" suffix indicates that agency approvals are not required, meaning this specific variant is built exclusively for general-purpose industrial applications.\u003c\/p\u003e\n\n\u003cp style=\"font-weight: bold; margin-bottom: 0;\"\u003eCommercial Contact Email: \u003ca href=\"mailto:sale@etowonauto.com\" style=\"color: #1a365d; text-decoration: underline;\"\u003esale@etowonauto.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047716225156,"sku":"330101-00-28-10-02-00","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-28-10-02-00.jpg?v=1779713574"},{"product_id":"330101-00-36-10-02-00-bently-nevada-3-8-24-unf-thread-probe","title":"330101-00-36-10-02-00 Bently Nevada 3\/8 24 UNF Thread Probe","description":"\u003ch2\u003eBently Nevada 330101-00-36-10-02-00 – 3300 XL 8mm Proximity Probe\u003c\/h2\u003e\n\n\u003cp\u003eThe Bently Nevada 330101-00-36-10-02-00 is a 3300 XL series 8 mm proximity probe for precision monitoring applications. It features 3\/8-24 UNF thread, 0 inch unthreaded length, and 3.6 inch overall case length. This probe includes 1.0 metre standard cable with miniature coaxial ClickLoc connector.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBrand: Bently Nevada\u003c\/li\u003e\n\u003cli\u003ePart Number: 330101-00-36-10-02-00\u003c\/li\u003e\n\u003cli\u003eModel: 3300 XL 8 mm Probe\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/8-24 UNF\u003c\/li\u003e\n\u003cli\u003eUnthreaded Length: 0.0 inches (00 option)\u003c\/li\u003e\n\u003cli\u003eOverall Case Length: 3.6 inches (36 option)\u003c\/li\u003e\n\u003cli\u003eTotal Cable Length: 1.0 metre or 3.3 feet (10 option)\u003c\/li\u003e\n\u003cli\u003eConnector Type: Miniature coaxial ClickLoc connector with standard cable (02 option)\u003c\/li\u003e\n\u003cli\u003eAgency Approvals: Not required (00 option)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.323 kg (0.71 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDistinctive features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eStreamlined installation for reduced setup time\u003c\/li\u003e\n\u003cli\u003eSensitive measurement capable of detecting minute changes\u003c\/li\u003e\n\u003cli\u003eLightweight design minimizes load on machinery\u003c\/li\u003e\n\u003cli\u003eRobust performance in challenging industrial environments\u003c\/li\u003e\n\u003cli\u003eMaintenance friendly with long intervals between checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eTemperature resilience across wide temperature spectrum\u003c\/li\u003e\n\u003cli\u003eFlexible connector options for adaptable installations\u003c\/li\u003e\n\u003cli\u003eVibration tolerance maintaining accuracy under dynamic conditions\u003c\/li\u003e\n\u003cli\u003eIngress protection against dust and moisture\u003c\/li\u003e\n\u003cli\u003eMultiple length configurations for specific applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eOne Bently Nevada 330101-00-36-10-02-00 proximity probe\u003c\/li\u003e\n\u003cli\u003e1.0 metre cable with ClickLoc connector\u003c\/li\u003e\n\u003cli\u003eWeight: 0.323 kg (0.71 lbs)\u003c\/li\u003e\n\u003cli\u003eShipping: FedEx, UPS, DHL\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003eQ: What is the case length of Bently Nevada 330101-00-36-10-02-00?\u003c\/p\u003e\n\u003cp\u003eA: 3.6 inches overall case length with 0 inch unthreaded length.\u003c\/p\u003e\n\n\u003cp\u003eQ: What connector does this probe use?\u003c\/p\u003e\n\u003cp\u003eA: Miniature coaxial ClickLoc connector with standard cable.\u003c\/p\u003e\n\n\u003cp\u003eQ: What is the weight of 330101-00-36-10-02-00?\u003c\/p\u003e\n\u003cp\u003eA: 0.323 kg (0.71 lbs).\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047716552836,"sku":"330101-00-36-10-02-00","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-36-10-02-00.jpg?v=1779715959"},{"product_id":"330101-00-48-10-02-ru-3300-xl-8mm-probe-bently-nevada","title":"330101-00-48-10-02-RU 3300 XL 8mm Probe | Bently Nevada","description":"\u003cp\u003eThe Bently Nevada \u003cstrong\u003e330101-00-48-10-02-RU\u003c\/strong\u003e is a 3300 XL 8 mm Probe for industrial vibration monitoring. It features 1.0 metre cable with ClickLoc connector and country specific RU approval. \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBasic Details\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2c3e50;\"\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e330101-00-48-10-02-RU\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2c3e50;\"\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e\u003c\/span\u003e 3300 XL 8 mm Probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2c3e50;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/span\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2c3e50;\"\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e\u003c\/span\u003e Made in U.S.A\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2c3e50;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/span\u003e 0.323 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eOption Descriptions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #28a745;\"\u003e\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e\u003c\/span\u003e 00 = 0.0 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #28a745;\"\u003e\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e\u003c\/span\u003e 48 = 4.8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #28a745;\"\u003e\u003cstrong\u003eTotal Length:\u003c\/strong\u003e\u003c\/span\u003e 10 = 1.0 metre (3.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #28a745;\"\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e\u003c\/span\u003e 02 = Miniature coaxial ClickLoc connector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #28a745;\"\u003e\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e\u003c\/span\u003e RU = Country specific approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePerformance Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #007bff;\"\u003e\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e\u003c\/span\u003e -20°C to +70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #007bff;\"\u003e\u003cstrong\u003eResponse Time:\u003c\/strong\u003e\u003c\/span\u003e 10 ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #007bff;\"\u003e\u003cstrong\u003eVoltage Rating:\u003c\/strong\u003e\u003c\/span\u003e 12 - 24 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #007bff;\"\u003e\u003cstrong\u003eCurrent Output:\u003c\/strong\u003e\u003c\/span\u003e 4-20 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #007bff;\"\u003e\u003cstrong\u003eSignal Frequency Range:\u003c\/strong\u003e\u003c\/span\u003e 0.1 Hz to 1 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #dc3545;\"\u003e\u003cstrong\u003eImpact Resistance:\u003c\/strong\u003e\u003c\/span\u003e 600 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #dc3545;\"\u003e\u003cstrong\u003eVibration Resistance:\u003c\/strong\u003e\u003c\/span\u003e 10 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #dc3545;\"\u003e\u003cstrong\u003eCalibration Interval:\u003c\/strong\u003e\u003c\/span\u003e 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #dc3545;\"\u003e\u003cstrong\u003eHumidity Rating:\u003c\/strong\u003e\u003c\/span\u003e 0% to 95% (non-condensing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #dc3545;\"\u003e\u003cstrong\u003eLead Length:\u003c\/strong\u003e\u003c\/span\u003e 2 m standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the cable length of 330101-00-48-10-02-RU?\u003c\/strong\u003e \u003cbr\u003eThe \u003cstrong\u003e330101-00-48-10-02-RU\u003c\/strong\u003e has 1.0 metre (3.3 feet) total cable length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the output signal?\u003c\/strong\u003e \u003cbr\u003eThis probe provides 4-20 mA current output for industrial monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the weight of this probe?\u003c\/strong\u003e \u003cbr\u003eThe probe weighs 0.323 kg.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047716847748,"sku":"330101-00-48-10-02-RU","price":261.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-00-48-10-02-RU.jpg?v=1775399018"},{"product_id":"330101-02-32-10-02-cn-thread-probe-bently-nevada","title":"330101-02-32-10-02-CN Thread Probe Bently Nevada","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e\n  The \u003cstrong\u003eBently Nevada 330101-02-32-10-02-CN\u003c\/strong\u003e is a high-precision 3300 XL 8mm proximity probe, internationally recognized for radial vibration and axial position monitoring. This model features a \u003cstrong\u003e3\/8-24 UNF thread\u003c\/strong\u003e and a 3.2-inch stainless steel case, optimized for critical rotating machinery protection.\n\u003c\/p\u003e\n\u003cp\u003e\n  Proudly \u003cstrong\u003eMade in the U.S.A.\u003c\/strong\u003e and including the \u003cstrong\u003eCN (Country Specific \/ COO)\u003c\/strong\u003e certification option, this probe ensures compliance for international projects requiring official documentation of origin.\n\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Configuration\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 330101 (3300 XL 8mm Proximity Probe)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnthreaded Length (-02):\u003c\/strong\u003e 0.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Case Length (-32):\u003c\/strong\u003e 3.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Length (-10):\u003c\/strong\u003e 1.0 meter (3.3 feet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector Option (-02):\u003c\/strong\u003e ClickLoc™ miniature coaxial connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgency Approval (-CN):\u003c\/strong\u003e Country Specific (Certificate of Origin provided)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; border: 1px solid #ccc;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f2f2f2;\"\u003e\n      \u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eParameter\u003c\/th\u003e\n      \u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e0.25 to 2.3 mm (10 to 90 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e200 mV\/mil (7.87 V\/mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eThermal Range (Tip)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e-52°C to +218°C (-62°F to +424°F)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003ePull Strength\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e330 N (75 lb) probe-to-cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eIEC 68-2-3 (Humidity), API 670\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Innovations\u003c\/h2\u003e\n\u003cp\u003e\n  The 3300 XL series introduces patented \u003cstrong\u003eTipLoc™ bonding\u003c\/strong\u003e, which creates a chemical and mechanical bond between the probe tip and the body, making it 40% stronger than previous generations. Additionally, the \u003cstrong\u003eCableLoc™ design\u003c\/strong\u003e provides a secure attachment that resists the high pulling forces common during installation in complex machinery housings.\n\u003c\/p\u003e\n\n\u003ch2\u003eInstallation \u0026amp; Best Practices\u003c\/h2\u003e\n\u003cp\u003e\n  For accurate vibration measurement, gapping is critical. This probe is designed for an optimal gap of approximately -9 Vdc. The 1.0m total length must be combined with a compatible 3300 XL extension cable to meet the required 5.0m or 9.0m total system electrical length.\n\u003c\/p\u003e\n\n\u003ch2\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What does the \"CN\" suffix indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1: The CN option is often used for orders requiring specific Country of Origin (COO) certificates or documentation for customs and project compliance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ2: Is this probe compatible with older 3300 systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA2: Yes, the 3300 XL 8mm probes are backward compatible with non-XL 3300 Proximitor® sensors, though system performance is maximized when used with XL components.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ3: Does the cable resist oil and chemicals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA3: Yes, the cable is FEP insulated, providing excellent resistance to corrosive fluids and moisture (tested up to 93% relative humidity).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDownload Datasheet:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf\" target=\"_blank\"\u003eAccess PDF Specifications\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047717404804,"sku":"330101-02-32-10-02-CN","price":236.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-02-32-10-02-CN.jpg?v=1775902512"},{"product_id":"bently-nevada-330101-33-53-10-12-cn-1-0m-fluidloc-probe","title":"Bently Nevada 330101-33-53-10-12-CN 1.0m FluidLoc Probe","description":"\u003ch2\u003eBently Nevada 330101-33-53-10-12-CN 3300 XL 8mm Probe\u003c\/h2\u003e\n\u003cp\u003eNon-armored proximity probe with 3\/8-24 UNF thread. Features FluidLoc cable and ClickLoc connector for reliable machine monitoring.\u003c\/p\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct No:\u003c\/strong\u003e \u003cspan style=\"color: #c00000;\"\u003e330101-33-53-10-12-CN\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3300 XL 8mm Probe, 3\/8-24 UNF thread, without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 kg (0.44 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Information Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e33\u003c\/strong\u003e - Unthreaded Length: 3.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e53\u003c\/strong\u003e - Overall Case Length: 5.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e - Total Length: 1.0 metre (3.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12\u003c\/strong\u003e - Connector and Cable: Miniature coaxial ClickLoc connector, FluidLoc cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCN\u003c\/strong\u003e - Agency Approval: Country specific approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Pressure:\u003c\/strong\u003e 800 psi (55 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e \u003cspan style=\"color: #c00000;\"\u003e-25°C to +70°C (-13°F to +158°F)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Signal Type:\u003c\/strong\u003e 0-10 VDC or 4-20 mA (selectable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e DC to 10 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity Rating:\u003c\/strong\u003e Up to 95% non-condensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8-24 UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Diameter:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003cstrong\u003e330101-33-53-10-12-CN\u003c\/strong\u003e 8mm probe\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFedEx, UPS, DHL worldwide shipping\u003c\/li\u003e\n\u003cli\u003eExpedited options available\u003c\/li\u003e\n\u003cli\u003eAnti-static protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the cable length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: 1.0 metre (3.3 feet) total length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What output signals does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Selectable 0-10 VDC or 4-20 mA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the temperature range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: -25°C to +70°C (-13°F to +158°F).\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047717601412,"sku":"330101-33-53-10-12-CN","price":248.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-33-53-10-12-CN-2.jpg?v=1775397871"},{"product_id":"330101-50-80-10-11-00-8mm-probe-bently-nevada","title":"330101-50-80-10-11-00 | 8mm Probe Bently Nevada","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e\n  The \u003cstrong\u003eBently Nevada 330101-50-80-10-11-00\u003c\/strong\u003e is an industrial-grade 3300 XL 8mm proximity probe, engineered for high-precision vibration and position monitoring in critical machinery. This specific configuration features a \u003cstrong\u003elong 8.0-inch case length\u003c\/strong\u003e and \u003cstrong\u003estainless steel armor\u003c\/strong\u003e, providing exceptional mechanical protection for deep-reach applications.\n\u003c\/p\u003e\n\u003cp\u003e\n  Utilizing patented \u003cstrong\u003eTipLoc® bonding\u003c\/strong\u003e and \u003cstrong\u003eFluidLock™ protection\u003c\/strong\u003e, this probe is designed to withstand 2 bar differential pressure and prevent fluid ingress, making it the ideal solution for turbines and compressors operating in harsh environments.\n\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Configuration\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 330101 (3300 XL 8mm Proximity Probe)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnthreaded Length (-50):\u003c\/strong\u003e 5.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Case Length (-80):\u003c\/strong\u003e 8.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Length (-10):\u003c\/strong\u003e 1.0 meter (3.3 feet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector \u0026amp; Armor Option (-11):\u003c\/strong\u003e Miniature ClickLoc™ connector with stainless steel armor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgency Approval (-00):\u003c\/strong\u003e None (Standard Industrial)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; border: 1px solid #ccc;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f2f2f2;\"\u003e\n      \u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"border: 1px solid #ccc; padding: 10px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eLinear Range\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e0.25 to 2.3 mm (10 to 90 mils)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e7.87 V\/mm (200 mV\/mil) ±5%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eTemp Resilience (Tip)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e-52°C to +218°C (-62°F to +424°F)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003eCable Armor\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003eFlexible Stainless Steel (AISI 302)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e\u003cstrong\u003ePull Strength\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #ccc; padding: 10px;\"\u003e330 N (75 lb) probe-to-cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePrecision Engineering \u0026amp; Benefits\u003c\/h2\u003e\n\u003cp\u003e\n  The 3300 XL series sets the standard for eddy current sensors. The \u003cstrong\u003eFluidLock™\u003c\/strong\u003e Viton® O-ring seal prevents oil or other process fluids from leaking through the probe cable, while the triple-layer shielding ensures signal integrity by maintaining interference levels below 0.5μV\/m.\n\u003c\/p\u003e\n\n\u003ch2\u003eInstallation \u0026amp; Application\u003c\/h2\u003e\n\u003cp\u003e\n  With its 8.0\" case length, this probe is perfect for machines where the mounting port is recessed or requires significant penetration through outer casings. It is fully compatible with \u003cstrong\u003e3300 XL Proximitor® Sensors\u003c\/strong\u003e. To ensure the highest accuracy, maintain the recommended gap setting during installation to capture the full 0.25-2.3mm linear range.\n\u003c\/p\u003e\n\n\u003ch2\u003eTechnical FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is the benefit of the \"-11\" armor option?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1: The stainless steel armor protects the coaxial cable from crushing, abrasion, and accidental cutting during maintenance or in high-debris environments.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ2: Can this probe handle high pressure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA2: Yes, the FluidLock™ design is rated to prevent fluid bypass up to 2 bar (29 psi) of differential pressure across the probe tip.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ3: Is the cable length adjustable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA3: This probe is a fixed 1.0-meter length. It must be paired with the correct 3300 XL extension cable to reach the required system total length (typically 5.0m or 9.0m).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDownload Datasheet:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf\" target=\"_blank\"\u003eAccess PDF Specifications\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047717699716,"sku":"330101-50-80-10-11-00","price":181.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330101-50-80-10-11-00.jpg?v=1775903666"},{"product_id":"bently-nevada-8mm-probe-330102-00-24-10-02-05-2-4-case","title":"Bently Nevada 8mm Probe 330102-00-24-10-02-05 2.4 Case","description":"\u003ch3 style=\"color: #0066cc; border-left: 4px solid #0066cc; padding-left: 8px;\"\u003eBently Nevada 3300 XL 8mm Proximity Probe\u003c\/h3\u003e\n\u003cp style=\"font-size: 18px; color: #2d2d2d; margin-bottom: 20px;\"\u003eFull Model: \u003cspan style=\"color: #0066cc; font-weight: bold;\"\u003e330102-00-24-10-02-05\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #0066cc; border-left: 4px solid #0066cc; padding-left: 8px;\"\u003eSuffix Configuration\u003c\/h3\u003e\n\u003cul style=\"list-style: none; padding-left: 0;\"\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong style=\"color: #0066cc;\"\u003e00:\u003c\/strong\u003e 0 inch unthreaded length\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong style=\"color: #0066cc;\"\u003e24:\u003c\/strong\u003e 2.4 inch case length\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong style=\"color: #0066cc;\"\u003e10:\u003c\/strong\u003e 1.0 metre total probe length\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong style=\"color: #0066cc;\"\u003e02:\u003c\/strong\u003e ClickLoc Mini Coaxial connector with armor\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong style=\"color: #0066cc;\"\u003e05:\u003c\/strong\u003e 5.0 metre extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #0066cc; border-left: 4px solid #0066cc; padding-left: 8px;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul style=\"list-style: none; padding-left: 0;\"\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eCase Length:\u003c\/strong\u003e 2.4 inches (Option 24)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eTotal System Length:\u003c\/strong\u003e 1.0m probe + 5.0m extension = 6.0 metres total\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8-24 UNF (Max 0.563 inch \/ 14.3mm depth)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e \u003cspan style=\"color: #cc0000; font-weight: bold;\"\u003eApproximately 323 grams\u003c\/span\u003e (1.0 metre probe only)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eWeight Density:\u003c\/strong\u003e 323 g\/m (11.4 oz\/ft)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e PPS Polymer\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e ClickLoc Mini Coaxial (Option 02) with armor\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eHumidity Stability:\u003c\/strong\u003e \u0026lt;3% ASF @ 93% RH (56-day IEC 68-2-3 test)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eWire Compatibility:\u003c\/strong\u003e 16-24 AWG, max 305m (1,000 ft) field wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #0066cc; border-left: 4px solid #0066cc; padding-left: 8px;\"\u003ePerformance Specifications\u003c\/h3\u003e\n\u003cul style=\"list-style: none; padding-left: 0;\"\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eStandard Operating Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +350°F)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eCable Endurance Temperature:\u003c\/strong\u003e Up to +260°C (+500°F)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eLinear Detection Range:\u003c\/strong\u003e 0.25mm to 2.3mm (10 to 90 mils)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eOptimal Gap:\u003c\/strong\u003e -9Vdc @ 1.27mm target distance\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 10px;\"\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0.5Hz to 12kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #0066cc; border-left: 4px solid #0066cc; padding-left: 8px;\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul style=\"list-style: none; padding-left: 0;\"\u003e\n\u003cli style=\"margin-bottom: 15px;\"\u003e\n\u003cstrong\u003eQ: What does suffix 24 indicate on model 330102-00-24-10-02-05?\u003c\/strong\u003e\u003cbr\u003eA: Suffix 24 indicates a 2.4 inch overall case length for the probe.\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 15px;\"\u003e\n\u003cstrong\u003eQ: What is the total system length including extension cable?\u003c\/strong\u003e\u003cbr\u003eA: Suffix 10 = 1.0 metre probe plus suffix 05 = 5.0 metre extension, total 6.0 metres from tip to connector.\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 15px;\"\u003e\n\u003cstrong\u003eQ: What is the weight of this probe?\u003c\/strong\u003e\u003cbr\u003eA: The 1.0 metre probe weighs approximately \u003cstrong\u003e323 grams\u003c\/strong\u003e. Weight density is 323 g\/m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top: 25px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf?v=1739784146\" style=\"background-color: #0066cc; color: white; padding: 10px 20px; text-decoration: none; border-radius: 5px; display: inline-block;\" target=\"_blank\"\u003eDownload Product Datasheet PDF\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047717929092,"sku":"330102-00-24-10-02-05","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330102-00-24-10-02-05.jpg?v=1772108049"},{"product_id":"bently-nevada-330102-00-40-05-01-00-3300-xl-8mm-probe","title":"Bently Nevada 330102-00-40-05-01-00 3300 XL 8mm Probe","description":"\u003ch2 style=\"color: #d84315; text-align: center; margin-bottom: 15px;\"\u003e⚙️ BENTLY NEVADA 3300 XL 8 MM PROBE | 330102-00-40-05-01-00\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff5722; font-weight: 600;\"\u003eManufacturer:\u003c\/span\u003e \u003cstrong\u003eBently Nevada\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff5722; font-weight: 600;\"\u003eModel:\u003c\/span\u003e \u003cstrong\u003e330102-00-40-05-01-00\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff5722; font-weight: 600;\"\u003eProduct Type:\u003c\/span\u003e \u003cstrong\u003e3300 XL 8 mm Probe\u003c\/strong\u003e with 3\/8-24 UNF thread and armor\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff5722; font-weight: 600;\"\u003eWeight:\u003c\/span\u003e \u003cstrong\u003e0.323 kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #ff5722; margin-top: 20px; margin-bottom: 5px; border-left: 4px solid #ff5722; padding-left: 8px;\"\u003e🔍 TECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eMeasurement Range:\u003c\/span\u003e \u003cstrong\u003e±3.0 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eFrequency Range:\u003c\/span\u003e \u003cstrong\u003e2 Hz to 10 kHz\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eThread Size:\u003c\/span\u003e \u003cstrong\u003e3\/8-24 UNF\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eArmor:\u003c\/span\u003e \u003cstrong\u003eIncluded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eConnector Type:\u003c\/span\u003e \u003cstrong\u003eMiniature coaxial ClickLoc with protector (Suffix 01)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eTotal Length:\u003c\/span\u003e \u003cstrong\u003e0.5 metre (Suffix 05)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eCase Length:\u003c\/span\u003e \u003cstrong\u003e4.0 inches (Suffix 40)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eUnthreaded Length:\u003c\/span\u003e \u003cstrong\u003e0.0 inches (Suffix 00)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eOperating Temperature:\u003c\/span\u003e \u003cstrong\u003e-40°C to +85°C (-40°F to +185°F)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315;\"\u003eWeight:\u003c\/span\u003e \u003cstrong\u003e0.323 kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #ff5722; margin-top: 20px; margin-bottom: 5px; border-left: 4px solid #ff5722; padding-left: 8px;\"\u003e❓ FREQUENTLY ASKED QUESTIONS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315; font-weight: 600;\"\u003eQ: What does each suffix in 330102-00-40-05-01-00 mean?\u003c\/span\u003e\u003cbr\u003eA: \u003cstrong\u003e00\u003c\/strong\u003e = 0.0\" unthreaded length, \u003cstrong\u003e40\u003c\/strong\u003e = 4.0\" case length, \u003cstrong\u003e05\u003c\/strong\u003e = 0.5m total length, \u003cstrong\u003e01\u003c\/strong\u003e = ClickLoc connector with protector, \u003cstrong\u003e00\u003c\/strong\u003e = no agency approval.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315; font-weight: 600;\"\u003eQ: What is the total length including cable for suffix 05?\u003c\/span\u003e\u003cbr\u003eA: Suffix \u003cstrong\u003e05\u003c\/strong\u003e indicates total probe length of 0.5 metre (1.6 feet) from tip to connector.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84315; font-weight: 600;\"\u003eQ: What connector type does suffix 01 provide?\u003c\/span\u003e\u003cbr\u003eA: Suffix \u003cstrong\u003e01\u003c\/strong\u003e provides a miniature coaxial ClickLoc connector with integral protector for secure locking.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047718092932,"sku":"330102-00-40-05-01-00","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330102-00-40-05-01-00.jpg?v=1772106720"},{"product_id":"330102-00-50-10-01-05-3300-xl-8mm-probe-bently-nevada","title":"330102-00-50-10-01-05 3300 XL 8mm Probe Bently Nevada","description":"\u003ch2\u003eBently Nevada 330102-00-50-10-01-05 Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eFull model: \u003cstrong\u003e330102-00-50-10-01-05\u003c\/strong\u003e. This 8mm probe measures vibration and position in rotating machinery. It features a 5-inch case length and 1.0-meter cable with ClickLoc connector. The Viton® O-ring seals against 2.07 bar differential pressure.\u003c\/p\u003e\n\u003ch3\u003eCore specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThread: 3\/8-24 UNF. Max engagement 0.563 in.\u003c\/li\u003e\n\u003cli\u003eCase length: 5.0 in (50 option). Cable: 1.0 m (10 option).\u003c\/li\u003e\n\u003cli\u003eConnector: ClickLoc with IP67-rated protector (01 option).\u003c\/li\u003e\n\u003cli\u003eAgency approvals: 05 option (CSA, ATEX, IECEx).\u003c\/li\u003e\n\u003cli\u003eDC resistance: 7.59 Ω ±0.50 at 1.0 m.\u003c\/li\u003e\n\u003cli\u003eWeight: 323 g\/m (11.4 oz per meter).\u003c\/li\u003e\n\u003cli\u003eSeal: Viton O-ring for 2.07 bar (30 psi) differential pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLinear range: 0.25‑2.3 mm (10‑90 mils) at -1 to -17 Vdc.\u003c\/li\u003e\n\u003cli\u003eOptimal gap: -9 Vdc = 1.27 mm (50 mils) for radial vibration.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -62°F to +500°F (-52°C to +260°C).\u003c\/li\u003e\n\u003cli\u003eHumidity tolerance: 93% RH per IEC 68-2-3.\u003c\/li\u003e\n\u003cli\u003eSignal integrity: Supports 305 m wiring with 24 AWG shielded triad cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnvironmental ratings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtended temperature range: -62°F to +500°F.\u003c\/li\u003e\n\u003cli\u003ePressure seal: Viton O-ring resists 2.07 bar differential.\u003c\/li\u003e\n\u003cli\u003eIP67-rated connector protector.\u003c\/li\u003e\n\u003cli\u003eHumidity stable to 93% RH.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7280\/6146\/files\/3300_XL_8_mm_Proximity_Transducer_System_Datasheet.pdf?v=1739784146\" target=\"_blank\"\u003eDownload detailed product specifications PDF\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. What is the thread size and engagement?\u003c\/strong\u003e\u003cbr\u003e3\/8-24 UNF thread. Maximum engagement 0.563 inches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. What pressure rating does the seal provide?\u003c\/strong\u003e\u003cbr\u003eViton O-ring seals against 2.07 bar (30 psi) differential pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. What approvals come with this probe?\u003c\/strong\u003e\u003cbr\u003e05 option includes CSA, ATEX, and IECEx hazardous area certifications.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51047718158468,"sku":"330102-00-50-10-01-05","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/7454\/7844\/files\/330102-00-50-10-01-05.jpg?v=1771849657"}],"url":"https:\/\/www.etowonauto.com\/az\/collections\/bently-nevada-proximity-probes-cable.oembed?page=3","provider":"Etowon Auto","version":"1.0","type":"link"}